| Item | PartNumber | PartDescription | IREquivalent |
| 1 | | Inside Trigger Handle Assembly | 2934-A92A |
| 2 | | Grease Fitting | 130SR-188 |
| 5 | 8752 | Trigger | 834-93A |
| 6 | | Trigger Pin | 534-265 |
| 7 | 8599 | Throttle Valve Plunger | 2934-302 |
| 8 | 8598 | Throttle Valve Assembly | 2934-A50 |
| 9 | 8554 | Throttle Valve Face | 2934-159 |
| 10 | 8555 | Throttle Valve Spring | 834-51 |
| 11 | 8560 | Straight Inlet | 845-565 |
| 12 | 8556 | Air Strainer Screen | 434-61 |
| 13 | 8557 | Reverse Valve Seal | R00BR-210 |
| 15 | 8558 | Handle Gasket | 2934-283 |
| 16 | | Motor Clamp Washer | 2934-207 |
| 17 | | Rear End Plate | 2934-12 |
| 18 | 8559 | Rear Rotor Bearing | 508-97 |
| 19 | 9709 | Rotor | 2934-53 |
| 20 | 2158 | Rotor Vane (6) | 2934-42-6 |
| 21 | 9707 | Cylinder | 2934-3 |
| 22 | 8730 | Front End Plate | 2934-11 |
| 23 | 8560 | Front Rotor Bearing | 810-97 |
| 24 | | Cylinder Dowel | 2934-98 |
| 25 | | Motor Housing Assembly | 2934-A40A |
| 26 | | Reverse Valve Bushing | 2934-330S |
| 26A | 8579 | Air Port Gasket (2) | R44H-210A |
| 27 | 8350 | Air Port Gasket Retainer (2) | 2940-200 |
| 27A | 8652 | Exhaust Deflector | 2934-23A |
| 27B | 8567 | Exhaust Silencer | 2940P-311 |
| 27C | | Exhaust Baffle | 2934-124 |
| 27D | 8656 | Exhaust Gasket | 2934-223 |
| 27E | | Deflector Screw (2) | R43F-104 |
| 27F | | Name Plate | 2934-301 |
| 27G | | Name Plate Screw (4) | C32-302 |
| 28 | 8850 | Reverse Lever | 2934-658A |
| 29 | 8561 | Reverse Lock Plunger | 4U-663B |
| 30 | 8562 | Reverse Lock Plunger Spring | 4U-664 |
| 31 | | Reverse Valve Assembly | 2934-A329 |
| 32 | 8283 | Reverse Valve Bushing Seal | 85H-167 |
| 33 | | Hammer Case Assembly | 2934-A727 |
| 34 | 9338 | Hammer Case Bushing | 2934-641 |
| 34A | | Hammer Case Label | WARNING-2-99 |
| | Oversize Hammer Case Bushing | |
| | 0.005" Oversize | 293-641-5 |
| | 0.010" Oversize | 2934-641-10 |
| | 0.015" Oversize | 2934-641-15 |
| 35 | 8563 | Hammer Case Gasket | 2934-36 |
| 36 | | Hammer Case Cap Screw (4) | 834-638 |
| 37 | | Hammer Case Cap Screw Lock Washer (4) | 34U-58 |
| 38 | | Handle Cap Screw (4) | 510-638 |
| 39 | | Handle Cap Screw Lock Washer (4) | 8U-58 |
| 40 | 8851 | Hammer Frame Assembly | 2934-A703 |
| 41 | | Hammer Pin | |
| 8852A | Hammer Pin (2) with Head | 2934-704 |
| 8852B | Hammer Pin (2) with out Head | 2934-704 |
| 42 | 8137 | Hammer (2) | 2934-724 |
| 43 | | Spline Drive Anvil Assembly | 2934-A526 |
| 44 | 8143 | Socket Retaining Ball | D04-280 |
| 45 | | Retianing Ball Plunger | 845-230 |
| 46 | 8141 | Retaining Plunger Spring | 2940-231 |
| 47 | 8142 | Plunger Retainng Pin | 845-128 |
| 48 | 8033 | 1" Square Drive Anvil Standard Length | 2934-726 |
| | 1" Square Drive Anvil 6" Extended Length | 2934-314-6 |
| 49 | | Socket Retainer | RR10015S |
| 50 | | Outside Trigger Handle Assembly | 2934-A1 |
| 51 | | Trigger | 844-78 |
| 52 | | Trigger Pin | F02-15 |
| 53 | | Dead Handle | 834-48 |
| 54 | 8885 | Dead Handle Bracket | 2934-364 |
| 55 | | Dead Handle Bracket Spacer (2) | 2934-140 |
| | Horizontal Hanger | 2934-366 |
| | Horizontal Hanger Spacer (2) | 2934-140 |
| | Side Spade Handle | T15-41 |
| | Side Spade Handle Stud | 534-448 |
| | Side Spade Handle Stud Nut | 107-73A |
| | Grease Gun | R000A2-228 |
| 9961 | Tune Up Kit (includes: 3, 9, 10, 12, 13, 15, 18,20, 23, 26A [2], 27 [2], 27B, 29, 30, 32, 35) | 2934-TK3 |
| | Exhaust Deflector Kit (includes: 27A thru 27E) | 2934-K23 |
