MC1B TPI Surface Mount Micro Clip Black 1 Micro Clip Only

Access 0.3mm or 1.27mm Pitch Leads. Allows you to attached the clip to a lead on the smallest of surface mount IC’s. Normal oscilloscope lead tips are too large and the probe handle is too heavy to access these leads. Gold-Plated hood and contact Ensure minimal signal loss and constant contact with highly conductive gold plating. Fluorine Resin coated barrel extension. The barrel of the clip is fully insulated eliminating the chance of clip shorting together.

DESCRIPTION AND COLOR CHOICE SETSPart No.DescriptionPackage IncludesNANO CLIPS 0.3 mmNC2BRblack, red2 clips, 2 lead sets, and ground leadNC6BRblack, red6 clips, 3 lead sets, and ground leadNC6Rred6 clips, 3 lead sets, and ground leadNC6Bblack6 clips, 3 lead sets, and ground leadNC6Yyellow6 clips, 3 lead sets, and ground leadNC6CBIueblue6 clips, 3 lead sets, and ground leadNC6Ggreen6 clips, 3 lead sets, and ground leadNC6GYgray6 clips, 3 lead sets, and ground leadNC12assorted12 clips, 6 lead sets, and ground leadNC1Bblack1 clipNC1GYgray1 clipNC1Yyellow1 clipNC1Ggreen1 clipNC1Blueblue1 clipNCGroundground1 leadNCHothot1 leadNCDualdual lead1 leadLC85lead out contactUse with 24-28 AWG wire (solder type)LC65lead out contactUse crimp tool for Nano clips and micro clipsMICRO CLIPS 1.27 mmMC1Bblack1 clipMC1Ggray1 clipMC1Rred1 clipMC6assorted6 clipsMC12assorted6 clips, 3 lead sets, and ground lead

Warning: This product may expose you to chemicals including lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov