Automotive tools & equipment

HVAC & Industrial supplies

Sales - parts -service

You are here: Home > Plasma Cutter Parts > YA2225 Snap-On 25 amp Plasma Cutter

YA2225 Snap-On 25 amp Plasma Cutter



YA2225 Replacement Parts List
Item No.
Part #
Description
1
260457
Support
2
260460
Left Side Panel
3
260459
Center Divider
4
B7053370
Contactor
5
251145
Rectifier
6
B7009380
Terminal Board
8
251148
Control Circuit Board
10
251150
Input Cable
11
B7005380
Pressure Switch
12
251036
Solenoid
13
B7006380
Regulator
14
B7014380
Gauge
15
260453
Fan Motor
16
260468
Capacitor
18
251153
Elbow Fitting
19
B7029380
Resistor
20
B7004380
Fitting
23
251155
Capacitor
24
251156
Thermostat
26
250975
Handle
27
260497
Control Panel
28
260461
Right Side Panel
29
260464
Transformer
30
260500
Base
31
260470
Front Panel Frame
32
251159
Ground Cable
33
251160
Torch Cable
34
B7037380
Torch Handle & Trigger
35
M15810,
YA22259,
83-662
Nozzle Holder
36
M15814,
YA22252,
83-666
Standard Nozzle, 1 mm (3)

M15805,
YA22254,
83-631
Long Nozzle, 1 mm (3)
37
M15803,
M15852,
YA22257,
83-629
Diffuser (2)
38
M15802,
YA22251,
83-628
Standard Electrode (5)

M15807,
YA22253,
83-633
Long Electrode (2)
39
B7039380
Torch Head
40
M15822,
250748,
83-675
Torch, 13 ft.
41
B7018380
Strain Relief
42
B7069370
Switch
43
247541
Warning Label
44
247542
Warning Label
45
247505
Label
46
247509
Warning Label
47
260466
Top Panel
48
260467
Rubber Mat
Sort By:
098-142-000 Synthetic Lubricant 1/4oz 4424 098-142-000 Synthetic Lubricant 1/4oz 4424

Synthetic Lubricant for plasma torch O-rings

Price $19.18
334-589-000 Swirl Ring Plasma 25 35 Amp M12149 M12150 M15852 334-589-000 Swirl Ring Plasma 25 35 Amp M12149 M12150 M15852

334-589-000 Swirl Ring Plasma 25 35 Amp M12149 M12150 M15852 - Plasma 25 35 Amp. Swirl Ring imparts a swirling current to stabilize the arc. Keep your plasma cutter working at peak performance with these replacement parts. Swirl Ring imparts a swirling current to stabilize the arc. Keep your plasma cutter working at peak performance with these replacement parts.

Price $34.95 Each
334-592-000 Electrode Plasma 25 Amp 5 Pkg Q15802 334-592-000 Electrode Plasma 25 Amp 5 Pkg Q15802

Snap-On Style Electrode. Plasma Cutting Electrodes initiate the high intensity cutting arc and provide the contact necessary for arc maintenance. Electrodes are subject to wear, causing arc to weaken or be intermittent. Internally Threaded.

Price $24.65 5 Pack
334-593-000 Nozzle Long 1.0mm 25 - 35 Amp 3pk M15805 YA22254 83-631 334-593-000 Nozzle Long 1.0mm 25 - 35 Amp 3pk M15805 YA22254 83-631

The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).

Price $18.55 3 Pack
334-594-000 Electrode Plasma Long 25 - 35 Amp 2 Pkg M15807 334-594-000 Electrode Plasma Long 25 - 35 Amp 2 Pkg M15807

Snap-On Style Electrode. Plasma Cutting Electrodes initiate the high intensity cutting arc and provide the contact necessary for arc maintenance. Electrodes are subject to wear, causing arc to weaken or be intermittent. Internally Threaded.

Price $11.25 2 Pack
334-629-000 Plasma Torch Head 25 Amp 334-629-000 Plasma Torch Head 25 Amp

Plasma Torch Head 25 Amp, This Torch is used on Models M12149, 83-382, YA2225, P10015 & Plasma 115. This Torch also replaces the M15801 and 83-627 (18’ Torch) used on models M12150, 83-329 & 3015

Discontinued
334-636-000 Plasma Torch Complete 13 Ft 25 Amp 334-636-000 Plasma Torch Complete 13 Ft 25 Amp

334-636-000 Plasma Torch, 13 Ft 25 Amp, This Torch is used on Models M12149, 83-382, YA2225, P10015 & Plasma 115. This Torch also replaces the M15801 and 83-627 (18’ Torch) used on models M12150, 83-329 & 3015. Includes Torch Head, Torch Body With Switch, Torch Cable / Hose Assembly, Nozzle Cap, Nozzle, Electrode, Swirl Ring. Some assembly required.

Discontinued
334-651-000 Nozzle Cap Plasma 25 35 Amp 334-651-000 Nozzle Cap Plasma 25 35 Amp

Nozzle Cap, Tapered Type. Nozzle Caps direct cooling air flow to the nozzle and workpiece.  334-651-000 Nozzle Cap Plasma 25 35 Amp

Each
Discontinued
334-653-000 Nozzle Short 1.0mm 25 - 35 Amp 5pk M15814 YA22252 83-666 334-653-000 Nozzle Short 1.0mm 25 - 35 Amp 5pk M15814 YA22252 83-666

The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).

Price $15.00 5 Pack
512-264-666 O-Rings 20 35 50 Amp 5pk 512-264-666 O-Rings 20 35 50 Amp 5pk

Century / Solar Package of 5 O-Rings 20 35 50 Amp plasma cutters. The rubber O ring prevents air leaks which cause erratic cutting and cooling. Same As 251194). Used on the following models: 118-023 (Century 82021, Marquette M12155, Matco PCS25) , 118-024 (Marquette M12156), 118-025 (Century 82051, Marquette M12157), Snap-On Plasma25, Snap-On Plasma50, ATD 37150, & ATD 37125. 512-264-666 same as Snap-On part # CKS251194.

Price $5.86 5 Pack
M15802 Marquette Electrode Plasma 25 Amp 5 Pkg M15802 Marquette Electrode Plasma 25 Amp 5 Pkg

Snap-On Style Electrode. Plasma Cutting Electrodes initiate the high intensity cutting arc and provide the contact necessary for arc maintenance. Electrodes are subject to wear, causing arc to weaken or be intermittent. Internally Threaded.

Price $24.65 5 Pack
M15803 Swirl Ring Plasma 25 35 Amp M12149 M12150 M15852 M15803 Swirl Ring Plasma 25 35 Amp M12149 M12150 M15852

M15803 Swirl Ring Plasma 25 35 Amp M12149 M12150 M15852 With Notches - Plasma 25 35 Amp M15852. Swirl Ring imparts a swirling current to stabilize the arc. Keep your plasma cutter working at peak performance with these replacement parts. Swirl Ring imparts a swirling current to stabilize the arc. Keep your plasma cutter working at peak performance with these replacement parts.

Price $34.95 Each
M15804 Marquette Nozzle Short 1.0mm 25 - 35 Amp 5pk M15804 Marquette Nozzle Short 1.0mm 25 - 35 Amp 5pk

The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).

Price $22.85 5 Pack
M15805 Marquette Nozzle Long 1.0mm 25 - 35 Amp 3pk YA22254 83-631 M15805 Marquette Nozzle Long 1.0mm 25 - 35 Amp 3pk YA22254 83-631

M15805 Marquette Nozzle Long 1.0mm 25 - 35 Amp 3pk YA22254 83-631 The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).

Price $18.55 3 Pack
M15807 Marquette Electrode Plasma Long 25 - 35 Amp 2 Pkg M15807 Marquette Electrode Plasma Long 25 - 35 Amp 2 Pkg

Snap-On Style Electrode. Plasma Cutting Electrodes initiate the high intensity cutting arc and provide the contact necessary for arc maintenance. Electrodes are subject to wear, causing arc to weaken or be intermittent. Internally Threaded. 334-594-000

Price $11.25 2 Pack
M15808 Marquette Torch Standoff Double Pointed Spacer M12151 M12152 M15808 Marquette Torch Standoff Double Pointed Spacer M12151 M12152

M15808 Marquette Torch Standoff Double Pointed Spacer M12151 M12152. Original double point spacer with spring tension ring and set screw.

Discontinued
M15810 Marquette Nozzle Cap Plasma 25 35 Amp M15810 Marquette Nozzle Cap Plasma 25 35 Amp

Nozzle Cap, Tapered Type. Nozzle Caps direct cooling air flow to the nozzle and workpiece.

Price $26.95 Each
M15811 Short Nozzle 0.9mm  Plasma 25 - 35 Amp 5pk M15811 Short Nozzle 0.9mm Plasma 25 - 35 Amp 5pk

The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).

Price $22.85 5 Pack
M15812 Short Nozzle 1.2mm  Plasma 25 - 35 Amp 5pk 83-664 M15812 Short Nozzle 1.2mm Plasma 25 - 35 Amp 5pk 83-664

The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).

Price $22.85 5 Pack
M15813 Nozzle Long 0.9mm 25 - 35 Amp 3pk YA5550A5 83-665 M15813 Nozzle Long 0.9mm 25 - 35 Amp 3pk YA5550A5 83-665

The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).

Price $19.65 3 Pack
M15814 Marquette Nozzle Short 1.0mm 25 - 35 Amp 5pk M15814 Marquette Nozzle Short 1.0mm 25 - 35 Amp 5pk

The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).

Price $22.85 5 Pack
   
 
YA2225 Snap-On 25 amp Plasma Cutter