View CartMy Account / Order StatusHelp

Join our mailing list!



(Your shopping cart is empty)
You are here: Home > Welder Parts - MIG > 117-037 83160 Century 160 Amp MIG Welder (Phase-Control)

117-037 83160 Century 160 Amp MIG Welder (Phase-Control)


ITEM PART NO. DESCRIPTION
1 245-145-666 Resistor
2 880-041-888 Drive Transformer
3 213-018-666 Capacitor
4 410-190-666 Buss Bar
5 880-248-666 Rectifier/Fan Bracket Assembly (Includes #10,#11)
6 216-099-666 Fan Motor
7 410-594-666 Base
8 216-062-666 Triac Relay
9 316-010-666 Fan Blade
10 214-004-666 Diode
11 216-053-666 Thermostat
12 410-387-010 Back Panel
13 248-165-666 Power Cord With Strain Relief
14 246-212-666 Gas Solenoid
15 880-113-666 Control Circuit Board Assembly
16 410-674-010 Drive Deck
17 312-066-666 Bolt, Spindle, Spring, Washer, And Tensioner Knob
18 246-363-666 Tensioner Knob, Washer, And Spring
19 312-110-666 Spool Adapter
20 239-123-666 Inlet Guide Tube
21 239-102-666 Terminal Block
22 4347 4323 Drive Roller (.045 Serrated) Drive Roller (.024/.030-.035)
23 880-111-666 Drive Tensioner Assembly
24 880-130-666 Drive Base W/Nut
25 246-326-666 Knob
26 412-465-666 Gun Connector
27 412-464-666 Copper Jumper
28 246-142-666 Circuit Breaker
29 880-035-666 Wiring Harness
30 216-089-666 Drive Motor
31 246-371-666 Power Switch <117-037-905 8. U7-037-903A)

216-042-666 Power Switch For All other 117-037'S
32 880-052-666 Heat/Wire Speed Harness With Potentiometers
33 880-249-888 Transformer
34 860-670-888 Reactor
35 410-806-060 Front Panel For 117-037-903A
36 246-095-666 Knob 1 1/2' Diameter
37 880-114-666 SPDT Stitch Circuit Board
38 246-094-666 Knob 1' Diameter
39 312-046-666 Receptacle
40 238-160-666 Jumper W/ Strain Relief
41 238-009-500 Ground Cable Assembly 10' With Clamp (Not Shown)
42 KH525 Ground Clamp (Not Shown)
43 410-391-010 Right Side Panel <Not Shown)
44 410-392-010 Left Side Panel (Not Shown)
45 410-390-010 Hood (Not Shown)
46 246-103-666 Handle Assembly (Not Shown)
47 238-283-100 Gun Assembly 10' (Not Shown)
48 334-286-666 Gas Regulator (Not Shown)
49 4214 Lift Lens Helmet (Not Shown)
50 880-744-000 Gun Wiring Assembly
51 238-393-000 12' Heavy Duty Gun Assembly (4365)
52 084-019-000 Set Screw #8-32 X 1/8'
53 334-254-000 Handle Case
54 334-252-000 Conductor Tube
55 334-302-000 Handle Cap
56 KP21T-50 Nozzle, Steel (Tapered 4328)

KP21-62FAS Nozzle, Spot (Notched 4329)
57 KH710 .024 Contact Tips

KH711 .030 Contact Tips

KH712 .035 Contact Tips

KP11-45 .045 Contact Tips
58 334-363-000 Gas Diffuser
59 334-255-000 Trigger Assembly
60 KP44-3545-15 .018-045 Steel Liner (4370)

KP42N-3545-15 Teflon Liner (4368)

Sort By:
Page of 1
071-014-908 Century Drive Roller Key Set
071-014-908 Century Drive Roller Key Set
Price $5.37

Century Drive Roller Key Set. For use with Mig welders made by Century Mfg Co. Set includes both flat stock and woodruf keys for most welders, use when buying a new drive roller. Some older units had the key made into the drive roller, the new style drives rollers are slotted and require a woodruf key to lock them to the shaft. more info
213-018-666 Capacitor
213-018-666 Capacitor
Discontinued

Capacitor for Century and other Welders. Replaces Marquette 40400027 more info
214-004-666 150 Amp Diode
214-004-666 150 Amp Diode
Discontinued See 214-013-666

214-004-666 150 Amp Diode. Replaces diodes from other vendors. Marquette, Lincoln, Napa and many others. 300 Peak Reverse voltage. more info
214-013-666 Christie Automotive Rectifier Diode 150 Amp
214-013-666 Christie Automotive Rectifier Diode 150 Amp (541106-013)
Price $27.95

214-013-666 Christie Automotive Rectifier Diode 150 Amp 600 Peak reverse Volt (541106-013). Replaces diodes from other vendors. Marquette, Lincoln, Century, Napa and many others. (150K60A). more info
216-042-666 Switch, 40 Amp 250 Volt  DPST
216-042-666 Switch, 40 Amp 250 Volt DPST
Price $126.06

216-042-666 Switch, 40 Amp 250 Volt  DPST more info
216-053-666 Thermal Breaker
216-053-666 Thermal Breaker
Price $46.47

216-053-666 Thermal Breaker more info
216-062-666 Triac Relay 75 amp
216-062-666 Triac Relay 75 amp
Price $189.95

216-062-666 Triac Relay 75 amp more info
216-089-666 24 Volt Drive Motor
216-089-666 24 Volt Drive Motor
Discontinued

216-089-666 24 Volt Drive Motor. more info
216-099-666 230 Volt Ball Bearing Fan Motor
216-099-666 230 Volt Ball Bearing Fan Motor
Price $122.50

Replaces 216-063-000, 216-067-000, 216-072-000, 216-085-366, 216-085-666. For fan blade see 316-010-000. more info
238-009-500 Century Ground Cable & Clamp 12 Foot (4007)
238-009-500 Century Ground Cable & Clamp 12 Foot (4007)
Price $89.66

238-009-500 Century Ground Cable & Clamp 12 Foot 2 Gauge cable with Dinse Type Machine Plug (4007) more info
238-283-100 Mig Gun Assembly 10'
238-283-100 Mig Gun Assembly 10'
Discontinued See 238-393-000

238-283-100 Mig Gun Assembly 10' more info
238-393-000 Gun, Mig 225 Amp 12 Ft
238-393-000 Gun, Mig 225 Amp 12 Ft
Price $399.95

12' HD Mig Gun with Century rear end. Rating: 225 amps with C25 gas, 240 amps with CO2 @ 60% duty cycle. Can be used on the following models: 117-009 Century Maintenance Mig, 117-018 Century 225 (Matco WF225, Mac WS225), 117-023 Solar 2225, 117-024 Snap-On YA240, 117-035 Solar 2225, 117-042 Century 83225 (Dayton 5Z136/A/B, Marquette M02225, Matco WF225a, Mac WS225K), 117-046 Century 83226 Cutting Mig, 117-056 Snap-On YA205B), 117-062 Snap-On YA240B (Matco WFW250) more info
239-052-908 Lincoln Cable Connector, Set #4-#1 (4031)
239-052-908 Lincoln Cable Connector, Set #4-#1 (4031)
Price $89.50

Lincoln Cable Conncetor Set. Precision machined from special contour extended brass. Equipped with heat and oil resistance molded covers. Easily twists into position. Model 239-052-908. One pair 3/8 brass male plugs. Fits most Century Arc and MIG welders. For cable size #4-#1 more info
239-292-666 41007 Clamp, Ground
239-292-666 41007 Clamp, Ground
Price $25.50

239-292-666 41007 Clamp, Ground more info
246-086-666 Century Solenoid 24 Volt Air Service, replaces 246-212-666 and 43700008.
246-086-666 Century Solenoid 24 Volt Air Service
Price $115.85

246-086-666 Century Solenoid 24 Volt Air Service, replaces 246-212-666 and 43700008. more info
246-212-666 Century Solenoid 24 Volt Air Service
246-212-666 Century Solenoid 24 Volt Air Service
Discontinued See 246-086-666

246-212-666 Century Solenoid 24 Volt Air Service more info
246-326-666 Century Gun Connector Knob
246-326-666 Century Gun Connector Knob
Price $11.95

246-326-666 Century Gun Connector Knob more info
246-371-000 Switch, DPST 40 Amp
246-371-000 Switch, DPST 40 Amp
Price $72.35

246-371-000 Switch, DPST 40 Amp more info
310-119-500 Century Steel Drive Roller .030 .035 .045 4341
310-119-500 Century Steel Drive Roller .030 .035 .045 4341
Price $29.72

310-119-500 Century Steel Drive Roller .030 .035 .045 4341. For use with steel welding wire in all Mig welders made by Century Mfg Co. Does Not Include key. more info
310-122-500 Century Steel Drive Roller .024 .030 .035 4323
310-122-500 Century Steel Drive Roller .024 .030 .035 4323
Price $23.70

Century Drive Roller .024 .030 .035 in Part number 4323. For use with steel welding wire in all Mig welders made by Century Mfg Co. Does Not Include key. more info
310-154-500 Century Steel Serrated Drive Roller .045 4347. For use with Mig welders made by Century Mfg Co.
310-154-500 Century Steel Serrated Drive Roller .045 4347
Discontinued See 310-119-500

310-154-500 Century Steel Serrated Drive Roller .045 4347. For use with Mig welders made by Century Mfg Co. Does Not Include "D" Or "Square" Stock Key. more info
312-045-666 Receptacle Assembly
312-045-666 Receptacle Assembly
Price $74.50

312-045-666 Front Panel Female Receptacle Kit for many Century made welders. For matching male plugs see part # 239-052-908. Replaces part # 312-028-100. more info
312-066-666 Spindle
312-066-666 Spindle
Discontinued

Spindle assembly. 246-363-000 Knob, 081-055-666 Bolt Washer, 330-029-666 Spring, 312-193-000 Spindle. Spool adapter (312-110-666) is not included in this kit.
more info
312-110-666 Adaptor, Spool
312-110-666 8" Spool Adapter
Price $12.53

312-110-666 8" Spool Adapter. 8" spool adapter for Century made welders. Works with spindles 312-076-666 or 312-066-666. For 8" spool adapter for Lincoln Electric made welders see part # KH720 more info
316-010-000 Fan Blade
316-010-000 Fan Blade
Price $16.57

316-010-000 Fan Blade more info
334-203-000 Nozzle, 1/2 Id
334-203-000 Nozzle, 1/2 Id
Price $13.78

Tweco Style MIG Welding Nozzle, Recessed. (1 pack). Replaces Century/Lincoln part numbers: 4348, 43480, 334-203-100, 334-203-500, 334-203-908, M15578, Magnum 100, KP21T-50, 21-50. Works with most Century and Lincoln Electric welders. more info
334-221-000 Trigger, Mig Gun
334-221-000 Trigger, Mig Gun
Price $47.08

334-221-000 Trigger, Mig Gun more info
334-227-000 Tube, Conductor Large Id
334-227-000 Tube, Conductor Large Id
Price $51.29

334-227-000 Tube, Conductor Large Id more info
334-228-000 Diffuser, Gas Mig Gun Large Id
334-228-000 Diffuser, Gas Mig Gun Large Id
Price $33.61

Diffuser, Gas Mig Gun Large Id. Gas diffuser for the following MIG guns: 4320, 238-155-000, 238-155-100, 238-155-500, 238-224-000, 238-224-100. more info
334-252-000 Conductor Tube #90031 Mig Gun
334-252-000 Conductor Tube #90031 Mig Gun
Price $76.73

334-252-000 Conductor Tube #90031 Mig Gun more info
334-255-000 Trigger Assembly,  #96Kl-R Mig Gun
334-255-000 Trigger Assembly, #96Kl-R Mig Gun
Price $49.80

334-255-000 Trigger Assembly,  #96Kl-R Mig Gun more info
334-286-666 Regulator, Gas 7-35 Cfh
334-286-666 Regulator, Gas 7-35 Cfh
Discontinued See 334-303-001

334-286-666 Regulator, Gas 7-35 Cfh more info
334-303-001 Regulator, Gas 7-35 Cfh
334-303-001 Regulator, Gas 7-35 Cfh
Price $175.74

334-303-001 Regulator, Gas 7-35 Cfh more info
334-363-000 Diffuser, Gas 225 Amp
334-363-000 Diffuser, Gas 225 Amp
Price $40.63

Gas diffuser for Century HD guns.  Burning up diffusers?  Be sure to use the 334-363-000 diffuser on large (160 amp or 225 amp) Century welders.  A standard Tweco 51 will not carry the required amperage. The Tweco 90708 (334-363-000) was custom designed to reduce heat build-up and increase diffuser, tip and nozzle life. For the following mig guns:  238-191, 238-283, 238-296, 238-393, 238-397, 4365. more info
412-465-666 Mig Gun Connector Block
412-465-666 Mig Gun Connector Block
Price $51.94

Mig Gun Connector Block more info
541-278-666 Century Drive Roller .024 .030 .035
541-278-666 Century Drive Roller .024 .030 .035 # 4323
Discontinued See 310-122-500

Century Drive Roller .024 .030 .035 in. For use with steel welding wire in all Mig welders made by Century Mfg Co. Does Not Include key, 071-014-908 Century Drive Roller Key Set. more info
860-616-908 Century Composite Drive Roller 43240
860-616-908 Century Composite Drive Roller 43240
Price $27.99

860-616-908 Century Composite Drive Roller 43240. For use with soft welding wire in all Mig welders made by Century Mfg Co. more info
880-052-666 Heat And Wire-Feed Potentiometers With Harness
880-052-666 Heat And Wire-Feed Potentiometers With Harness
Price $107.55

880-052-666 Heat And Wire-Feed Potentiometers With Harness more info
880-113-666 Circuit Board Assembly, Phase Control
880-113-666 Circuit Board Assembly, Phase Control
Price $299.10

Circuit Board Assembly, Phase Control. Replaces the 860-934-000, 880-113-000, 880-154-000, 880-292, 880-292-003, 880-292-008 and others. more info
880-130-666 Drive Deck
880-130-666 Drive Deck with Arm
Price $119.40

880-130-666 Drive Deck more info
KH525 Lincoln 300 Amp Ground Clamp
KH525 Lincoln 300 Amp Ground Clamp
Price $6.30

The Lincoln Electric 300 Amp Grounding Work Clamp is designed to complete electrical circuits to help promote a positive welding arc. This clamp features wide-grip jaws to help ensure a firm connection. Helps ground your work to be welded to a good electrical (ground) earth. Will take cable sizes up to #2/0. Cable (not included) connects directly to jaws. Ensures that the work cable makes a good electrical connection with the metal being welded. Jaws have a heavy duty spring that compresses the jaws tightly against the metal object. 1-year warranty. more info
KH710 Lincoln .025" Tweco Style Contact Tip (10 Pack). Same as KP11-25, KP2039-1B1, M15522, Mig023
KH710 Lincoln .025" Tweco Style Contact Tip (10 Pack)
Price $10.10

KH710 Lincoln .025" Tweco Style Contact Tip (10 Pack). Same as KP11-25, KP2039-1B1, M15522, Mig023, Replaces Century and Marquette Part Numbers:4309, 43090, 334-159-000, 334-159-300, 334-159-908, M15522, KP11-25 & Others. Used on Century made welders model 117-001 to 117-090. more info
KH711 Lincoln .030" Tweco Style Mig Contact Tip (10 Pack)
KH711 Lincoln .030" Tweco Style Mig Contact Tip (10 Pack)
Price $10.10

KH711 Lincoln .030" Tweco Style Mig Contact Tip (10 Pack). Same as KP11-30, KP2039-2B1, M15523, Mig030.  Replaces Century and Marquette Part Numbers: 4310, 43100, 334-160-000, M15523, KP11-30 & Others. Used on Century made welders model 117-001 to 117-090. more info
KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035.
KH712 Lincoln .035" Tweco Style Mig Contact Tip (10 Pack)
Price $10.10

KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035. Replaces Century and Marquette Part Numbers: 4311, 43110, 334-161-000, M15524, KP11-35 & Others. Used on Century made welders model 117-001 to 117-090. more info
KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035.
KH713 Lincoln .045" Tweco Style Mig Contact Tip (10 Pack)
Discontinued See KP11-45

KH713 Lincoln .045" Tweco Style Mig Contact Tip (10 Pack) Replaces KP11-45, KP2039-4B1, M57242, Mig045, 43990, 334-202-300 more info
KH727 Lincoln Nozzle, Spot Weld (each)
KH727 Lincoln Nozzle, Spot Weld (each)
Price $15.00

KH727 Lincoln Nozzle, Spot Weld (each). Replaces Century Part Numbers: 4329, 43290. 334-211-000, 334-211-100, 334-211-300, 334-211-500, 334-211-908, KP1956-1, KP21-62-FAS. more info
KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035.
KP11-45 Lincoln .045" Tweco Style Mig Contact Tip (10 Pack)
Price $7.50

KP11-45 Lincoln .045" Tweco Style Mig Contact Tip (Sold Each) Replaces KH713, KP2039-4B1, M57242, Mig045, 43990, 334-202-300 more info
KP21-62-FAS Lincoln Nozzle, Spot (each)
KP21-62-FAS Lincoln Nozzle, Spot (each)
Price $13.50

KP21-62-FAS Lincoln Nozzle, Spot (each).Lincoln Electric/Century Spot Welding Nozzle (1 pack). Replaces part numbers 4329, 43290, 334-211-000, 334-211-100, 334-211-500, 334-211-908, KH727, KP1956-1, Magnum 100L, Tweco 21-62-FAS. more info
KP21T-50 Lincoln Mig Gas Nozzle Recessed Steel Welding
KP21T-50 Lincoln Mig Gas Nozzle Recessed Steel Welding
Price $13.50

KP21T-50 Lincoln Nozzle, Fixed Recess .505 in (12.8 mm) inner diameter. The nozzle protects threads and openings during the MIG welding process, directs shielding Gas around the tip and MIG wire for protection. Use when welding with shielding Gas only. Steel Welding. more info
KP45-40-15 Mig Gun Liner .035 - .045 15Ft Steel
KP45-40-15 Mig Gun Liner .035 - .045 15Ft Steel
Price $13.46

Mig Gun Liner .035 - .045 15Ft, For most Century Solar and small Lincoln welders. Replaces KP1937-1, 4331, 334-229, 334-373 Steel Liners. For Aluminum See KP1959-1 (4325, 334-230, 334-374) - Teflon Liner. more info
   
 
117-037 83160 Century 160 Amp MIG Welder (Phase-Control)
Century Tool & Equipment
4013 S. Old Hwy 94
St. Peters MO 63304
 About Us
 Let Us Repair It
 Privacy Policy
 Send Us Feedback