| Item | Part No. | Part Description | IR Equivalent |
| 1 |
| Housing Assembly |
|
| 1 | 8174 | (2235TiMAX, 2235TiMAX-2 and 2235PTiMAX) | 2235MAX-A40 |
| 1 |
| (2235QTiMAX, 2235QTiMAX-2 and 2235QPTiMAX) | 2235QMAX-A40 |
| 2 |
| Nameplate/Warning Label | 2235MAX-301 |
| 3 | 8194 | Screw, Hammer Case (4) | 2235-638 |
| 4 | 9328 | Power Regulator | 2135-D249A |
| 5 | 8741 | O-Ring, Power Regulator | PS3-42 |
| 6 | 8689 | Retaining Ring | 2131-6 |
| 7 | 8101 | Ball Bearing (Cylinder) | 2131-97 |
| 8 | 8233 | Cylinder | 2235-3 |
| 9 | 8242 | Rotor | 2235-53 |
| 10 | 2063P | Vane Pack Plastic (Each) | 2235-42P |
| 10 | 2063 | Vane Pack OE (Each) | 2235-42 |
| 11 | 8248 | Wear Plate | 2235-11X |
| 12 | 8290 | End Plate | 2235-11 |
| 13 | 8304 | Ball Bearing (End Plate) | 2235-97 |
| 14 | 8234 | Hammer Case Gasket | 2235-36RD |
| 15 | 8238
| Hammer Frame | 2235-703 |
| 16 | 9896 | Hammer Kit | 2235-THK1 |
| 16 | 8250 | Hammer (2) | 2235-724 |
| 17 | 8264 | Hammer Pin | 2235-704 |
| 18 | 8277 | Anvil Standard (Ring Type Retention) | 2235-A626 |
| 18 | 8278 | Anvil 2" Extended (Ring Type Retention) | 2235-A626-2 |
| 18 | - | Anvil Assy (Pin Type Retention) | 2235P-A726 |
| 19 | 8270 | O-Ring Socket Retainer | R1A-159 |
| 20 | 8088 | Socket Retainer (1/2"Ring Type) | 231-425A |
| 19/20 | 8279 | Socket Retainer Kit(1/2" Ring Type) | 2125QTi-K425 |
| 19/20 | 9825 | Socket Retainer Kit(1/2" Pin-Type) | 2125PTi-K425 |
| 21 | 9569 | Bushing, Hammer Case | 2135-941 |
| 22 | 8330 | Hammer Case Assy | 2235TiMAX-D727 |
| 23 |
| Grease Fitting | 130SR-188 |
| 24 | 8332 | Gasket, Motor | 2235-283 |
| 25/26 | 8972 | Trigger With O-Ring(Black) | 2135-D93 |
| 25/26 | 8978 | Trigger With O-Ring(Red) | 2135-D93 |
| 26 | 9503 | O-Ring, Trigger | 2135-158 |
| 27 | 8771 | Reverse Valve Assy | 2131-A329 |
| 27A | 8771T | O-Ring, Reverse Valve(Top-Black) | 2131-168 |
| 27B | 8771B | O-Ring, Reverse Valve(Bot-tom-Blue) | 2131-167 |
| 28 | 9143 | Inlet Bushing | 2135-D565A |
| 28 | 8740 | Inlet Bushing Screen | 5RA-61 |
| 29 | 9144 | Inlet Retainer Clip | 2131-57 |
| 29A | 8594 | Inlet Clip Removal Tool | 2131-322 |
| 30 | 8624 | Inlet Parts Kit | 2135-K303 |
| 30A | 8747 | Washer | 2131-286 |
| 30B | 8745 | O-Ring, Seal | 2131-566 |
| 30C | 8739 | Throttle Spring | 2131-51 |
| 30D | 8725 | Throttle Valve | 2131-302 |
| 30E | 8734 | Valve Seat | 2131-303 |
| 30F | 8744 | Seat Support | 2131-Valve |
| 30G | 8746 | Retainer | 2131-304 |
| 31 | 9331 | Button Kit | 2135-K75 |
| 32 | -
| Silencer Wrap(2235QTiMAX, 2235QTiMAX-2 and 2235QPTiMAX) | 2235Q-311 |
| * | 9895P | Tune-up Kit (Plastic Veins) | 2235-TK1 |
| * | 9895 | Tune-up Kit (Standard Veins) | 2235-TK1 |
| * | 9896 | Hammer Kit includes: 8238,8250(2),8264(2)
| 2235-THK1 |
