|
|
|
|
The EXP-1000HD from Midtronics was created specifically for the heavy-duty commercial/fleet market. Using new Dynamic Conductance Battery Testing Technology, and designed for maximum flexibility, this analyzer will quickly become your electrical diagnostic tool of choice. Specific features for commercial/fleet maintenance include battery pack testing, multiple battery routines for up to 6 batteries, special commercial battery algorithms, and application specific test parameters for system and cable drop testing.
Models: EXP-1000 HD Heavy-duty battery and system analyzer with, 15 battery test cable, DMM clamps and probes, carrying case, and stud adapters EXP-1000 HD AMP Heavy-duty battery and system analyzer with, 15 battery test cable, amp clamp, DMM clamps and probes, carrying case, and stud adapters EXP-1000 HD KIT Heavy-duty battery and system analyzer with, 15 battery test cable, IR printer, DMM clamps and probes, carrying case, and stud adapters EXP-1000 AMP KIT Heavy-duty battery and system analyzer with, 15 battery test cable, IR printer, amp clamp, DMM clamps and probes, carrying case, and stud adapters
Accessories:
A018 1A700A Amp Clamp
A028 10 DMM Test Leads With Clamps (RJ45 Connector)
A033 Stud Adapters Group 31 Battery
A087 IR Printer
A106 EXP-1000HD Carrying Case
A126 DMM Probes with Alligator Clips
A710 Midtronics Replaceable 10ft Leads With Heavy Duty Clamps (6 Pin Connector) Replaces A139
Warning: This product may expose you to chemicals including lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
|
|
|
|
|
|
|
|
|
|
|
|
|
Product Features
- Incorporates temperature measurement with deep-scan technology to improve accuracy and decisiveness across a wider range of batteries
- Battery test routine designed for multiple-battery vehicles
- Pack-test up to 6 batteries in parallel without disconnecting
- Tests 12 & 24V starting & charging systems
- Displays voltage, measured CCA, battery, starting, & charging system condition
- Full digital multimeter capabilities w/scope and infra-red temperature readings
- Cable-drop test simultaneously calculates the voltage drop across the positive and negative sides of any circuit and total circuit drop without running engine
- SD memory card allows for record keeping, data transfer, and updates
- Same tester platform required by International, Kenworth, Peterbilt, and Travel Centers of America does not provide warranty code
- Shop information & coupon programmable on printout
Designed For HD/Commercial Fleet Market
-
Battery Pack Testing
- Multiple battery routine: from 1 to 6 batteries
- Special Algorithms For 4D/8D/Group 31 Batteries
- Truck/Automotive Application Specific Parameters
- Cable Drop Testing Compensation
Program Management Tools
-
User ID System
- Enhanced Data Counters
- Results Dispersion Tracking
- Tests By User ID Tracking
- Lifetime Use Tracking
Dynamic Conductance Testing Technology
-
Advanced Electrical System Diagnostics
- Digital Signal Processing
- Direct Temperature Measurement
- Deep Scan Technology
- Amplitude Level And Ripple Pattern
- Frequency Analysis
- Open Or Shorted Diode And Open-Phase Condition Identification
DMM Functionality
-
AC/DC Volts
- Temperature
- AC/DC Amps
- Ohm meter
- Diode test
- Scope mode
- Volts/Amps mode
Advanced Electrical System Diagnostics
-
Diode Ripple Pattern Amplitude Level And Frequency Analysis
- Accurate Identification Of Open Or Shorted Diodes
- Accurate Identification Of Open-Phase Conditions
- Interactive Routines Using Dual Cable Sets
- Chassis Ground, Starter & Alternator System Voltage Drop Analysis
- Generic System Testing
Enhanced Communications Capabilities
-
IR printer option
- Data Card Read/Write Ability
-
Superior User Interface
-
Large Graphical Screen
- Scroll Bar Capability
- Alphanumeric Keypad
- Icon-Based Menus
- Hot Keys
Expandable Platform
-
Integrated SD Memory Card
- Removable Cable Sets
- Custom Expansion Capabilities
Battery Test Technology Dynamic conductance with direct temperature and deep scan technology
Applications 6 and 12 volt HD Commercial 12 and 24 volt charging system diagnostics Automotive Marine Battery (including AGM batteries)
Battery Chemistry Regular (flooded) AGM Spiral AGM Gel
Rating System CCA = 200 - 3000 DIN = 100 - 1000 EN = 100 - 3000 IEC = 100 - 1000 SAE = 100 - 3000 JIS By JIS number
Operating Temperature 32 F - 120 F (0 C - 49 C)
Measured Temperature -20 to 200 F 1.0% +/- 5 (-28.8 to 93.3 C)
DC Voltage 0 - 60 V, 0.05% +/- .03 VDC
Test Leads 4 ft cable with HD dual conductor Kelvin clamps
Display 128 x 64 pixel graphic, back-lit display
Power Requirements (6) AA Alkaline batteries (included)
Housing Material ABS plastic with Santoprene over-molds
Product Dimensions 9 " H x 4" W x 2 " D (229 x 102 mm x 51 mm)
Product Weight 1 lb (427g)
Languages English French-Canadian Spanish
Warranty Midtronics standard one-year warranty
|
EXP-1000 HD
|
EXP-1000 HD
KIT
|
EXP-1000 HD
AMP
|
EXP-1000 HD
AMP KIT
|
Test Voltage
|
6-12 Volt
|
6-12 Volt
|
6-12 Volt
|
6-12 Volt
|
EXP-1000
HD Analyzer
|
X
|
X
|
X
|
X
|
Battery Test
Cables
|
15'
|
15'
|
15'
|
15'
|
Verification
Leads
|
-
|
-
|
-
|
-
|
Amp Clamp
|
-
|
-
|
X
|
X
|
DMM Clamps
|
X
|
X
|
X
|
X
|
DMM Probe
|
X
|
X
|
X
|
X
|
Stud Adapters
|
X
|
X
|
X
|
X
|
Carring Case
|
X
|
X
|
X
|
X
|
IR Printer
|
-
|
X
|
-
|
X
|
|
|
|
|
|
|
Accessories for this product... |
|
|
|