PL2410 Solar PRO-LOGIX Intelligent Automotive Battery Charger Maintainer 10/6/2 Amp 12/24 Volt

Combining fully automatic operation, the ability to properly charge multiple automotive battery types and the added benefit of engine starting assistance, the PL2520 is the perfect charger to meet the needs of today’s and tomorrow’s professional technician. Intelligent, beneficial, safe and versatile. Plus, with the ability to properly charge virtually any lead acid battery type, it is the only charger you will need. Flooded, AGM, Gel Cell, Spiral Wound, Marine and Deep Cycle batteries all can be charged right with the PL2410.

INTELLIGENT
SOLAR PRO-LOGIX automatic battery chargers utilize an advanced charging algorithm for an optimal charge every time. Start your charging routine and walk away - PRO-LOGIX does the rest
BENEFICIAL
The PRO-LOGIX process results in improved battery condition and restored reserve capacity. Whether your battery is new or in need of reconditioning, PRO-LOGIX is the charger for you
SAFE
With Smart Clamp Technology, automatic operation and numerous built-in safety features, PRO-LOGIX battery chargers bring unsurpassed safety to your everyday battery charging needs
VERSATILE
One charger properly charges all battery types, including Conventional, AGM, Gel Cell, Spiral Wound, Marine and Deep Cycle batteries. Charge them all right with PRO-LOGIX

• 12 and 24 Volt battery charging
• 10/6/2A charge rates
• Fully automatic operation
• Advanced multi-phase charging process
• Properly charges all battery types
• Soft Start Mode for severely depleted batteries
• Recondition Mode rejuvenates distressed batteries
• Enhanced maintenance mode for ideal long term storage
• Temperature compensation for more effective charging
• Reverse Polarity Protection and Battery Fault Detection
• Data rich display provides detailed feedback during charging

Operating Voltage : 12/24 Volt
Operating Mode : Automatic
Charging Rates : 10/6/2A
Charging Phases : 7
Engine Start Assist: N/A
Enhanced Maintenance Mode : Yes
Reverse Polarity Protection : Yes
Battery Fault Detection : Yes
Battery Recondition Mode : Yes
Soft Start Mode : Yes
Temperature Compensation : Yes
Output Cable Length : 72"
Output Cable Gauge : 12 AWG
Weight : 10.7 lbs.
Warranty : 1 Year Limited

The charger uses a proprietary Multi-Stage charging process designed to optimally charge and maintain batteries. An example is shown above. The representation above shows the charging routine when charging a deeply discharged AGM battery in the 20A setting. (The charging routine for Model PL2510 is similar, simply with lower charging rates.)
ENERGIZING PHASE
The charging process includes an initial energizing mode in which the charger determines the best charging path for the connected battery. From there, the charger can enter the Fast Charge stage (most cases), Soft Start Mode, Battery Recondition Mode or stop the charging routine because unsafe battery conditions (short, etc.) are detected.
SOFT START MODE
Soft Start Mode is activated when the charger is connected to a deeply discharged battery. This mode protects the battery during the initial charge period, as the battery’s voltage rises to a more normal level, and is beneficial for the long-term health of the battery.
BATTERY RECONDITION MODE
During the Energizing Phase, if the charger detects the presence of battery sulfation, it will activate this mode. If this occurs, the CHARGING LED will flash. This indicates the charge time will be extended while the charger attempts to recondition the battery.
PRO-LOGIX PHASES 5-7: IDEAL BATTERY MAINTENANCE
A key feature of this charger is how it manages a battery that remains on the charger after a complete charge has been achieved, such as during the storage of a seasonal use vehicle. Once the charger reaches the Resting Phase, its output is virtually turned off, except to occasionally monitor battery condition. This is beneficial for the connected battery, as it reduces chemical reaction within the battery compared to traditional charger maintenance modes. This greatly reduces the chance of damaging a battery in long-term storage. In addition, in Phase 6 Exercising, we introduce a load on the battery, simulating active use, and then recharge the battery to full charge. This Exercising feature keeps the battery in optimal condition during periods of storage and non-use.
DISPLAY OPTIONS
Other than when the charger is in Exercising Phase or an Error is detected, the charger’s display will offer two options as to the information shown: Battery Voltage or Battery Percent of Charge. To change the display from one mode to the other, press the Arrow button below the display.

ADDITIONAL FEATURES

MULTIPLE BATTERY COMPATIBILITY
The charger will properly charge a wide variety of battery types, including Conventional, Maintenance Free,
AGM, Gel Cell, Spiral Wound and Deep Cycle batteries.
SMART CLAMP TECHNOLOGY
The charger will send power to the output leads only when a proper battery connection is made.
REVERSE POLARITY PROTECTION
Guards against reverse connections. POLARITY LED will light on control panel and power will not be sent to output cables if a reverse connection is sensed.
BATTERY FAULT PROTECTION
Guards against excessively charging compromised batteries. ERROR and CHARGING LED will flash indicating charging has stopped and the charger has detected a compromised battery. Conditions that cause this error include: if the battery voltage does not rise appropriately during the charging process (indicating a shorted cell) or if the maximum charge time has been exceeded.
SHORT CIRCUIT PROTECTION
Guards against shorted connections. ERROR LED will light solid on control panel and power will not be sent to output cables. This condition is triggered if the charger detects less than 1V across the clamps. See Operating Instructions Step 4 Note 2 for details regarding this feature.
OVER-VOLTAGE PROTECTION
Guards against charging errors where the charger is programmed to charge in a different voltage than the detected voltage of the battery. When this safeguard is engaged, the charger display will read “OUP”. To reset the charger, disconnect from AC outlet, reset the vehicle connections and reconnect to the AC outlet.

Warning: This product may expose you to chemicals including lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov