Automotive tools & equipment

HVAC & Industrial supplies

Sales - parts -service


  Home > Air Conditioning Equipment > Filter Driers & System Protectors >

RT752C Refrigeration Technologies Check Mate Oil Analysis Tube (3 Pack)

RT752C Refrigeration Technologies Check Mate Oil Analysis Tube (3 Pack)
Due to sensitivity in test tubes, this item drop ships from the factory.
 


Product Code: RT752C
Discontinued

Description Prop65
 
Acid Test Tube
The Acid level of refrigerant gas is measured independently. Knowing the purity of Refrigerant is vital information for every service technician. The technician needs to know if the refrigerant can be (1) immediately reused, (2) needs to be cleaned-up, (3) contaminated beyond reclaiming capabilities, (4) or failed to be properly cleaned during a reclaiming process.
If the gas contains Acid, the Moisture Detector tube will stain along a graduated scale calibrated in parts per million. Detector tubes are calibrated to ARI Standards. The inline test provides quick accurate results within minutes and can prevent system failure by giving the technician positive results for Moisture.
The Checkmate method is the Industries only valid field test for measuring Acid and Moisture levels in both the Compressor Oil and any Refrigerant Gas.
Quick! Easy to Use
Simply insert a Detector Tube into the Checkmate body and connect the device up to a cylinder or on the low side of system. Detector Tubes results take less than a minute
Accurate Results
The Detector Tubes have been tested for accuracy by ETL, Intertek Testing Services, an ARI approved laboratory

Acid Moisture Oil Test Kit
Knowing the purity of Refrigerant is vital information for every service technician. The technician needs to know if the refrigerant can be (1) immediately reused, (2) needs to be cleaned-up, (3) contaminated beyond reclaiming capabilities, (4) or failed to be properly cleaned during a reclaiming process. In System Diagnostics, the tests result obtained by the Oil Detector Tube can be correlated to

The sections of the vial are the Transfer Agent and the Indicator.
A Refrigerant Vapor/Oil stream is allowed to flow into the tube. The liquid Oil will be observed wetting through the Transfer Agent. As soon as the Oil reaches the Indicator segment, the flow must be manually stopped.
The Oil test is not affected by refrigerant gas type.

The TRANSFER AGENT contains dye fractions bonded to an ion exchange resinThe ion exchange resin will release a specific dye in direct proportion to the conductance of the Oil. Ignore any color change that occurs within the Transfer Agent.

The INDICATOR segment of the Oil Detector Tube will capture and preserve the dye fraction liberated by the Transfer Agent for comparison against the Color Chart. The Indicator does not need to be fully stained. The Indicator can only hold about two (2) drops of Oil and this test only requires about one-tenth (1/10) of a drop.
Product Features

RT751M Refrigeration Technologies Check Mate Moisture Analysis Tube (3 Pack)



Browse for more products in the same category as this item:

Air Conditioning Equipment > Filter Driers & System Protectors