View CartMy Account / Order StatusHelp

Join our mailing list!



(Your shopping cart is empty)
You are here: Home > Commercial Jump Starting Equipment > Goodall StartAll Commercial Jump Starters > Goodall Power Centers > 5000 Series Goodall Power Centers (GPC)

5000 Series Goodall Power Centers (GPC)

THE GPC 5100 IS THE WORKHORSE OF THE POWER CENTER LINE. IT’S A 4-IN-1 SYSTEM THAT COMBINES AC GENERATOR, AIR COMPRESSOR, WELDER AND START·ALL® JUMP STARTING SYSTEM ALL IN ONE EASY-TO-INSTALL PACKAGE.

Engine

  • Electric start, air cooled Kohler Command OHV V-Twin
  • Includes 6 gal. EPA compliant side mount fuel tank (removable)
  • For CARB-compliant unit, contact customer service

DC Welding

  • DC Stick, 250 amp
  • 25' 1/0 gauge welding cables included

AC Power

  • 5,000 watt (while not welding)
  • Synchronous, brushless AC generator
  • Outlets:
    • 1 - 120 volt, 20 amp duplex
    • 1 - 120 volt, 30 amp twist lock
    • 1 - 240 volt, 20 amp twist lock

Air Power

  • 23 CFM rated at 100 psi, 150 psi max.
  • Air gauge on control panel monitors air tank pressure

Jump Starting

  • 12 volt, 700 amp; 24 volt, 400 amp
  • 30' 1/0 ga. welding cable allows flexibility and ease of use
  • 1,000 amp full-power clamps allow higher amperage flow
  • Voltage Control provides regulated voltage that is safe for vehicles and on-board electronics
  • Reverse Current Shutdown Protection protects against expensive repairs to the GPC if the unit runs out of gas
  • Reverse Polarity Protection will not allow the GPC to be turned on if the cables are not hooked up correctly
  • Polarity and low battery LED indicators confirm proper connections
  • Antizap surge protection provides safer boosting

Control Panel

  • Removable control box feature for easy remote mounting
  • Requires extension harness for distances beyond 12"
  • Control Box Dimensions: 18" W x 6" D x 12" H, bottom of unit to bottom to control box is 12"
  • Easy access to all control functions:
    • AC power outlets
    • Welding controls and ports
    • Air compressor controls and gauge
    • Engine controls and hour meter
    • Jump starting controls with quick plug connector

Installation

  • Compact and clean installation
  • Installation time is reduced and simplified with easy bolt-in packages (compared with separate components)

CHOOSE YOUR POWER: DETERMINING YOUR OUTPUT NEEDS


5100 SERIES OPTIONS & ACCESSORIES

  • 950-087 6' Control Panel Harness
  • 950-088 12' Control Panel Harness
  • 950-153 18' Control Panel Harness
  • 350-087 50' Welding Cable Upgrade
  • 450-044 50' Boosting Cable Upgrade
  • 550-056 30 CFM Air Compressor Upgrade
  • 61-130 30 gallon Vertical Mount Air Tank
  • 61-131 30 gallon Horizontal Mount Air Tank
  • 50-443 12 gallon Horizontal Mount Air Tank

BOOST·ALL® 05-100 05-100-6
SPEED
(TIME TO START)
STARTS
(NUMBER OF STARTS)
SPEND
(AVG. COST PER UNIT)

SPECIFICATIONS:


POWER CENTER 05-100 05-100-6
ENGINE Electric Start, Kohler Command OHV V-Twin Electric Start, Kohler Command OHV V-Twin
JUMP STARTING 12/24 volt, 700/400 amp 12/24 volt, 700/400 amp
WELDING OUTPUT 250 amp N/A
AC OUTPUT 120 volt, 5,000 watt, 60 Hz 120 volt, 5,000 watt, 60 Hz
CFM @ 100 PSI 23 23
CABLES 30' 1/0 ga. Jump Starting Cables / 25' 1/0 ga. Welding Cables 30' 1/0 ga. Jump Starting Cables / 25' 1/0 ga. Welding Cables
CLAMPS 1,000 amp Full Power 1,000 amp Full Power
DIMENSIONS 38" W x 55" D x 27" H
850 lbs.
38" W x 55" D x 27" H
850 lbs.
Century Tool & Equipment
4013 S. Old Hwy 94
St. Peters MO 63304
 About Us
 Let Us Repair It
 Privacy Policy
 Send Us Feedback