318C TPI Pocket Digital Thermometer-58°F to 300°F With Chisel Tip

TPI 318C Pocket Digital Thermometer (Chisel Tip) - TPI's Pocket Digital Thermometers measure temperatures accurately and affordably. All “C” Version Pocket Digital Thermometers can be field calibrated in 32°F ice water to ±2°F. Chisel tip to take surface, air or immersion temperatures.

A chisel tip is needed for surface temperatures. Penetration tips and/or air tips will not give an accurate surface reading.

• Field calibrateable to ±2°F
• Rugged and waterproof (IP63)
• Chisel tip
• Auto off
• Magnetic clip perfect for air duct applications
• 3-year limited warranty

HVACR

• Ambient air
• Calibrate Thermostats
• Vents
• Compressor heads
• Registers

FOOD

• Grill and Surface Temperatures
• Serving Temperatures

ELECTRICAL

• Motor Temperatures
• Transformer Temperatures

Model 318C Specifications

• Temperature Range: -58°F to 300°F (-50°C to 150°C)
• Accuracy: +/-2°F (+/-1°C)
• Resolution: 0.1°F/°C
• Sample Rate: 1 reading every 1.5 second
• Stem Length: 2.8”
• Tip Type: Chisel
• Water Resistant: Yes
• Water Proof: N/A
• °C / °F Selectable: Yes
• Data Hold: Yes
• Auto Off: Yes
• Battery Type: LR44

Get more accurate readings by using the right tip for your themometer:

• Penetration: Use for immersion and air; air response time will be slower than if using anactual air probe.
• Chisel: Need chisel tip for surface temperatures. Penetration and/or air tips will not givean accurate surface reading.
• Air: Samples air temperatures three times faster than penetration or contact tips.
• Contact: Measures three times faster than chisel tip.
• Needle: Use for immersion and semi-solids. Low mass, quick response, small diameter penetration.