6202 Associated 500A Battery Charger Clamp Heavy Duty Coated (Pair)

Professional quality heavy duty 500 amp replacement clamps for all booster cables. Replace Associated clamps or other manufacturer's products with these professional quality insulated clamps. Clamps incorporate Associated's innovative "Flexi-Spring" for long cable life at the point it bends most. Possibly the best clamp in the industry.

• Set of Red & Black Clamp
• 500 Amp Rating
• All Copper construction Jaws
• Patented "Plastisol" Coated Clamp prevents shorting
• Flexi-Spring Cable Guards prevent cables from wearing clamp
• Replaces other OEM clamps for longer life
• Side Terminal adapters available

Clamp Rating: 500 Amp
Jaws: Copper
Insulation: Bonded "Plastisol" Vinyl
Use With Cable Gauge: 3,4,6 GA
Flexi-Spring: Yes
Replacement Jaw Kits: Yes

INSTRUCTIONS
Hold clamp open by wrap of friction tape around handles. Insert cable under clamp spring. Strip cable 1/2". Be sure wires are free of corrosion. Solder cable into copper jaw with rosin core solder and torch or heavy iron. DO NOT USE ACID FLUX OR ACID CORE SOLDER. Bolt parts into place in the sequence Illustrated

For chargers with cell test leads strip cable 3-1/2" instead of 1/2" to permit re-connection of the black #18 wire cell test lead.

Warning: This product may expose you to chemicals including lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov