Century Drive Roller Key Set. For use with Mig welders made by Century Mfg Co. Set includes both flat stock and woodruf keys for most welders, use when buying a new drive roller. Some older units had the key made into the drive roller, the new style drives rollers are slotted and require a woodruf key to lock them to the shaft.

081-055-666 Screw With Washer & Nut

131-211-100 Mig Gas Conversion Kit 2111. Includes fixed regulator, 24 Volt Solenoid, Gas hose and clamps, fittings for hose and welder.

131-211-200 Mig Gas Regulator & Hose Kit. Includes fixed regulator, Gas hose and clamps, fittings for hose and welder.

216-010-666 Switch 60 Amp 230 Volt

216-062-666 Triac Relay 75 amp

Replaces 216-063-000, 216-067-000, 216-072-000, 216-085-366, 216-085-666. For fan blade see 316-010-000.

238-009-500 Century Ground Cable & Clamp 12 Foot 2 Gauge cable with Dinse Type Machine Plug (4007)

Gun, Mig 130 Amp 10 Ft. The 238-155-000 replaces: 238-224-000, 238-224-100, 238-155-100, 123-155-500, 4320

238-283-100 Mig Gun Assembly 10'

15' HD Mig Gun with Century rear end.  Rating: 225 amps with C25 gas, 240 amps with CO2 @ 60% duty cycle. Can be used on the following models: 117-009 Century Maintenance Mig, 117-018 Century 225 (Matco WF225, Mac WS225), 117-023 Solar 2225, 117-024 Snap-On YA240, 117-035 Solar 2225, 117-042 Century 83225 (Dayton 5Z136/A/B, Marquette M02225, Matco WF225a, Mac WS225K), 117-046 Century 83226 Cutting Mig, 117-056 Snap-On YA205B), 117-062 Snap-On YA240B (Matco WFW250)

12' HD Mig Gun with Century rear end. Rating: 225 amps with C25 gas, 240 amps with CO2 @ 60% duty cycle. Can be used on the following models: 117-009 Century Maintenance Mig, 117-018 Century 225 (Matco WF225, Mac WS225), 117-023 Solar 2225, 117-024 Snap-On YA240, 117-035 Solar 2225, 117-042 Century 83225 (Dayton 5Z136/A/B, Marquette M02225, Matco WF225a, Mac WS225K), 117-046 Century 83226 Cutting Mig, 117-056 Snap-On YA205B), 117-062 Snap-On YA240B (Matco WFW250)

Lincoln Cable Conncetor Set. Precision machined from special contour extended brass. Equipped with heat and oil resistance molded covers. Easily twists into position. Model 239-052-908. One pair 3/8” brass male plugs. Fits most Century Arc and MIG welders. For cable size #4-#1

239-292-666 41007 Clamp, Ground

244-070-666 Diode. For Century and Lincoln Electric welders. 244-070-666 same as M9661-1 Used on Century made Weders. Model numbers 117-018, 117-023, 117-024, 117-035, 117-036, 117-042, 117-046, 117-062 & others. M9661-1, 9SM9661-1

246-041-666 Universal Selector Knob with set screw for controls with 1/4" Stem. Replaces all knobs with 1/4" diameter shaft. Fits 1/2 shaft and 3/4 style shaft stems.

246-086-666 Century Solenoid 24 Volt Air Service, replaces 246-212-666 and 43700008, B7161370.

246-326-666 Century Gun Connector Knob

310-119-500 Century Steel Drive Roller .030 .035 .045 4341. For use with steel welding wire in all Mig welders made by Century Mfg Co. Does Not Include key.

Century Drive Roller .024 .030 .035 in Part number 4323. For use with steel welding wire in all Mig welders made by Century Mfg Co. Does Not Include key.

310-154-500 Century Steel Serrated Drive Roller .045 4347. For use with Mig welders made by Century Mfg Co. Does Not Include "D" Or "Square" Stock Key.

312-045-666 Front Panel Female Receptacle Kit for many Century made welders. For matching male plugs see part # 239-052-908. Replaces part # 312-028-100.

Spindle assembly. 246-363-000 Knob, 081-055-666 Bolt Washer, 330-029-666 Spring, 312-193-000 Spindle. Spool adapter (312-110-666) is not included in this kit.

312-110-666 8" Spool Adapter. 8" spool adapter for Century made welders. Works with spindles 312-076-666 or 312-066-666. For 8" spool adapter for Lincoln Electric made welders see part # KH720

316-010-000 Fan Blade

Tweco Style MIG Welding Nozzle, Recessed. (1 pack). Replaces Century/Lincoln part numbers: 4348, 43480, 334-203-100, 334-203-500, 334-203-908, M15578, Magnum 100, KP21T-50, 21-50. Works with most Century and Lincoln Electric welders.

334-221-000 Trigger, Mig Gun

334-227-000 Tube, Conductor Large Id

Diffuser, Gas Mig Gun Large Id. Gas diffuser for the following MIG guns: 4320, 238-155-000, 238-155-100, 238-155-500, 238-224-000, 238-224-100.

334-252-000 Conductor Tube #90031 Mig Gun

Gas diffuser for Century HD guns.  Burning up diffusers?  Be sure to use the 334-363-000 diffuser on large (160 amp or 225 amp) Century welders.  A standard Tweco 51 will not carry the required amperage. The Tweco 90708 (334-363-000) was custom designed to reduce heat build-up and increase diffuser, tip and nozzle life. For the following mig guns:  238-191, 238-283, 238-296, 238-393, 238-397, 4365.

Mig Gun Connector Block

860-616-908 Century Composite Aluminum Drive Roller 43240. (860-908-002) For use with soft welding wire in all Mig welders made by Century Mfg Co.

880-052-666 Heat And Wire-Feed Potentiometers With Harness

Circuit Board Assembly, Phase Control. Replaces the 860-934-000, 880-113-000, 880-154-000, 880-292, 880-292-003, 880-292-008 and others.

880-130-666 Drive Deck

The Lincoln Electric 300 Amp Grounding Work Clamp is designed to complete electrical circuits to help promote a positive welding arc. This clamp features wide-grip jaws to help ensure a firm connection. Helps ground your work to be welded to a good electrical (ground) earth. Will take cable sizes up to #2/0. Cable (not included) connects directly to jaws. Ensures that the work cable makes a good electrical connection with the metal being welded. Jaws have a heavy duty spring that compresses the jaws tightly against the metal object. 1-year warranty.

KH710 Lincoln .025" Tweco Style Contact Tip (10 Pack). Same as KP11-25, KP2039-1B1, M15522, Mig023, Replaces Century and Marquette Part Numbers:4309, 43090, 334-159-000, 334-159-300, 334-159-908, M15522, KP11-25 & Others. Used on Century made welders model 117-001 to 117-090.

KH711 Lincoln .030" Tweco Style Mig Contact Tip (10 Pack). Same as KP11-30, KP2039-2B1, M15523, Mig030.  Replaces Century and Marquette Part Numbers: 4310, 43100, 334-160-000, M15523, KP11-30 & Others. Used on Century made welders model 117-001 to 117-090.

KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035. Replaces Century and Marquette Part Numbers: 4311, 43110, 334-161-000, M15524, KP11-35 & Others. Used on Century made welders model 117-001 to 117-090.

KH713 Lincoln .045" Tweco Style Mig Contact Tip (10 Pack) Replaces KP11-45, KP2039-4B1, M57242, Mig045, 43990, 334-202-300

KH726 Lincoln Nozzle, Flux-Cored (each)

KH727 Lincoln Nozzle, Spot Weld (each). Replaces Century Part Numbers: 4329, 43290. 334-211-000, 334-211-100, 334-211-300, 334-211-500, 334-211-908, KP1956-1, KP21-62-FAS.

KP11-45 Lincoln .045" Tweco Style Mig Contact Tip (Sold Each) Replaces KH713, KP2039-4B1, M57242, Mig045, 43990, 334-202-300

KP21-62-FAS Lincoln Nozzle, Spot (each).Lincoln Electric/Century Spot Welding Nozzle (1 pack). Replaces part numbers 4329, 43290, 334-211-000, 334-211-100, 334-211-500, 334-211-908, KH727, KP1956-1, Magnum 100L, Tweco 21-62-FAS.

KP21T-50 Lincoln Nozzle, Fixed Recess .505 in (12.8 mm) inner diameter. The nozzle protects threads and openings during the MIG welding process, directs shielding Gas around the tip and MIG wire for protection. Use when welding with shielding Gas only. Steel Welding.

KP21T-62 Lincoln Nozzle, Aluminum (each). Century Aluminum Nozzle (1 pack). Replaces part numbers 4330, 43330, 334-210-000, 334-210-100, 334-210-300, 334-210-500.

Diffuser, Gas Mig Gun Large Id. Gas diffuser for the following MIG guns: 4320, 238-155-000, 238-155-100, 238-155-500, 238-224-000, 238-224-100.

Mig Gun Liner .035 - .045 15Ft, For most Century Solar and small Lincoln welders. Replaces KP1937-1, 4331, 334-229, 334-373 Steel Liners. For Aluminum See KP1959-1 (4325, 334-230, 334-374) - Teflon Liner.