|
|
|
|
PRICED TO SELL - only (1) available - older stock, but brand new in original packaging . Tested by our service department and fully functional.
The Informant®2 is the only dual-purpose leak detector for detecting both combustible and refrigerant gases and is ideal for residential and commercial heating and cooling contractors. Its unique combination of state-of-the-art sensor technology, advanced software design and microprocessor-controlled circuitry offers unmatched accuracy and detection speed. The Informant®2 utilizes patented semiconductor sensor technology to detect combustible gases and a patented heated diode sensor technology to detect refrigerants. Quick Change Sensors for Instant Detection. Easily switch sensor tips in just a few seconds with no need to adjust sensitivity levels, - it’s taken care of automatically - even where high levels of background vapors or refrigerants are present. Gaining access to hard to reach areas is easy with the finely tapered sensor tip. The Informant®2 leak detector features an audible indicator with a mute option coupled with sequential LEDs to monitor increasing concentrations of refrigerant or combustible gases. The bar graph display provides visual confirmation of leak concentrations and a flashing light leak rate indicator on the probe tip helps to visually define the sampling location. Informant®2 Deluxe Kit (refrigerant and combustible gas sensors, color coded sensor tips, protective rubber boot, instruction manual, four “AA” batteries, five filters, custom soft carrying case, flash light, and hard carrying case).
Warning: This product may expose you to chemicals including lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
|
|
|
|
|
|
|
|
|
|
|
|
|
Product Features
- Detects both refrigerants and combustible gases (with respective sensor installed)
- Audible indicator with mute feature
- Sensor set at the tip for pinpoint accuracy and instantaneous response time
- Sensors are interchanged quickly and easily
- Flashing probe tip
- Dual LED Displays
- Low battery indicator
- Optional boot and flashlight
Informant®2 Deluxe Kit: Refrigerant and combustible gas sensors, color coded sensor tips, protective rubber boot, instruction manual, four “AA” batteries, five filters, custom soft carrying case, flash light, and hard carrying case.
Refrigerants Detected:
|
All CFC, HCFC and HFC
refrigerants including: R12, R22, R123, R134A and blends R404A, R408A, R409A
and R410A (i.e., any refrigerant containing Chlorine, Fluorine or Bromine
gas)
|
Combustible Gases
Detected:
|
All combustible gases
and vapors 0 to 400%
|
Warm-up Time:
|
10 seconds
|
Alarm Sensitivity:
Refrigerant Combustible
|
0.5 oz/yr (14 g/yr) of
R12 and R134a (per SAE J1627) 0.1 oz/yr (3 g/yr) of R134a (when probe tip is
held at leak source for approximately 5 seconds) Minimum 50 ppm (Methane)
|
Dimensions:
|
1.75”W x 9.62”L x 2.25”H
(4.45 cm x 24.43 cm x 5.72 cm)
|
Weight:
|
0.86 lbs (0.39 kg) with
batteries
|
Sensors:
|
|
Refrigerant Combustible
|
Heated Diode - U.S.
Patent No. 5,932,176 Patented semiconductor type. Five year typical life.
Plug in replacement
|
Probe:
|
20” (50.8 cm) maximum
length, fully extended; 3” (7.62 cm) if wrapped around instrument. Includes
LED indicator
|
Alarm Types:
|
Audible, dual visual
LED’s and flashing probe tip
|
Response Time:
Refrigerant Combustible
|
Instantaneous Instantaneous
|
Power:
|
4 AA alkaline batteries
(included) 4-5 hours, under typical intermittent operation
|
Approvals: Refrigerant
Combustible
|
SAE J1627; CE MarkUL 913
Classified, intrinsically safe for use in Class1, Division 1, Group D
hazardous areas; CE Mark
|
Warranty:
|
One year, including
sensors
|
|
|
|
|
|
|
|