Automotive tools & equipment

HVAC & Industrial supplies

Sales - parts -service


  Home > Schumacher Electric Battery Chargers >

SE-8050 Schumacher 6/12 Volt 300/60/30 Amp Wheeled Manual/Automotive Battery Charger Tester

SE-8050 Schumacher 6/12 Volt 300/60/30 Amp Wheeled Manual/Automotive Battery Charger Tester
 
Alternative Views:


Price $225.00


Product Code: SHUSE-8050
Qty:

Description Prop65
 
The Schumacher SE-8050 heavy-duty charter is designed for big automotive fleet operations and industrial use. Ideal for repair shops that need a lot of power and the ability to test batteries and alternators. Two rapid charge settings. Very high-output engine start assist batteries in cranking most engines under severe weather conditions. For 6 and 12 volt batteries. Fan cooled.

Heavy-Duty Transformer for Extra Power and Long Life
The industrial-sized, heavy-duty transformer in the Schumacher SE-8050 brings the power you need for fleet charging applications. An easy-to-read, color-coded amperage meter displays the current charge rate. Choose the amperage you need for your next charge from an easy-to-use rotary switch:

Timer and Hold Position
Chose the 'hold' position for continuous charging or set the timer up to 2.25 hours. To properly set the timer you must know the size of the battery in ampere hours or reserve capacity in minutes and the state of charge.

Integrated Ammeter
The ammeter indicates the amount of current measured in amperes that is being drawn by the battery. For example, In the 50 amp charge rate a typical discharged battery will initially draw approximately 50 amps. As the battery continues to charge, current will taper to 15 to 20 amps at full charge. The Start area of the meter indicates a high rate of current being drawn from the charger. When cranking an engine, the starter motor draws upwards to 200-300 amps. The meter needle will be at the extreme right side of the start area. Sometimes a battery for the first few minutes of it’s charge will draw more than 40/60 amps, in this case the needle may be within but not to the extreme right side of the start area.

Heavy Duty
Designed for rough conditions the SE-8050 is enclosed by a durable powder-coated steel case. Connect to the case are a 6-foot power cord and output cables with heavy-duty clamps, giving you a total of 12 feet of reach.
Product Features
  • Specialized single rotary switch which adjusts to all volt ranges
  • Capacity to charge 6 and 12
  • 300 amp 12 volt / 200 amp 6 volt engine start
  • Timer switch (up to 2.25 hours) with Hold position
  • Output Display: Analog meter
  • 60 amp rapid charge - charges a battery in 1/2 to 1 hour.
  • 30 amp rapid charge for very fast charging - charges in 1 to 2 hours.
  • On-board battery load tester - test 50 amps on a 6 volt system, 100 amps on a 12 volt system.
  • Input Power: 120V AC @ 60Hz (12A continuous, 45A intermittent)
  • Output Power: 12/6V DC (30/60A continuous)
  • Equipped with cooling fan for high-performance and long life
  • Rugged metal case with easy-roll, wide-track wheels
  • Set of 6-ft. cables with clamps
  • Certifications: UL
  • CUL Listed - Model SF-8050
  • Warranty: 1 Year


Browse for more products in the same category as this item:

Schumacher Electric Battery Chargers
Battery Charging Equipment > Wheeled Battery Chargers - Manual Operation
Battery Charger Parts > Schumacher Battery Charger Repair Parts > SE-8050 Schumacher Battery Charger Parts List (Old Style)
Battery Charger Parts > Schumacher Battery Charger Repair Parts > SE-8050 Schumacher Battery Charger Parts List (New Style)