Century Drive Roller Key Set. For use with Mig welders made by Century Mfg Co. Set includes both flat stock and woodruf keys for most welders, use when buying a new drive roller. Some older units had the key made into the drive roller, the new style drives rollers are slotted and require a woodruf key to lock them to the shaft.

081-055-666 Screw With Washer & Nut

131-211-100 Mig Gas Conversion Kit 2111. Includes fixed regulator, 24 Volt Solenoid, Gas hose and clamps, fittings for hose and welder.

131-211-200 Mig Gas Regulator & Hose Kit. Includes fixed regulator, Gas hose and clamps, fittings for hose and welder.

115 Volt Fan Motor Open Frame Design. Clock Wise Shaft End, mechanically reversible for universal applications.

216-053-666 Thermal Breaker

216-079-666 24 Volt Drive Motor

216-087-666 115 Volt Fan Motor W/ Leads

Gun, Mig 130 Amp 10 Ft. The 238-155-000 replaces: 238-224-000, 238-224-100, 238-155-100, 123-155-500, 4320

Lincoln Cable Conncetor Set. Precision machined from special contour extended brass. Equipped with heat and oil resistance molded covers. Easily twists into position. Model 239-052-908. One pair 3/8” brass male plugs. Fits most Century Arc and MIG welders. For cable size #4-#1

245-108-666 Potentiometer 10k Ohm

246-086-666 Century Solenoid 24 Volt Air Service, replaces 246-212-666 and 43700008, B7161370.

246-107-666 Century Knob 1-1/2" Round 1/4" Stem Diameter Black Plastic. Replaces 246-140-666

246-139-666 Century Control Knob 1-3/16" Skirted. Fits 1/4" half shaft switches.

246-212-666 Century Solenoid 24 Volt Air Service

246-258-666 Relay, 24 Volt

246-259-666 Rocker Switch DPDT Center Off. Rocker Switch, DPDT, Center Off used on the following Century welders: 117-051 (Century 83110, Century 83111, Solar 2150, Dayton 3Z913E, Dayton 3Z913F, Matco WFWMDP), 117-052 (Century 83105), 117-053 (Solar 2140, Sears Craftsman 20549), 117-055 (Matco WFFC), 117-058 (Snap-On YA217A), 117-059 (Snap-On YA219C, Matco WFW140), 117-061 (Century Powermate 83100, 117-064 (Century Powermate 83101)

246-260-000 Potentiometer 10K Ohm

310-119-500 Century Steel Drive Roller .030 .035 .045 4341. For use with steel welding wire in all Mig welders made by Century Mfg Co. Does Not Include key.

Century Drive Roller .024 .030 .035 in Part number 4323. For use with steel welding wire in all Mig welders made by Century Mfg Co. Does Not Include key.

310-154-500 Century Steel Serrated Drive Roller .045 4347. For use with Mig welders made by Century Mfg Co. Does Not Include "D" Or "Square" Stock Key.

312-045-666 Front Panel Female Receptacle Kit for many Century made welders. For matching male plugs see part # 239-052-908. Replaces part # 312-028-100.

Spindle assembly. 246-363-000 Knob, 081-055-666 Bolt Washer, 330-029-666 Spring, 312-193-000 Spindle. Spool adapter (312-110-666) is not included in this kit.

312-110-666 8" Spool Adapter. 8" spool adapter for Century made welders. Works with spindles 312-076-666 or 312-066-666. For 8" spool adapter for Lincoln Electric made welders see part # KH720

Fan Blade 6" 4 Blade CW. Same as 130007-001 Christie

Tweco Style MIG Welding Nozzle, Recessed. (1 pack). Replaces Century/Lincoln part numbers: 4348, 43480, 334-203-100, 334-203-500, 334-203-908, M15578, Magnum 100, KP21T-50, 21-50. Works with most Century and Lincoln Electric welders.

334-221-000 Trigger, Mig Gun

334-227-000 Tube, Conductor Large Id

Diffuser, Gas Mig Gun Large Id. Gas diffuser for the following MIG guns: 4320, 238-155-000, 238-155-100, 238-155-500, 238-224-000, 238-224-100.

Regulator, Gas 7-20 Cfh. Discontinued See KH738, When using the hose from the KH738, simply cut one end off the hose to attach to the barb fitting on the unit.

412-280-666 Century Copper Gun Connector Bracket

Century Drive Roller .024 .030 .035 in. For use with steel welding wire in all Mig welders made by Century Mfg Co. Does Not Include key, 071-014-908 Century Drive Roller Key Set.

860-616-908 Century Composite Aluminum Drive Roller 43240. (860-908-002) For use with soft welding wire in all Mig welders made by Century Mfg Co.

880-130-666 Drive Deck

880-217-666 Circuit Board/Heatsink Assembly

880-219-666 Circuit Board Assembly, Speed Control

KH710 Lincoln .025" Tweco Style Contact Tip (10 Pack). Same as KP11-25, KP2039-1B1, M15522, Mig023, Replaces Century and Marquette Part Numbers:4309, 43090, 334-159-000, 334-159-300, 334-159-908, M15522, KP11-25 & Others. Used on Century made welders model 117-001 to 117-090.

KH711 Lincoln .030" Tweco Style Mig Contact Tip (10 Pack). Same as KP11-30, KP2039-2B1, M15523, Mig030.  Replaces Century and Marquette Part Numbers: 4310, 43100, 334-160-000, M15523, KP11-30 & Others. Used on Century made welders model 117-001 to 117-090.

KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035. Replaces Century and Marquette Part Numbers: 4311, 43110, 334-161-000, M15524, KP11-35 & Others. Used on Century made welders model 117-001 to 117-090.

KH713 Lincoln .045" Tweco Style Mig Contact Tip (10 Pack) Replaces KP11-45, KP2039-4B1, M57242, Mig045, 43990, 334-202-300

KH727 Lincoln Nozzle, Spot Weld (each). Replaces Century Part Numbers: 4329, 43290. 334-211-000, 334-211-100, 334-211-300, 334-211-500, 334-211-908, KP1956-1, KP21-62-FAS.

The KH738 Lincoln Electric Mig Shielding Gas Kit is required when changing from Flux-Cored to MIG welding. Kit includes: Harris made 601-AR60-580 regulator and 10 ft. of 3/16 hose Assembly. Kit will work in place of 334-285-000, 334-285-666, 334-286-000, 334-286-666, 334-303-001, KH738, 3000290, S28505, K586-1, 3000290, 3000322, KH738. For Century made welders, remove one of the brass fittings off the hose. The hose will then slide onto the hose barb.

Mig Gun Liner .035 - .045 15Ft, For most Century Solar and small Lincoln welders. Replaces KP1937-1, 4331, 334-229, 334-373 Steel Liners. For Aluminum See KP1959-1 (4325, 334-230, 334-374) - Teflon Liner.

S18475 Power Cord for the following Century Welders & Lincoln Welders. 117-051, 117-052, 117-058, 117-059, 117-061, 117-064 and others. Does not have ears for retaining screws. Replaces 248-226-000, 248-227-000, 4040