PSC-2516A Schumacher Battery Charger Parts List

Schumacher PSC-2030T Repair Parts
Part No.	Description	Qty
0090026130	115 Volt Power Cord	1
0499000050	Rocker Switch 2 Position 3Terminal On-On	1
2299001288	Heatsink Board Assembly 16 VoltAGM
2299001288A	Heatsink Board Assembly 16 VoltAGM (Less Chip)
3100100032	Diode Anode on Lead 90 Amp
3199600052	Programmed IC Chip for NC2516AGM
3599000200	Battery Charger Handle
3899002546	DC Cable Set PSC-2516A
3999000033	12 Volt 50 Amp Circuit Breaker
5399100124	Ammeter Horizontal 0-30 Amp

Schumacher PSC-2516A Troubleshooting Guide
PROBLEM	POSSIBLE CAUSE	SOLUTION
Red LED doesn't light.	Charger is not plugged in.	Plug in.
	AC outlet is dead.	Plug in a lamp or other appliance to check for voltage.
Charger will not turn ON when properly connected to power.	Battery recently used in vehicle and is fully charged.	Battery doesn't need charging.
Charger will not turn OFF.	Battery has problem and will not take full charge.	Have battery checked.
	Battery is connected to application that draws small current (such as a vehicle's dome light).	Requires more time to charge: continue charging.
Schumacher User Manual Link

When a charging problem arises, make certain that the battery is capable of accepting a normal charge. Double check all connections, AC outlet for a full 120-volts, charger clips for correct polarity and the quality of the connections from the cables to the clips and from the clips to the battery system. The clips must be clean.

When a battery is very cold, partially charged or sulfated, it will not draw the full rated amperes from the charger. It is both dangerous and damaging to a battery to force higher amperage into it than it can effectively use in recharging.

*Variations of models due to production changes and parts availability are not our responsibility*No refunds on electrical components*Service should be performed only by a qualified technician*Please read all supporting documentation and safety instructions