TPI 1010A CO2 CO Temperature Humidity IAQ Meter With PC Data Logging Software And USB Cable - Measure ambient CO2, temperature, relative humidity, dew point, wet bulb, CO, and calculate percentage outside air. The TPI 1010A Indoor Air Quality (IAQ) Meter is a state of the art, easy to use tester designed to provide you with the necessary measurements to monitor and make adjustments to air handling devices.

Dial Thermometer Easy-to-read -40° Degrees To +160 Degrees F 1" Dial Face. Pocket-clip carrying case for protection and easy access. Temperature testing is a critical part of air conditioning and refrigeration service, and Robinair offers a full range of high quality, dependable pocket thermometers for simple temperature measurement.

Dial Thermometer 0 Degrees To 220 Degrees F 1" Dial Face. Pocket-clip carrying case for protection and easy access. Temperature testing is a critical part of air conditioning and refrigeration service, and Robinair offers a full range of high quality, dependable pocket thermometers for simple temperature measurement.

10945 Robinair Dial Thermometer 1-3/4" Face 0-220° F

1236-17-1 Cooper Bimetal Pocket Thermometer 1" Dial 5" Stem With Adjustment Sheath 25°F-125°F:  1" dial 5" stem. All 1” Pocket-tests are field adjustable and include a red, protective sheath with calibration wrench made with anti-microbial plastic and pocket clip.. The anti-microbial additive in the ABS plastic sheath inhibits the growth of bacteria on the unit. It does not protect users or others against bacteria.

1246-02-01 Cooper Bimetal Pocket Thermometer 1" Dial 5" Stem With Adjustment Sheath NSF 0/220°F:  1" dial 5" stem. All 1” Pocket-tests are field adjustable and include a red, protective sheath with calibration wrench made with anti-microbial plastic. The anti-microbial additive in the ABS plastic sheath inhibits the growth of bacteria on the unit. It does not protect users or others against bacteria.. NSF certified.

12" Wall Thermometer -40/120°F/°C w/Humidity Scale: 212 Series Wall Thermometers are 12” / 30.5 cm in diameter and available for a variety of requirements that increases employee awareness while monitoring temperature.

12" Cooler/Freezer Thermometer -10/80°F w/Humidity Scale: The 212-159 Cooler/Freezer thermometer is brightly colored and features a 12"(30.5cm) diameter. It has a HACCP reference color-zoned dial and a large black pointer for ease in viewing. This oversized wall thermometers allow easy monitoring of temperatures in critical food-related locations.

4" Stem Thermometer 3" Back Flange 0/220°F: The 2225-02 features a 2" dial diameter and 4" stainless steel stem and a back flange bezel, chrome plated with three (3) .150" diamter mounting holes equally spaced on a 2.9" diameter bolt circle.

4" Stem Thermometer 3" Back Flange -40/160°F: The 2225-03 features a 2" dial diameter and 4" stainless steel stem and a back flange bezel, chrome plated with three (3) .150" diamter mounting holes equally spaced on a 2.9" diameter bolt circle.

4" Stem Thermometer 3" Back Flange 200/1000°F: For those applications where a wide and high temperature range is needed, the 2225-05 is perfect. With a temperature range of 200° to 1000°F this thermometer can be used in burners, cookers, heaters and manifolds. The 2225-05 features a 2" dial diameter and 4" stainless steel stem and a back flange bezel, chrome plated with three (3) .150" diamter mounting holes equally spaced on a 2.9" diameter bolt circle.

2" Dial 8" Stem Thermometer w/Clip Glass Lens NSF 0/220°F/°C: The 2238 series has a tempered glass lens and features a stainless steel vessel clip. The 2238-06 is perfect for monitoring dough through the yeast-kill process. Yeast becomes dormant at 63°F / 17.2°C and works best between 80° and 95°F / 26.7° and 35°C. It is NSF certified and features a stainless steel clip.

2238-14-3 Cooper 2" Dial 8" Stem Thermometer With Clip Glass Lens NSF 50/550 °F/°C: The 2238 series has a tempered glass lens and features a stainless steel vessel clip. Model 2238-14 is perfect for monitoring dough through the yeast-kill process and features a higher range then the 2338-06 of 50° to 500°F/°C.

6" Stem Thermometer 3" Back Flange 0/220°F: The 2245-02 features a 2" diameter and 6" stainless steel stem. It features a back flange bezel, chrome plated with three (3) .150" diamter mounting holes equally spaced on a 2.9" diameter bolt circle.

6" Stem Thermometer 3" Back Flange -40/160°F: The 2245-03 features a 2" dial and 6" stainless steel stem. It features a back flange bezel, chrome plated with three (3) .150" diamter mounting holes equally spaced on a 2.9" diameter bolt circle.

9" Stem Thermometer 3" Back Flange -40/160°F: The 2255-03 features a 2" dial and 9" stainless steel stem. It features a back flange bezel, chrome plated with three (3) .150" diamter mounting holes equally spaced on a 2.9" diameter bolt circle.

255-06-1 Cooper 6" Wall/Storage Thermometer -60/120°F/°C. Wall thermometer for medium storage areas, refrigerators and walk-in freezers. Hangs on an adjustable bracket and mounting hardware. Black printing on white dial face. White polystyrene. Bimetal coil movement. 5" Diam. -60°F to +120°F temperature range.

Refrigerator/Freezer Thermometer NSF HACCP SS -20/80°F/°C: The 25HP HACCP Professional Refrigerator/Freezer thermometer hangs or stands. It features a HACCP reference dial and is NSF certified.

Twin2Pack Refr/Frzr Thermometers NSF HACCP SS -20/80°F/°C: Stainless Steel frame/bezel either hangs or stands, HACCP guidelines, 1 3/4" dial.

Holding Cabinet Thermometer NSF HACCP SS 100/175°F/°C: The 26HP Hot Holding Cabinet Thermometer can hang or stand, is NSF certified and features a HACCP reference dial and HACCP guidelines.

2790 FJC Inc. 1-3/4" Dial Thermometer (0° to 220°F). 1 3/4" Dial Thermometer: This thermometer provides readout for temperatures from 0 to 220 degrees Fahrenheit. With the 1-3/4" face and over sized numbers this unit is easy to read and it has a pocket holder with a clip.

2792 FJC Inc. 1" Dial Thermometer (0° to 220°F). 1" Dial Thermometer: This thermometer provides readout for temperatures from 0 to 220 degrees Fahrenheit. With the 1" magnified lens this unit is easy to read and it has a pocket holder with a clip.

2795 FJC Inc. Digital Thermometer -58°F To 302°F. This unit is easy to use, fast and accurate, with auto shutoff and displays readings in either Fahrenheit or Celsius. Includes battery and pocket holder with clip.

Non-Contact Thermometer

Non-Contact Thermometer

TPI 306C Pocket Digital Thermometer -  TPI's Pocket Digital Thermometers measure temperatures accurately and affordably. All “C” Version Pocket Digital Thermometers can be field calibrated in 32°F ice water to ±2°F.

TPI 306XC Auto Field Calibrated Pocket Digital thermometer for monitoring temperature in food service, electrical testing, and heating, ventilation, and air conditioning applications. Measures temperature from -50 to 150 degrees C with an accuracy of + or - 1% of the reading. Thermometer can be calibrated in an ice bath to preserve the accuracy of readings. LCD screen shows the current temperature in degrees C. Stem-style probe is 5" long and has a penetration tip for taking measurements while immersed in liquid or air.

307C TPI Pocket Digital Thermometer Calibratable With Needle Tip W/A306

TPI 310C Pocket Digital Thermometer - TPI's Pocket Digital Thermometers measure temperatures accurately and affordably. All “C” Version Pocket Digital Thermometers can be field calibrated in 32°F ice water to ±2°F.

311 TPI Food Service Digital Pocket Thermometer

TPI 312C Pocket Digital Thermometer - TPI's Pocket Digital Thermometers measure temperatures accurately and affordably. All “C” Version Pocket Digital Thermometers can be field calibrated in 32°F ice water to ±2°F.

TPI 315C Pocket Digital Thermometer - TPI's Pocket Digital Thermometers measure temperatures accurately and affordably. All “C” Version Pocket Digital Thermometers can be field calibrated in 32°F ice water to ±2°F.

316C TPI Pocket Digital Thermometer -58°F to 300°F Calibratable Without Magnets

317C TPI Pocket Digital Thermometer-58°F to 300°F With Air Tip

TPI 318C Pocket Digital Thermometer (Chisel Tip) - TPI's Pocket Digital Thermometers measure temperatures accurately and affordably. All “C” Version Pocket Digital Thermometers can be field calibrated in 32°F ice water to ±2°F. Chisel tip to take surface, air or immersion temperatures.

TPI 319C Pocket Digital Thermometer (Surface Tip) - TPI's Pocket Digital Thermometers measure temperatures accurately and affordably. All “C” Version Pocket Digital Thermometers can be field calibrated in 32°F ice water to ±2°F. Fast and accurate surface temperatures. Measures three times faster than a chisel tip.

TPI 320C Small Diameter (1.6mm) Digital Pocket Thermometer (Penetration Tip) - TPI's Pocket Digital Thermometers measure temperatures accurately and affordably. All “C” Version Pocket Digital Thermometers can be field calibrated in 32°F ice water to ±2°F.

Grill Surface Thermometer NSF 100/600°F/°C: The 3210-08 Grill Thermometer features unique grips for easy removal from the hot grill surface. It features a HACCP reference dial and is NSF certified.

TPI 323 Pocket Digital Thermometer -58° to 300°F (-50° to 150°C) (Chisel Tip)  - TPI's Pocket Digital Thermometers measure temperatures accurately and affordably. All “C” Version Pocket Digital Thermometers can be field calibrated in 32°F ice water to ±2°F.

Meat Thermometer NSF HACCP 130/190°F/°C: The 323 Meat Thermometer is NSF certified and includes a 6"/15.2cm stem. It includes HACCP minimum temperatures for poultry, ground beef & pork, and fish.

EconoTemp 323 Type K Thermocouple Instrument NSF -40/500°F/°C: The EconoTemp 32311 thermocouple thermometer was designed primarily for the foodservice industry. The slim line design fits nicely in the palm of your hand and will provide a good ergonomic grip. The addition of the molded rubber boot provides impact and water resistance. Rubber boot also has molded tabs on the side to hold and store most needle probes. Micropower design provides 4500 hours battery life.

TPI 326 Pocket Digital Thermometer (Needle Tip) - TPI's Pocket Digital Thermometers measure temperatures accurately and affordably. All “C” Version Pocket Digital Thermometers can be field calibrated in 32°F ice water to ±2°F.

TPI 320C Digital Pocket Thermometer (Contact Tip) (No Sheath) - TPI's Pocket Digital Thermometers measure temperatures accurately and affordably. All “C” Version Pocket Digital Thermometers can be field calibrated in 32°F ice water to ±2°F.

Deep-Fry Confection Paddle Thermometer Glass Tube 100/400°F/°C: The 329 Professional Deep-Fry Paddle/Confectionery thermometer features a adjustable vessel clip and black easy-to-grip plastic handle. Its non-toxic spirit-filled tube is housed in stainless steel construction.

330-0-1 Cooper Refrigerator / Freezer Tube Type Thermometer NSF -40/120 °F/°C Hook: 330 Lightweight Refrigerator/Freezer thermometer. It features a non-toxic spirit-filled glass hanging tube. The 330 is NSF certified.

The TIF3320 Series Thermocouple Thermometers easily take differential temperature readings with the dual type-K thermocouple probes plus non-contact surface temperatures using the IR thermometer probe. Use contact differential temperature measurements (T1-T2) to display HVAC Superheat measurements. Display temperature differentials between both contact and IR temperature readings (T1, T2, T3). Rugged design that is easy to grip and hold. Use the IR thermometer probe to measure non-contact surface temperatures up to 1022 °F and beads to 2501°F.

335-01-1 Cooper Refrigerator / Freezer Thermometer Horizontal Glass Tube NSF -40/80 °F/°C: 335 Horizontal Glass Tube Refrigerator thermometer features magnifying lens and hangs, stands or permanently mounts. It is NSF certified.

3406 ATD Tools 1” Dial Thermometer 0º to 220º F

Digital Thermometer -58ºF to 572ºF 4-3/4” Stainless steel stem 4-3/4”, Large LCD readout, Temperature range: -58ºF to 572ºF (-50ºC to 300ºC), Reads in both ºF and ºC.

TPI 365 K T-Type Thermocouple Thermometer with A604 Protective Boot (-328°F to 1112°F / -200°C to 600°C) (No Probes) - TPI contact temperature testers are accurate, reliable, and built to last. Models 341K, 343 and 367D can be auto field calibrated to system accuracy (tester plus probe) of +/- 1°F in less than 10 seconds in ice water.

TPI 368 Close-Focus, Pocket Size Infrared Thermometer - Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

TPI 370 Infrared (IR) Thermometer 8:1 Ratio 14° To 500°F No Laser - Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

TPI 371 Infrared (IR) Thermometer 8:1 Ratio 14° To 500°F Soft Touch - Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

373 TPI Infrared Thermometer Laser Sighting 8:1 Ratio 14 To 950 F Soft Pouch

TPI 376 Combination Non-Contact IR and Contact Thermometer -58°F to 950°F (-50°C to 510°C) IR and -40°F to 2,192°F (-40°C to 1,200°C) Contact (depending upon optional probe) with Adjustable Emissivity and Soft Pouch - Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

TPI 377 Combination Non-Contact IR and Contact Thermometer 0°F to 1,832°F (-18°C to 1000°C) IR and -40°F to 2,192°F (-40°C to 1,200°C) Contact (depending upon optional probe) with Adjustable Emissivity and Soft Pouch - Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

381A TPI Infrared Combo Thermometer With Laser -4 To 572 F 9:1 Ratio - Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably. Now with added contact probe input.

TPI 381F Non-Contact IR Thermometer -4°F to 572°F (-20°C to 300°C) 4:1 Ratio with Laser Sighting with +/- 2°F accuracy between  32°F to 158°F (the food range) - Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

TPI 383A Non-Contact IR Thermometer -31°F to 999°F (-35°C to 537°C) 8:1 Ratio with Laser Sighting - Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

TPI 384A Non-Contact IR Thermometer 0°F to 1832°F (-18°C to 1000°C) 8:1 Ratio with Laser Sighting  - Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

Robinair Thermometer Easy-to-read -40° to + 70°C 1" dial face. Pocket-clip carrying case for protection and easy access.

Using an infrared thermometer is the safest way to measure surface temperatures of hot, hard to reach, electrically energized or moving objects. It is commonly used to verify HVAC distribution, check for overheated wires, radiant heat in floors, running motors, insulation, pipes, breakers, and corroded connections. They are also excellent tools for reading ceiling duct temperatures from the floor without a ladder!

This digital thermometer gives you full-feature capabilities in a case which is small enough to fit in your shirt pocket. A wide temperature range and highly accurate readings make it useful for a variety of applications. Accurate readings from -58° F to 302° F

Digital Thermometer -58 Degrees To 302 Degrees F -50 Degrees C To 150 Degrees C

51408 Titan High Temperature -58°F To -1200°F Infrared Thermometer 8:1. Temp Range: -58ºF to 1202ºF (-50ºC to 650ºC). Built-in laser pointer. Automatic Selection 0.1ºC/1ºF. ºC/ºF switchable button. Emissivity 0.95(fixed). Automatic Data Hold & Auto power off. D:S ratio:8:1. Backlit LCD display. Max and Min function.

The Mastercool 52161 1-3/8" Pocket Thermometer is capable of measuring temperatures in the  -40 To 160° F (-40 To 70º C) range and includes a pocket holder with a clip. This is an analog unit and does not require a battery.

The Mastercool 52220 1" Pocket Thermometer is capable of measuring temperatures in the  0 To 220° F range and includes a pocket holder with a clip. It has On / Off and auto shut-off after 10 minutes. Operates on a 1.5 volt battery with a 5,000 hour battery life.

The Mastercool 52223-A 1" Pocket Thermometer is capable of measuring temperatures in the  -58 To 302° F range and includes a pocket holder with a clip. It has On / Off and auto shut-off after 10 minutes. Operates on a 1.5 volt battery with a 5,000 hour battery life.

Infrared Thermometer With Laser (12:1) Includes Free 52220

The Mastercool 52225-A Dual Temp Plus Infrared Thermometer (30:1) features both infrared and contact thermometer technologies. Includes programmable HI / LO alarm and Lock Mode to capture temperature readings. The contact function offers a built-in K type jack and wire thermocouple.

The Mastercool 52225-A Dual Temp Plus Infrared Thermometer (30:1) features both infrared and contact thermometer technologies. Includes programmable HI / LO alarm and Lock Mode to capture temperature readings. The contact function offers a built-in K type jack and wire thermocouple. Includes Free 52220.

The Mastercool 52226 Dual Temp Infrared / Probe Thermometer offers both infrared and contact probe technologies. Infrared range is -67° to 428° F, probe range is -67° to 626° F. With adjustable emissivity, lock mode, min / max capture mode and contact probe locks safely into the side of the unit for storage and transport.

The Mastercool 52227 Pocket Infrared Thermometer offers accurate non-contact temperature measurement in a compact and easy to use size. With features like, temp range of -67° to 428° F, adjustable emissivity, back-lit LCD display and min / max capture mode.

The Mastercool 52228 Digital Differential Thermometer provides instant measurement of TWO points, T1 and T2, or T1 - T2. With features like, max hold, data hold, temp in either Celsius or Fahrenheit, AUX out-put jacks, T1 - T2 differential, K type thermocouple input and it comes with two 3 ft thermocouple probes.

The Mastercool 52229 Handheld Waterproof Digital Thermometer With 96mm Probe Wire and Alarm is capable of measuring temperatures in the -58° to 572° F (-50° to 300° C) range. With features like Min / Max temperature memory, Celsius and Fahrenheit exchange, data hold, high / low temp alarm setting, key tone, stainless steel probe and a fold away stand.

The Mastercool 52230 Pen Type Hygrometer has the following features: Rotating cap to protect the sensor, LCD digital display, temp and humidity in °F or °C, min / max record, data hold and an auto-off function.

535-0-8 Cooper Cooler Thermometer With Magnet -20/120°F/°C: The 535 Cooler thermometer's magnetic back or self adhesive tabs are perfect for mounting to the underside of refrigerated glass cases. It features a 1.5"/3.4cm dial diameter.

595C1 TPI Digital Hygro-Thermometer Relative Humidity (Rh) Temperature Carrying Case

TPI 597C1 Digital Hygrometer / Psychrometer - The TPI 597 digital hygrometer / psychrometer is a state of the art, easy to use humidity tester designed to display ambient, dew point, and wet bulb temperature as well as humidity. The instrument is ruggedly constructed and comes with a 3 Year Guarantee.

6142-06-3 Cooper Panel Thermometer 2" Dial Front Flange 48" Cap Back Connection NSF 40/240°F/°C: The 6142-06 features a front flange, back connect, flush mount. It has a 2" dial diameter and 48" capillary. It features three (3) .156" diameter mounting holes equally spaced on 2.625" diameter bolt circle. It is NSF certified.

6142-20-3 Cooper Panel Thermometer 2" Dial Front Flange 48" Cap Back Connection NSF -40/60°F/°C: The 6142-20 features a front flange, back connect, flush mount. It has a 2" dial diameter and 48" capillary. It features three (3) .156" diameter mounting holes equally spaced on 2.625" diameter bolt circle. It is NSF certified.

This new infrared thermometer features a double injection housing, found only on the highest quality units. The front panel controls allow switching the F and C, backlight and laser on/off without flipping the handle. Lower quality units can not switch the F, C, or Laser from the front panel, as the controls generally reside beneath the handle in the battery compartment. Temperature Range: -58 to 1022F (-50 to 500C). Carrying case included.

6812-01-3 Cooper Panel Thermometer 2" Dial Back Flange 48" Cap Back Connection NSF -40/60°F/°C: The 6812-01 features a back flange, back connect, surface mount. The back flange has 3.160" diameter bolt circle and projects 1.2" from panel. It has a 2" dial diameter and 48" capillary length.

6812-02-3 Cooper Panel Thermometer 2" Dial Back Flange 48" Cap Back Connection -40/120°F/°C: The 6812-02 features a back flange, back connect, surface mount. The reverse flange has 3.160" diameter bolt circle and projects 1.2" from panel. It has a 2" dial diameter and 48" capillary length.

This compact unit measures from -58° to 392°F (-50° to 200°C) and triggers an alarm at the high and low programmed temperatures. No calibration required, reads °F/°C switchable, Features Data hold function, Key tone for operation confirmation and maximum/minimum temperature memory. Includes a foldaway stand and performs an automatic self test after battery installation for dependability.

Pocket Infrared Thermometer -27º to +428ºF  The TIF 7201 Pocket Infrared Thermometer offers accurate non-contact temperature measurement in a compact and easy to use size.

An infrared thermometer measures temperature by sensing the magnitude of radiated energy at infrared frequencies. Using this data and the actual temperature of the detector, the thermometer calculates the temperature of the surface that emitted the energy. To measure a surface temperature, the user aims the IR Thermometer at the target, presses a button, and reads the temperature display. The 7610 TIF has an optical lens that collects the radiated infrared energy from the object and focuses it on the detector. The detector converts the energy into an electrical signal that's amplified and displayed as a temperature reading.

To measure a surface temperature, the user aims the IR Thermometer at the target, presses a button, and reads the temperature display. The device has an optical lens that collects the radiated infrared energy from the object and focuses it on the detector. The detector converts the energy into an electrical signal that's amplified and displayed as a temperature reading.

To measure a surface temperature, the user aims the IR Thermometer at the target, presses a button, and reads the temperature display. The device has an optical lens that collects the radiated infrared energy from the object and focuses it on the detector. The detector converts the energy into an electrical signal that's amplified and displayed as a temperature reading.

Pocket Test Thermometers (1 3/4") (0 To 220° F)

Thermometer/Adapter Kit

Pan/Vessel Clip 37-56 for 1/8" Diameter Stem Thermometer: Stainless Steel Pan/Vessel Clip 37-2D for 1/8" Diameter Stem Thermometer

9366 Cooper Stainless Steel Panel / Vessel Clip 37-2B for 1/4" Diameter Stem Thermometer

A32555 JB Industries Digital Thermometer

A340 TPI Soft Carrying Case For 340 And 350 Series Thermometers

A368C3 TPI Soft Pouch With Velcro Belt Loop For Pocket Digital Thermometers And 368

CT220 Cooper Bimetal Pocket Dial Thermometer With Adjustment Sheath 0/220°F (Each): 1" dial 5" stem. All 1” Pocket-tests are field adjustable and include a red, protective sheath with calibration wrench made with anti-microbial plastic. The anti-microbial additive in the ABS plastic sheath inhibits the growth of bacteria on the unit. It does not protect users or others against bacteria.

DFP450W-0-8 Cooper Digital Pocket Thermometer Waterproof 4.5" Stem NSF -40/450°F/°C: Our DFP450W Digital Pocket Test with adjustable Temperature Alarm was specifically designed for the harshest foodservice environments. The Instrument can be programmed to provide a visual alarm (blinking display) once the set temperature is reached. The initial default alarm temperature is 140oF (60oC). Potentially hazardous mercury thermometers are often used to check the extreme water temperature of commercial dish water. Eliminate the risk of a mercury spill; the DFP450W stores the maximum heat registered and is waterproof. Guaranteed Accurate for Life means there is no need of field adjusting of calibration settings and no risk of introducing error into the instrument.

Digital Panel Thermometer 2" Front Flange 39" Cord NSF -40/120°F/°C: The DM120 Digital Remote Panel thermometer features a front flange surface mount and is NSF certified. The removable lens makes battery replacement easy.

Digital Panel Thermometer 2" Back Flange 39" Cord -40/120°F/°C: The DM120S Digital Remote Panel thermometer features a back flange surface mount. The removable lens makes battery replacement easy.

Digital Panel Thermometer 2" Front Flange 39"Cord -40/450°F: The DM450 features a 2" diameter polycarbonate lens and is stainless steel with bright buffed finish. Front flange with three (3) .156" diameter holes equally spaced on a 2.625" diameter bolt circle.

DPP400W-0-8 Cooper Digital Pocket Thermometer Waterproof Pen Style 2.75" Stem NSF -40/392°F/°C: This waterproof digital thermometer is NSF certified and has automatic shut-off. Designed with anti-microbial additive to avoid bacteria growth and reduced stainless steel tip for a quick response time.

DPS300-01-8 Cooper Digital Pocket Thermometer Swivel Head 5" Stem -40/302°F/°C: Most Digital Pocket Tests in today’s market either don’t have a swivel head, or swivel 90° or less. The unique DPS300-01 allows you to swivel 90° in either direction for a total of 180°. This Swivel Head design will stop at 30°, 45°, 60° or 90° increments, in both directions, allowing for easier temperature readings at any angle. It has a Stainless Steel stem with a Reduced Tip Design which gives you faster response times. A protective pocket sheath is included. Now the DPS300-01 will re-start in the last °F or °C temperature mod last used. Saving time and making the DPS300-01 more user friendly.

Digital Timer & Temperature Alarm w/Thermistor Probe 32/392°F/°C: Have you ever cut into a roast or turkey in the oven to see if it has finished cooking It's an inconvenience, especially if you have to do it several times and can also affect the appearance of your finished product. So save yourself time (and the appearance of your food) by picking up the Cooper commercial electric cooking thermo-timer. The DTT361 thermo-timer is made especially for foods cooked with ovens, deep fryers, deep broilers, and grills. The DTT361 digital thermo-timer is made from stainless steel and has a heat-resistant probe with an alarm and 3 ft. wire cable. A Temperature range of 32 to 392 F (0 to 200 C), operates on AAA batterys. Heat resistant, stainless steel probe that inserts into the food while the oven door closes tightly over its specially designed silicone-jacketed probe cord. The cord will not fray or allow moisture to penetrate inside. Once the desired temperature and / or time setting is reached, an alarm sounds.

The JL3KH6 Fieldpiece Job Link Wireless Charge and Air Kit allows the technician to take a full system snapshot quickly and easily. This kit consists of 2 pressure probes, 2 pipe clamps, and 2 psychrometers in a quick access padded case. All measurements can be sent up to 1000' away directly to your mobile device with the Job Link™ app, Measurement Range of -4°F to 140°F (-20°C to 60°C) & 0 %RH to 100 %RH. Each tool is designed for agility and speed. The pressure probes fit into tight spaces. The pipe clamps use the new Rapid Rail™ sensor design delivering accuracy, speed, and agility, even on the most awkward pipe configurations. The psychrometers’ flexible narrow probes and configurable magnet make it easy to measure supply plenums, ducts, and elevated registers. Do more with Job Link™ probes!

The JL3KR4 Fieldpiece Job Link Wireless Charge Kit allows the technician to take a full system snapshot quickly and easily. This kit consists of 2 pressure probes and 2 pipe clamps in a quick access padded case. All measurements can be sent up to 1000’ away directly to your mobile device with the Job Link™ app, Measurement Range of -4°F to 140°F (-20°C to 60°C) & 0 %RH to 100 %RH. Each tool is designed for agility and speed. The pressure probes fit into tight spaces. The pipe clamps use the new Rapid Rail™ sensor design delivering accuracy, speed, and agility, even on the most awkward pipe configurations. Do more with Job Link™ probes!

The MiniTemp MT4 is the ideal introduction to handheld noncontact thermometers for technicians. The MiniTemp MT4 unit features the popular single dot laser sighting system and the large temperature display provides current and maximum readings together while scanning, all in a conveniently sized handheld tool. The MiniTemp MT4 provides great ways to solve common temperature measurement problems, and are small enough to fit in your pocket!

PDT550 Universal Enterprises Pen Style Digital Thermometer Measures from: -58 to +571º (-50 to +300ºC), waterproof, built in magnetic mount, minimum and maximum temperatures, HOLD freezes the current temperature reading, easy access battery compartment, enhanced accuracy of digital circuitry. Includes battery, and multipurpose probe cover. Three year limited warranty.

Digital Panel Thermometer 2.6" x 1.4" -40/120°F/°C: When mounting space is limited, the digital PM120 is ideal. The rectangular mini remote reading thermometer is F/C switchable. It features Max/Min and On/Off.

PRH2 Fieldpiece Digital Psychrometer - For real-time, instant readings techs use everyday, this pocket digital psychrometer is a must have for every HVACR professional.  Wet bulb, dry bulb, dew point, and %RH are shown on the backlight, dual display, and measurements can be taken either in the duct, or while walking around.

SH66A-E Cooper 3 Zone Temp Probe With 1075 2010 & 4011 Probes -40/300°F/°C was designed for applications when multiple temperature measurements are needed, this is the instrument to use. Features include: a backlit display for dark environments; a sealed keypad which protects the instrument from spills and dust; and a battery eliminator jack. Simultaneously measure suction and liquid line temperatures, as well as temperatures across condensing coils, evaporator coils and ambient temperatures. View temperature differential between zones 1 and 2 and review min / max temperatures from all three zones. The Constant Scan feature records the min/max temperature from three probes allowing the technician to monitor critical temperatures remotely while completing other tasks. 3 Zone Thermistor Temp Instr w/1075 2010 & 4011 -40/300°F/°C

SIG1 Fieldpiece Gun Style Infrared (IR) Thermometer - Among our most popular IR thermometers the SIG2 Gun-Style Thermometer features a 10:1 field of view. A bright blue backlight and laser guide make taking fast and accurate temperature readings easier, better and faster. The SIG1 comes with a protective lens cap and body wrap. It works faster than thermistor-based temperature instruments and has a range of -22°F to 1022°F. Includes Auto-Power Off to conserve battery life.

SIL2 Fieldpiece Pen Style Infrared (IR) Thermometer with LED Flashlight - The SIL2 is among our most accurate IR thermometers. With a 1:1 field of view and a protective IR lens cap, the SIL2, is as small as a pen and delivers big results. Features automatic data hold, measurements in °F or °C, and has excellent accuracy: ±1.5°F and a resolution of 0.5°F. The SIL2 has a range of -27°F to 230°F and includes Auto-Power Off (APO) to conserve battery life.

SIP3 Fieldpiece Shirt Pocket Infrared (IR) Thermometer - The SIP3 is great for quick air register temps. With a 1:1 field of view, the compact design makes taking accurate temperature readings easier, better and faster. The SIP3 has a 1°F/°C resolution and has a -27°F to 230°F temperature range and features Auto-Power Off (APO) to conserve battery life. It also has a rubberized grip, low battery indicator, and is water resistant.

SIR2 Fieldpiece Infrared Thermometer with Laser Sight - The SIR2 Infrared Pocket Thermometer with Laser Sight is among our most popular IR thermometers. It conveniently fits in a shirt pocket and boasts a 6:1 field of view. The laser guide helps you aim at the target with a reaction time much faster than thermistor based thermometers. Use it immediately after pulling from it from your pocket. A favorite among HVAC/R professionals with a range of -27°F to 482°F.

Panel Thermometer White Rectangular Solar Powered -58/158°F/°C: When temperature monitoring is essential and space is limited the SP160 is the ultimate panel thermometer. Not only does the compact size allow the SP160 to fit in most places that other panel thermometers cannot, it does not require any external power sources.

SPK1 Fieldpiece Pocketknife Style Thermometer - The SPK1 Pocket Knife Style Thermometer features a sharp tip for punching through flex duct and hangs easily from a vent or thermostat. Pull out the probe rod just like you would a pocketknife. 16 detent position grooves hold the rod at virtually at any angle. The probe rod folds away simply with no cover sleeve to lose. Temperature range: -58°F to 392°F. One of our most popular instruments for HVAC/R field service.

SPK3 Fieldpiece Rod and IR Temperature Pocket Tool - The SPK3 temperature pocket tool has convenient two-way temperatures with both a folding in-duct Rod temperature and an infrared 8:1 gun.  The IR takes quick surface temperature readings, and the Rod measures in the duct easily with a hanging hook for hands-free testing.  The SPK3 temperature tool also features max/min/hold functions, a backlight, and a display that flips depending on what temperature mode is chosen.  Plus, the SPK3 quickly calculates T1-T2, and it works across both the IR and Rod modes.

Designed for the HVAC Technician in mind. The SRH77A features include a backlight display for dark environments, sealed keypad which protects the instrument from spills and dust, and a battery eliminator jack. 3-Zone. Min/Max memory. The auto shut-off begins after 15 minutes of non-use or continuous ON mode. It features temperature differential between zones 1 and 2 , %RH and wet bulb. The Constant Scan feature records the min/max temperature from three probes allowing the technician to monitor critical temperatures remotely while completing other tasks. The SRH77A Includes: Model 1075 General Purpose Puncture Probe, Model 4011 Pipe Strap Probe, and Model 5028 Humidity Probe.

Autopro St25 Infrared Thermometer (-25:999F)

SWT2 Fieldpiece Water Resistant Thermometer - The SWT2 Water Resistant Thermometer has a fixed probe tip with a protective cover. Features a sealed body for field service and a sharp tip for punching through flex duct. The SWT2 has a temperature range of -58°F to 392°F and has a MAX/MIN function to check temperatures without having to keep an eye in the display. A pocket clip, ergonomic shape and easy to read LCD make measuring temperatures easier, better and faster. With a -58°F to 392°F temperature range and the Auto-Power Off function to conserve battery life, the SWT2 is a smart choice for HVAC/R field service.

Indoor/Outdoor Min/Max Thermometer 32/122°F/°C: The T158 oval panel thermometer measures two temperatures at once. It is wall or desk mountable. It is F/C selectable and features a 120" cord.

Provides a means of checking refrigerant temperature in the stream of gas. The most accurate method of testing gas temp is by sampling the liquid directly. For use with CPS TLVC and CPS TLVCS.

For those applications where only one temperature is read at a time, the TM99A is an industry standard. It features Min/Max memory, hold, auto shut-off. It is housed in a rugged polyethylene storage case with a sealed membrane and has a backlight for dark environments. The TM99A includes a carry case and 1075 general purpose probe. Thermistor Temperature Instr w/1075 Probe & Case -40/300°F/°C

TMAP CPS Analog Pocket Thermometer 1" (0 to 220°F)

Analog Pocket Thermometer (-10 to 100?C)

Digital pocket thermometer with stainless steel probe and pocket clip. Temperature Range: -58° to 302°F / -50° to 150°C User selectable