100122 PROMAX Provax Black Knob

100123 PROMAX Provax Blue Knob

100124 PROMAX Provax Red Knob

1/4" Flare Filter for ProMax and MiniMax Units Designed to protect recovery systems from debris and deposits that would normally harm your unit. Large filter capacity provides long life. All steel construction with enamel finish resists corrosion and rusting.

100345 PROMAX Hose, Blue, 4" Long

113726 PROMAX ProVax Vacuum Switch

50lb. R-12 / Universal Gas Refillable Refrigerant Tank. Red Vapor Blue Liquid Ported Valve. 50 lb. capacity refrigerant tank for R-12, R-22, R-502 (universal) with 1/4" Flare fittings

Power Cord - 110 Volt 16 Gauge. For heay duty cord see 551628.

Motor Pump Coupler. Does Not Include NB3204 set screw, 535908 cap screws, or NB5662 dowel pin.

500psi Gauge (Blue), 1/8" MPT Bottom Tap Fitting, 0 To 500 PSI 500 PSI Max Pressure Scale, PSI/BAR pressure readings.

800psi Gauge (Red), 1/8" MPT Bottom Tap Fitting, 0 To 800 PSI 800 PSI Max Pressure Scale, PSI/BAR pressure readings.

535398ASM PROMAX Compressor

535908 PROMAX Motor Pump Coupler Screw 10-32 X 5/8

536770 PROMAX Compressor Major Repair Kit - All parts necessary to: replace piston seal (middle section), valve replacement (top section) and shaft seal replacement.

536772 PROMAX Piston Seal Replacement (Middle Section Of Compressor)

536774 PROMAX Valve Replacement Kit (Top Section Of Compressor)

536776 PROMAX Piston Bushing - Pin Replacement Kit

CD1201 PROMAX Condenser

CP1001 PROMAX Compressor Mount (Rg5xxx)

Valve Plate, no valves or springs. When purchasing this it is customary to purchase the rebuild kit as well, found here.

CRXTOSP1 Tank Overfill Protection Cable Shorting Plug allows the user to override the tank float safety device on most recovery units using a 3 pin brad Harrison cable. Screws in place at the cable end allowing the unit to start. (Always use a scale for accuracy when using this device) 30 & 50 pound tanks should never be filled to a level beyond 80% of tank capacity.

EL1309 PROMAX Momentary Switch

EL1310 PROMAX On/Off Switch

Axial Fan 115 volt, .43 amp 35 watt Rotary Fan, 6.375" Mounting Hole Centers. Two wire lead set for power connection 14" & 24"with 1/4" spade terminals.

1/2 Hp Ac Motor (110v) with starting relay (not available as a seperate item)

EL2800 PROMAX Pressure Sensor, Low (400 Psi)

GA1000 PROMAX Gauge Lens

This module plugs directly into the wire harness of your PROMAX Recovery unit through a plug already installed on your machine. This allows you to recover unattended with out the danger of tank overfill or the need to have a scale present to weigh the tank.

Shaft Seal Replacement Kit for CP1320 Compressor. Includes bearings, seals and o-rings and illustrated instructions.

NB1102 PROMAX #4-40 Pan Head Cap Screw For Knobs

NB3204 PROMAX Motor Pump Coupler Screw 1/4-20 X 1/4"

NB5662 PROMAX 1/8" Diameter X 1/2" Dowel Pin

Rubber Foot, Steel impregnated washer for durability.

1/4 Flare Seal Cap with anchor retention strap prevents loss when not in use.

NB7005 PROMAX 10-24 Steel Rivnut

Designed for EXtremely Fast recovery of medium and high-pressure refrigerants, including R-410A (Puron). Features include automatic 13" Low Pressure Shut off (selectable for deeper recovery), automatic high pressure cut-out switch (selectable for low or high pressure gasses), for safety and a 20% increase in flow over the RG5410A. Direct liquid recovery without damaging the compressor and an Oil-less compressor which allows for rapid transfer of large amounts of liquid.

Having a hard time keeping up with work flow in a salvage yard or appliance recycling center? Recovering refrigerant can be time consuming and difficult to manage. This exclusive package from Century allows for the recovery of refrigerant from up to 10 appliances at one time making salvage operations quick and easy.  Our package solution offers you the ability to recover 100 or more appliances a day making your work easy and profitable. Our trained staff can even custom build one for you tailored to specific needs.