Sleeve Installation Plates - Each of these dry-sleeve installation plates covers a range of bore sizes. Their reversible design makes both sides usable. The plates work with the OTC manual or 17-1/2 ton hydraulic puller/installers. (Nos. 1200, 1202, and 1203). See diagram and chart below to ensure correct sleeve selection.
![Sleeve Insatallation Plate Diagram]()
Fits Sleeves From
| A | B | C | OTC
Number
|
3-3/16" to 3-7/16"
| 3-7/8" | 3.171" | 3.421" | 1252 |
3-9/16" to 3-7/8"
| 4-1/4" | 3.546" | 3.859" | 1253 |
4-1/8" to 4-3/8"
| 4-3/4" | 4.109" | 4.359" | 1254 |
4-3/8" to4-3/4"
| 5-1/4" | 4.390" | 4.734" | 1255 |
4-13/16" to 5-3/4"
| 6-3/8" | 4.797" | 5.734" | 1256 |
Warning: This product may expose you to chemicals including lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov