- Field calibrateable to ±2°F
- Easy-to-read LCD
- Data Hold for hard to reach areas
- Penetration tip
- Auto off
- 3.1 mm stem for fast response
- 4.9 inch stem for insertion in liquids and semi-solids
- IP Rating IP67
- 3-year limited warranty
Model 312C ApplicationsHVACR
- Ambient air
- Calibrate Thermostats
- Vents
- Compressor heads
- Registers
FOOD
- Grill and Surface Temperatures
- Serving Temperatures
ELECTRICAL
- Motor Temperatures
- Transformer Temperatures
Model 312C Specifications
- Temperature Range: -58°F to 300°F (-50°C to 150°C)
- Accuracy: +/-2°F (+/-1°C)
- Resolution: 0.1°F/°C
- Sample Rate: 1 reading every 1.5 second
- Stem Length: 4.9”
- Tip Type: Penetration
- Water Resistant: Yes
- Water Proof: N/A
- °C / °F Selectable: Yes
- Data Hold: Yes
- Auto Off: Yes
- Battery Type: LR44
Get more accurate readings by using the right tip for your themometer:
- Penetration: Use for immersion and air; air response time will be slower than if using anactual air probe.
- Chisel: Need chisel tip for surface temperatures. Penetration and/or air tips will not givean accurate surface reading.
- Air: Samples air temperatures three times faster than penetration or contact tips.
- Contact: Measures three times faster than chisel tip.
- Needle: Use for immersion and semi-solids. Low mass, quick response, small diameter penetration.
![]()
Warning: This product may expose you to chemicals including lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov