| Index No. | Part No. | Description | No. Req'd |
| 1 | 6156811670 | Spring cylindrical | 1 |
| 2 | 6158713860 | Warning label | 1 |
| 3 | 2050553403 | CP plate | 1 |
| 4 | 2050553413 | Name plate | 1 |
| 5 | 6156731760 | Ring screw | 1 |
| 6 | 6159901810 | Autobalancer (for CP3850-85AB7VE & 65AB9VE) | 1 |
| 6 | 6159901940 | Autobalancer (for CP3850-85AH7VE & 65AH9VE) | 1 |
| 7 | 6155031530 | Rear flange (for CP3850-77AB7V, 85AB7V & 60AB9V) | 1 |
| 7 | 6155031640 | Rear flange (for CP3850-85AH7VE & 65AH9VE) | 1 |
| 8 | 6156080490 | Nut 5/8" UNC27 (for CP3850-77AB7V, 85AB7V & 60AB9V) | 1 |
| 9 | 6155020670 | Front flange (for CP3850-85AB7VE & 65AB9VE) | 1 |
| 9 | 6155020850 | Front flange (for CP3850-85AH7VE & 65AH9VE) | 1 |
| 10 | 6156140760 | Safety screw (for CP3850-85AB7VE & 65AB9VE) | 1 |
| 21 | 6155760660 | Vibration-damping side handle | 1 |
| 22 | C087920 | Wheel adaptor (for CP3850-77AB7V, 85AB7V & 60AB9V) | 1 |
| A | 6153942825 | Motor complete 8500 rpm (for CP3850-85AB7VE & 85AH7VE) | 1 |
| A | 6153942815 | Motor complete 7700 rpm (for CP3850-77AB7V & 85AB7V) | 1 |
| A | 6153942805 | Motor complete 6500 rpm (for CP3850-65AB9VE & 65AH9VE) | 1 |
| A | 6153942795 | Motor complete 6000 rpm (for CP3850-60AB9V) | 1 |
| A8 | 6154570570 | Governor 15,000 rpm (for CP3850-85AB9VE, 85AH7VE & 60AB9V) | 1 |
| A8 | 6154570560 | Governor 14,000 rpm (for CP3850-77AB7V & 85AB7V) | 1 |
| A8 | 6154570580 | Governor 16,000 rpm (for CP3850-65AB9VE & 65AH9VE) | 1 |
| A1 | 6153977315 | Rear End Plate Kit | - |
| - | - | Rear end plate | 1 |
| - | - | Shaft | 1 |
| - | - | Valve | 1 |
| - | - | Screw | 2 |
| - | - | Needle (2 x 8) | 1 |
| - | - | O-Ring (19.1 x 1.6) | 1 |
| - | - | Waved washer | 1 |
| - | - | Ball bearing | 1 |
| A2 | 6153977325 | Front End Plate Kit | - |
| - | - | Front end plate | 1 |
| - | - | Spacer | 1 |
| - | - | Ball bearing | 1 |
| - | - | O-Ring (35.1 x 1.6) | 1 |
| A3 | 6153977335 | Governor Housing Kit | - |
| - | - | Pin spiral (2 x 8) | 2 |
| - | - | O-Ring (15.6 x 1.78) | 1 |
| - | - | Governor housing | 1 |
| - | - | Piston | 4 |
| A4 | 2050553543 | Motor Service Kit | - |
| A7 | 6154340665 | Blade kit | 1 |
| - | - | Waved washer | 1 |
| - | - | Ball bearing | 1 |
| - | - | Ball bearing | 1 |
| - | - | O-Ring (35.1 x 1.6) | 1 |
| - | - | Pin spiral (2 x 8) | 2 |
| - | - | O-Ring (15.6 x 1.78) | 1 |
| A5 | 6154001550 | Cylinder | 1 |
| A6 | 6154261310 | Rotor | 1 |
| A7 | 6154340665 | Blade Kit | 1 |
| B | 6153900575 | Handle complete | 1 |
| B1 | 6153977355 | Inlet Kit | - |
| - | - | Spring conical | 1 |
| - | - | Ball 021 | 1 |
| - | - | O-Ring (25 x 2.5) | 1 |
| - | - | Ball seat | 1 |
| - | - | Screen | 1 |
| B2 | 6153977365 | Latch Lever Kit | - |
| - | Latch lever | 1 | |
| - | Latch lever spring | 1 | |
| - | Grooved pin (4 x 26) G02 | 1 | |
| B3 | 6153977375 | Lever Kit | - |
| - | - | Lever | 1 |
| - | - | Needle (6 x 59.8) | 1 |
| - | - | Grooved pin (4 x 36) G02 | 1 |
| - | - | Spring cylindrical | 1 |
| B4 | 6157460740 | Bushing inlet 1/2" NPT | 1 |
| B5 | 6157301910 | Inlet bushing | 1 |
| B6 | 466703 | Ball | 1 |
| C | 6153932905 | Housing complete | 1 |
| C1 | 6153974060 | Stopfinger complete | 1 |
| D1 | 6153977395 | Bevel Gear Paired Kit 1 (for CP3850-85AB7VE, 85AH7VE, 77AB7V & 85AB7V) | - |
| - | - | Pinion | 1 |
| - | - | Bevel gear | 1 |
| D2 | 6153977405 | Bevel Gear Paired Kit 2 (for CP3850-65AB9VE, 65AH9VE, & 60AB9V) | - |
| - | - | Pinion | 1 |
| - | - | Bevel gear | 1 |
| E1 | 6153977175 | Spindle 5/8" 6500 rpm (for CP3850-65AB9VE) | 1 |
| E2 | 6153977185 | Spindle H 6500 rpm (for CP3850-65AH9VE) | 1 |
| E3 | 6153977195 | Spindle H 8500 rpm (for CP3850-85AH7VE) | 1 |
| E4 | 6153977205 | Spindle 5/8" 8500 rpm (for CP3850-85AB7VE) | 1 |
| E5 | 6153977215 | Spindle 5/8" 7700 rpm (for CP3850-77AB7V & 85AB7V) | 1 |
| E6 | 6153977225 | Spindle 5/8" 6000 rpm (for CP3850-60AB9V) | 1 |
| E9 | 2050553553 | Spindle Service Kit | - |
| - | - | Ball bearing | 1 |
| - | - | Parallel key (4 x 4 x 6 x h9) | 1 |
| - | - | Locking nut | 1 |
| - | - | Grease deflector | 1 |
| E10 | 6155011290 | Spindle 5/8" for autobalancer (for CP3850-85AB7VE & 65AB9VE) | 1 |
| E11 | 6155011280 | Spindle H for autobalancer (for CP3850-85AH7VE & 65AH9VE) | 1 |
| E12 | 6155011300 | Spindle 5/8" US (for CP3850-77AB7V, 85AB7V & 60AB9V) | 1 |
| E13 | 6155011310 | Spindle 5/8" for autobalancer | - |
| F1 | 6155042115 | Guard 7" Kit (for CP3850-85AB7VE & 85AH7VE) | - |
| - | - | Guard 7" | 1 |
| - | - | Guard warning label | 1 |
| - | - | Screw hex head cap (M5 x 12) | 4 |
| F2 | 6155042125 | Guard 9" Kit (for CP3850-65AB9VE & 65AH9VE) | - |
| - | - | Guard 9" | 1 |
| - | - | Guard warning label | 1 |
| - | - | Screw hex head cap (M5 x 12) | 4 |
| F3 | 6155042135 | Guard 7" US Kit (for CP3850-77AB7V & 85AB7V) | - |
| - | - | Guard 7" US | 1 |
| - | - | Guard warning label | 1 |
| - | - | Screw hex head cap (M5 x 12) | 4 |
| F4 | 2050559613 | Guard 9" US Kit (for CP3850-60AB9V) | - |
| - | - | Guard 9" US | 1 |
| - | - | Guard warning label | 1 |
| - | - | Screw hex head cap (M5 x 12) | 4 |
| G | 6153977415 | Rotating Handle Support Kit | - |
| - | Screw hex button (M10 x 16) | 1 | |
| - | Handle bracket | 1 | |
| - | Rotating spacer | 1 | |
| H | 6153977425 | Valve Kit | - |
| - | - | Partition | 1 |
| - | - | Vlave | 1 |
| - | - | Spring conical | 1 |
| I | 6153977435 | Rotating Exhaust Kit | - |
| - | - | Rotating exhaust | 1 |
| - | - | Washer head screw | 1 |
| - | - | M4 washer curved spring | 2 |
| J | 6153977445 | Screw Kit | - |
| - | Screw hex head cap (M4 x 25) | 4 | |
| - | Drive screw | 4 | |
| - | Screw hex head cap (M5 x 12) | 4 | |
| K | 2050553433 | Global Service Kit | - |
| - | - | Latch lever spring | |
| - | - | Needle (6 x 59.8) | |
| - | - | Grooved pin (4 x 36) G02 | |
| - | - | Grooved pin (4 x 36) G02 | |
| - | - | O-Ring (25 x 2.5) | |
| - | - | Spring cylinderical | |
| - | - | O-Ring (47.35 x 1.78) | |
| - | - | O-Ring (32.1 x 1.6) | |
| - | - | Needle bearing | |
| - | |||
| 12 | 6155421040 | Nut | - |
| 13 | 6155031460 | Rear flange balancer | - |
| 15 | 6158020100 | Pin spanner (35 mm) | - |
| 16 | 6158010770 | Spanner flat | - |
| 17 | 6158020560 | Hexagon wrench (6 mm) | - |
| 18 | 6156140340 | Safety screw | - |
| 21 | 6155760660 | Vibration-damping side handle | - |
| 22 | 6159901490 | Grease gun | - |
| 25 | 6159901480 | Grease for bevel gear (1 kg) | - |
| 14 | C087920 | Wheel adapter | - |
| 11 | 6155031030 | Rear flange | - |
| 12 | 6155421040 | Nut | - |
| 15 | 6158020100 | Pin spanner (35 mm) | - |
| 16 | 6158010770 | Spanner flat | - |
| 17 | 6158020560 | Hexagon wrench (6 mm) | - |
| 18 | 6156140340 | Safety screw | - |
