View CartMy Account / Order StatusHelp

Join our mailing list!



(Your shopping cart is empty)
You are here: Home > Century  
Sort By:
Page of 3
001-288-908 Plasma Torch Hand Grip (Trigger On Bottom)
001-288-908 Plasma Torch Hand Grip (Trigger On Bottom)
Price $45.38

001-288-908 Plasma Torch Hand Grip (Trigger On Bottom). Used on 50-55 Amp Models 118-014 (YA5550), 118-015 (2050), 118-016 (82050,5Z031A, 5Z031B)
002-244-908 Plasma Torch Safety Trigger. Used on 50-55 Amp Models 118-014 (YA5550), 118-015 (2050), 118-016 (82050,5Z031A, 5Z031B)
002-244-908 Plasma Torch Safety Trigger
Price $24.82

002-244-908 Plasma Torch Safety Trigger. Used on 50-55 Amp Models 118-014 (YA5550), 118-015 (2050), 118-016 (82050,5Z031A, 5Z031B)
068-013-666 Century Axle End Cap
068-013-666 Century Axle End Cap
Price $4.04

068-013-666 Century Axle End Cap
071-014-908 Century Drive Roller Key Set
071-014-908 Century Drive Roller Key Set
Price $8.37

Century Drive Roller Key Set. For use with Mig welders made by Century Mfg Co. Set includes both flat stock and woodruf keys for most welders, use when buying a new drive roller. Some older units had the key made into the drive roller, the new style drives rollers are slotted and require a woodruf key to lock them to the shaft.
098-142-000 Synthetic Lubricant 1/4oz 4424
098-142-000 Synthetic Lubricant 1/4oz 4424
Price $19.18

Synthetic Lubricant for plasma torch O-rings
117-035 160 - 225 Amp Wire Feed Welder Owners Manual
117-035 160 - 225 Amp Wire Feed Welder Owners Manual
Price $8.00

This Operators manual provides specific information for your welder model. This manual contains information such as the Important Safety Instructions, Usage and Maintenance of your welder. Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Model Coverage: 117-035, 117-037, 117-042, 2225, 83160, 83225
117-050 85 Amp 120 Volt Tote Wire Feed Welder Owners Manual
117-050 85 Amp 120 Volt Tote Wire Feed Welder Owners Manual
Price $8.00

This Operators manual provides specific information for your welder model. This manual contains information such as the Important Safety Instructions, Usage and Maintenance of your welder. Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Model Coverage: 117-050
117-051 110/90 Amp 120V With Spot Stitch Wire Feed Welder Owners Manual
117-051 110/90 Amp 120V With Spot Stitch Wire Feed Welder Owners Manual
Price $8.00

This Operators manual provides specific information for your welder model. This manual contains information such as the Important Safety Instructions, Usage and Maintenance of your welder. Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information.
Model Coverage: 117-051, 83110, 2150, WFWMDP
117-052 83105 Wire Feed Welder Owners Manual
117-052 83105 Wire Feed Welder Owners Manual
Price $8.00

This Operators manual provides specific information for your welder model. This manual contains information such as the Important Safety Instructions, Usage and Maintenance of your welder. Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Model Coverage: 117-052, 83105
117-053 2140 Century Wire Feed Welder Owners Manual
117-053 2140 Century Wire Feed Welder Owners Manual
Price $8.00

This Operators manual provides specific information for your welder model. This manual contains information such as the Important Safety Instructions, Usage and Maintenance of your welder. Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Model Coverage: 117-053, 2140
117-059 MATCO WFW140 Wire Feed Welder Owners Manual
117-059 MATCO WFW140 Wire Feed Welder Owners Manual
Price $8.00

This Operators manual provides specific information for your welder model. This manual contains information such as the Important Safety Instructions, Usage and Maintenance of your welder. Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Model Coverage: 117-059, WFW140
117-064 Wire Feed Welder Owners Manual
117-061 117-064 Wire Feed Welder Owners Manual
Price $8.00

This Operators manual provides specific information for your welder model. Convenient PDF download for permanent archiving. This manual contains information such as the Important Safety Instructions, Usage and Maintenance of your welder. Please read and save these instructions.Model Coverage: 117-064
117-067 Wire Feed Welder Owners Manual
117-067 Wire Feed Welder Owners Manual
Price $8.00

This Operators manual provides specific information for your welder model. This manual contains information such as the Important Safety Instructions, Usage and Maintenance of your welder. Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Model Coverage: 117-067
117-069 Wire Feed Welder Owners Manual
117-069 Wire Feed Welder Owners Manual
Price $8.00

This Operators manual provides specific information for your welder model. This manual contains information such as the Important Safety Instructions, Usage and Maintenance of your welder. Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Model Coverage: 117-069, 83145
117-00 Wire Feed Welder Owners Manual
117-070 Wire Feed Welder Owners Manual
Price $8.00

This Operators manual provides specific information for your welder model. This manual contains information such as the Important Safety Instructions, Usage and Maintenance of your welder. Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Model Coverage: 117-070
131-280-908 Century Torch Standoff Repl. 4416 / 44160
131-280-908 Century Torch Standoff Repl. 4416 / 44160
Price $53.85

Century / Solar Plasma Torch Stand-Off Kit keeps nozzle clear of dirt, paint and corrosion. Also simplifies cutting with straightedge or pattern. 131-280-908 TORCH STANDOFF Replaces 4416 / 44160.
131-315-666 Century Torch Head Kit 40 Amp / Includes-Head Trigger Handle
131-315-666 Century Torch Head Kit 40 Amp / Includes-Head Trigger Handle
Price $329.95

131-315-666 Torch Head Kit 40 Amp / Includes-Head Trigger Handle replaces part # 4409. For new style torch part # 860-992-100
141-214T Battery Charger Service Manual
141-214T Battery Charger Service Manual
Price $8.00

This Service manual provides information for your specific model. This manual contains parts breakdown, exploded view, color coded wiring diagram and component placement. Looking for parts? Click Here.
216-082-000 Fan Motor With Leads 240 Volt
216-082-000 Fan Motor With Leads 240 Volt
Price $42.95

216-082-000 Fan Motor With Leads 240 Volt Replaces 216-086-000, 216-086-010, 216-034-000, 216-034-100, 216-034-200, 216-034-666. See 316-007-300 for Fan blade.
216-086-666 Fan Motor W/ Leads 240 Volt
216-086-666 Fan Motor W/ Leads 240 Volt
Discontinued See 216-082-000

216-086-666 Fan Motor W/ Leads 240 Volt Replaces 216-034-000, 216-034-100, 216-034-200, 216-034-666
238-240-100 Plasma Torch 20 Amp 15 Foot Hose
238-240-100 Plasma Torch 20 Amp 15 Foot Hose
Discontinued

Century 238-240-100 Plasma Torch 20 Amp with 15 Foot Hose. OEM Torch Head hose assembly includes hose, torch head, o-ring, swirl ring, electrode, nozzle, nozzle cap.
238-240-999 Plasma Torch Head For 238-240-100
238-240-999 Plasma Torch Head For 238-240-100
Discontinued See 238-240-100 Torch

238-240-999 TORCH HEAD FOR 238-240-100, 20 Amp, Used on 15-22 Amp models 118-008 (YA2230), 118-009 (82020, PSC20, 3W722), 118-010 (2020), 118-011 (YA2120), 118-012 (2010), 118-013 (5Z135, 82015).
238-260-666 Century Positive Cable & Clamp Assembly 6ga 106"
238-260-666 Century Positive Cable & Clamp Assembly 6ga 106"
Price $25.50

238-260-666 Century Positive Cable & Clamp Assembly 6ga 106" for
Century Solar battery chargers. Universal Style for other chargers.
238-261-666 Century Negative Cable & Clamp Assembly 6ga 106"
238-261-666 Century Negative Cable & Clamp Assembly 6ga 106"
Price $25.50

238-261-666 Century Negative Cable & Clamp Assembly 6ga 106". Universal Style for other chargers.
238-285-999 Plasma Torch Head (Old Style Trigger On Top)
238-285-999 Plasma Torch Head (Old Style Trigger On Top)
Discontinued See 238-456-000

238-285-999 Plasma Torch Head (Old Style Trigger On Top) See 238-456-000 for new style with trigger on the bottom.
238-456-000 Plasma Torch 50 Amp 25 Foot With Safety Switch
238-456-000 Plasma Torch 50 Amp 25 Foot With Safety Switch
Discontinued

Plasma Torch 50 Amp 25 Foot With Safety Switch. OEM Torch Head hose assembly includes hose, torch head, o-ring, swirl ring, electrode, high current nozzle, nozzle cap. Replaces 238-285-000, 238-285-100.
238-456-999 Plasma Torch Head (New Style Trigger On Bottom)
238-456-999 Plasma Torch Head (New Style Trigger On Bottom)
Discontinued See 238-456-000

238-456-999 TORCH HEAD FOR 238-456-000, 50 Amp ,Replaces 238-285-000, 238-285-100. Used on 50-55 Amp Models 118-014 (YA5550), 118-015 (2050), 118-016 (82050,5Z031A, 5Z031B).
238-608-666 Retractable Jumper Cable Set 8 Ft #2
238-608-666 Retractable Jumper Cable Set 8 Ft #2
Price $194.57

238-608-666 Retractable Jumper Cable Set 8 FT #2
238-682-666 Use 238-695-666
238-682-666 Use 238-695-666
Discontinued See 238-695-666

238-682-666 Use 238-695-666
244-047-666 50 Amp Diode Replacement Kit (4)
244-047-666 50 Amp Diode Replacement Kit (4)
Price $17.44

244-047-666 50 Amp Diode Replacement Kit (4). Observe correct polarity when installing. Color ring denotes cathode end. Replace all diodes in the same orientation as original diodes.
244-076-666 Discontinued See 244-080-666 Century Rectifier Plasma YA2230
244-076-666 See 244-080-666 Century Rectifier Plasma YA2230
Discontinued See 244-080-666

Discontinued See 244-080-666 244-076-666 Century Rectifier Plasma YA2230
244-080-666 Century Rectifier Plasma
244-080-666 Century Rectifier Plasma
Price $236.48

244-080-666 244-076-666 Century Rectifier Plasma
245-105-666 Century 2 Ohm 420 Watt Resistor
245-105-666 Century 2 Ohm 420 Watt Resistor
Price $167.79

245-105-666 Century 2 Ohm 420 Watt Resistor comes with mounting brackets, insulators and mounting harware.
245-153-000 UV Bulb For UV Lamp - 50 Watt 12-Volt
245-153-000 UV Bulb For UV Lamp - 50 Watt 12-Volt
Price $28.95

245-153-000 UV Bulb For UV Lamp - 50 Watt 12-Volt
246-033-000 Century Circuit Breaker 135 Amp CLA-135
246-033-000 Century Circuit Breaker 135 Amp CLA-135
Discontinued See 246-211-666

246-033-000 Century Circuit Breaker 135 Amp CLA-135 Discontinued See 246-211-666
246-052-666 Rotary Selector Switch 2" Diameter 15 Amp 10 Position
246-052-666 Rotary Selector Switch 2" Diameter 15 Amp 10 Position
Price $48.50

Rotary Selector Switch 2" Diameter 15 Amp 10 Position
246-057-000 Rotary Selector Switch Discontinued See 246-058-666
246-057-000 Rotary Selector Switch See 246-058-666
Discontinued See 246-058-666

246-057-000 Rotary Selector Switch Discontinued See 246-058-666
246-057-200 Rotary Selector Switch Discontinued See 246-058-666
246-057-200 Rotary Selector Switch See 246-058-666
Discontinued See 246-058-666

246-057-200 Rotary Selector Switch Discontinued See 246-058-666
246-058-666 6 Position Rotary Selector Switch
246-058-666 6 Position Rotary Selector Switch
Price $25.95

6 Position Rotary Selector Switch with off. Replaces older 246-057-000, 246-057-100, 246-057-200 and 246-057-666 switches. This switch is a functional replacement switch but has some wiring changes. See product details.
DO NOT REMOVE THE WIRES FROM YOUR OLD SWITCH UNTIL THE NEW PART ARRIVES.
246-061-666 D.C. Ammeter Horizontal 0-12 Amp Range
246-061-666 D.C. Ammeter Horizontal 0-12 Amp Range
Discontinued

246-061-666 D.C. Ammeter Horizontal 0-12 Amp Range
246-063-000 Circuit Breaker 80 Amp CLA-80
246-063-000 Circuit Breaker 80 Amp CLA-80
Our Price: $28.80

246-063-000 Circuit Breaker 80 Amp CLA-80
246-086-000 Century Solenoid 24 Volt Air Service
246-086-000 Century Solenoid 24 Volt Air Service
Discontinued See 246-086-666

246-086-000 Century Solenoid 24 Volt Air Service
246-086-666 Century Solenoid 24 Volt Air Service, replaces 246-212-666 and 43700008.
246-086-666 Century Solenoid 24 Volt Air Service
Discontinued

246-086-666 Century Solenoid 24 Volt Air Service, replaces 246-212-666 and 43700008.
246-107-666 Knob 1 1/2" Round 1/4" Stem Diameter Black Plastic
246-107-666 Knob 1 1/2" Round 1/4" Stem Diameter Black Plastic
Price $8.41

246-107-666 KNOB 1 1/2" Round 1/4" Stem Diameter Black Plastic
246-120-666  Potentiometer 5k 1/4 watt
246-120-666 Potentiometer 5k 1/4 watt
Price $22.07

246-120-666  Potentiometer 5k 1/4 watt
246-165-666 Century Main Contactor 40 Amp
246-165-666 Century Main Contactor 40 Amp
Price $135.20

246-165-666 Century Main Contactor 40 Amp
246-166-666 Air Solenoid
246-166-666 Air Solenoid
Price $78.29

246-166-666 Air Solenoid
246-179-666 Pilot Arc Relay 120 Volt AC Coil
246-179-666 Pilot Arc Relay 120 Volt AC Coil
Price $72.54

246-179-666 Pilot Arc Relay 120 Volt AC Coil
246-199-666 Pilot Arc Relay 24 Volt DC Coil
246-199-666 Pilot Arc Relay 24 Volt DC Coil
Price $69.95

246-199-666 Pilot Arc Relay 24 Volt DC Coil
246-212-666 Century Solenoid 24 Volt Air Service
246-212-666 Century Solenoid 24 Volt Air Service
Discontinued See 246-086-666

246-212-666 Century Solenoid 24 Volt Air Service
246-213-666 Century Power Switch
246-213-666 Century Power Switch
Price $12.04

246-213-666 Century Power Switch
246-214-666 Switch 2 Position Rocker 16 Amp SPST
246-214-666 Switch 2 Position Rocker 16 Amp SPST
Price $20.64

SPST Switch 16 amp Rating Snap-in mount no tools required to install, 1/4 Spade terminals. Original OEM Part Every Time
246-219-666 Run Set-Up Switch 2 Position Rocker
246-219-666 See 246-176-666 Run Set-Up Switch 2 Position Rocker
Discontinued See 246-217-666

246-219-666 Discontinued See 246-176-666 Run Set-Up Switch 2 Position Rocker SPDT Switch 16 amp Rating Snap-in mount no tools required to install, 1/4 Spade terminals.
246-273-666 Universal Mechanical Timer 2 Hour With Knob
246-273-666 Universal Mechanical Timer 2 Hour With Knob
Price $31.20

120 Minute mechanical timer with knob. 120 minute total time two 1/4 spade terminal connections, no finish bell. Replaces older timer 246-337-000, 246-167-000, 246-167-666. Mounting on your timer may be different than the replacement, inspect your unit before purchase, some older units may have had electric timers which may require rewiring.
246-278-100 Century 12 Volt 20 Amp Circuit Breaker
246-278-100 Century 12 Volt 20 Amp Circuit Breaker
Price $7.15

246-278-100 Century 12 Volt 20 Amp Circuit Breaker
246-377-666 Switch Three Position DPTT (On-Off-On) 15 Amp Rating 1/4 Spade
246-377-666 Switch Three Position DPTT 15 Amp Rating 1/4 Spade
Price $32.00

Switch Three Position Double Pole Triple Throw (On-Off-On) 15 Amp Rating 1/4 Quick Connect Terminals.
246-457-666 2 Hour Mechanical Timer
246-457-666 2 Hour Mechanical Timer
Price $29.80

246-457-666 2 Hour Mechanical Timer. Mechanically controls charging in timed Mode. Single Pole Double Throw (SPDT) Switch rated 15 amperes. Termination is designed to accept 1/4" quick disconnect terminals.
247-016-666 Century Ammeter Horizontal 0-30 Amp Range 535711-207
247-016-666 Century Ammeter Horizontal 0-30 Amp Range 535711-207
Price $22.50

247-016-666 Century Ammeter Horizontal 0-30 Amp Range 535711-207. Also replaces 16369S Lester.
247-018-666 Ammeter Horizontal 0-15 Amp Range With Boost. Low High Boost Face.
247-018-666 Ammeter Horizontal 0-15 Amp Range With Boost
Price $24.75

247-018-666 Ammeter Horizontal 0-15 Amp Range With Boost. Low High Boost Face.
247-020-666 Century Ammeter Horizontal 0-60 Amp Range With Boost
247-020-666 Century Ammeter Horizontal 0-60 Amp Range With Boost
Price $29.50

247-020-666  Ammeter Horizontal 0-60 Amp Range With Boost
247-044-666 Century Ammeter Vertical 40 Amp
247-044-666 Century Ammeter Vertical 40 Amp
Price $27.90

247-044-666 Century Ammeter Vertical 40 Amp Snap In Mount, no tools needed to install.
247-046-000 Century Ammeter Horizontal 12 Amp
247-046-000 Century Ammeter Horizontal 12 Amp
Price $27.90

247-046-000 Century Ammeter Horizontal 12 Amp
247-058-666 Voltmeter Vertical 0-40 Volt
247-058-666 Voltmeter Vertical 0-40 Volt
Price $19.40

247-058-666 Voltmeter Vertical 0-40 Volt
247-059-666 Century Voltmeter Horizontal 0-40 Volt Range
247-059-666 Century Voltmeter Horizontal 0-40 Volt Range
Price $9.84

247-059-666 Century Voltmeter Horizontal 0-40 Volt Range
247-075-666 Ammeter Vertical 0-60 Amp Range
247-075-666 Ammeter Vertical 0-60 Amp Range
Discontinued

247-075-666 Ammeter Vertical 0-60 Amp Range
247-104-666 Century Ammeter Horizontal 0-60 Amp Range
247-104-666 Century Ammeter Horizontal 0-60 Amp Range
Price $24.80

247-104-666 Century Ammeter Horizontal 0-60 Amp Range
247-137-000 Century Ammeter 0-15 Amp (Bench Charger)
247-137-000 Century Ammeter 0-15 Amp (Bench Charger)
Price $16.50

S29420-27 Century Ammeter (Bench Charger). 0-15 Amp Range. 0-100% Charged. Green Red Face.
249-055-020 Heavy Duty Black Charging Clip Insulated 50 Amp
249-055-020 Heavy Duty Black Battery Charging Clip Insulated 50 Amp
Price $1.55

50 AMP Black Handle Battery Booster Clamp - Battery Clips are designed for use with battery chargers, tenders, memory minders, and other general 12 volt accessories. They are rated for 12 volt, 50 amp applications.  Handles have color identification for positive and negative. 3" Long, 1" Maximum Jaw Opening.
249-089-020 Heavy Duty Red Charging Clip Insulated 50 Amp
249-089-020 Heavy Duty Red Battery Charging Clip Insulated 50 Amp
Price $1.55

50 AMP Red Handle Battery Booster Clamp - Battery Clips are designed for use with battery chargers, tenders, memory minders, and other general 12 volt accessories. They are rated for 12 volt, 50 amp applications.  Handles have color identification for positive and negative. 3" Long, 1" Maximum Jaw Opening.
249-090-666 Heavy Duty Charging Clips Insulated 50 Amp (Pair)
249-090-666 Heavy Duty Battery Charging Clips Insulated 50 Amp (Pair)
Price $2.25

50 AMP Red/Black Handle Battery Booster Clamp (Pair) - Battery Clips are designed for use with battery chargers, tenders, memory minders, and other general 12 volt accessories. They are rated for 12 volt, 50 amp applications.  Handles have color identification for positive and negative. 3" Long, 1" Maximum Jaw Opening.
251195 Air Diffuser Plasma 50 Amp
251195 Air Diffuser Plasma 50 Amp
Price $12.48

251195 Air Diffuser Plasma 50 Amp
252-003-666 Century Switch, Air Pressure Service
252-003-666 Century Switch, Air Pressure Service
Price $90.90

252-003-666 Century Switch, Air Pressure Service
252-004-666 Century Switch, Air Pressure Service
252-004-666 Century Switch, Air Pressure Service
Price $84.03

252-004-666 Century Switch, Air Pressure Service
254-004-666 Century Heavy Duty Regulator
254-004-666 Century Heavy Duty Regulator
Price $106.01

254-004-666 Century Heavy Duty Regulator
254-005-666 Century Pre-Regulator (set at 105PSI)
254-005-666 Century Pre-Regulator (set at 105PSI)
Price $110.18

254-005-666 Century Pre-Regulator (set at 105PSI)
310-119-500 Century Steel Drive Roller .030 .035 .045 4341
310-119-500 Century Steel Drive Roller .030 .035 .045 4341
Price $29.72

310-119-500 Century Steel Drive Roller .030 .035 .045 4341. For use with steel welding wire in all Mig welders made by Century Mfg Co. Does Not Include key.
310-122-500 Century Steel Drive Roller .024 .030 .035 4323
310-122-500 Century Steel Drive Roller .024 .030 .035 4323
Price $23.70

Century Drive Roller .024 .030 .035 in Part number 4323. For use with steel welding wire in all Mig welders made by Century Mfg Co. Does Not Include key.
310-154-500 Century Steel Serrated Drive Roller .045 4347. For use with Mig welders made by Century Mfg Co.
310-154-500 Century Steel Serrated Drive Roller .045 4347
Discontinued See 310-119-500

310-154-500 Century Steel Serrated Drive Roller .045 4347. For use with Mig welders made by Century Mfg Co. Does Not Include "D" Or "Square" Stock Key.
312-067-666 Foot Molded
312-067-666 Foot Molded
Price $10.50

FOOT MOLDED
312-104-000 Plasma Torch Handle Assembly For 238-240-100
312-104-000 Plasma Torch Handle Assembly For 238-240-100
Price $53.83

Plasma Torch Handle Assembly, no hardware included. Molded handles only for 238-240-100
312-114-000 Handle Both Sides
312-114-000 Handle Both Sides
Price $45.05

Plasma Torch Handle Assembly, no hardware included. Molded handles only
312-246-000 Battery Charger Handle / Cable Wrap
312-246-000 Battery Charger Handle / Cable Wrap
Price $3.65

Battery Charger Handle / Cable Wrap for all Century Bench top Battery Chargers
334-174-666 Century Swan Neck
334-174-666 Century Swan Neck
Discontinued See 334-628-000

334-174-666 Century Swan Neck
334-263-908 Electrode Plasma 20 40 Amp 3 Pkg Repl. 4402 44020
334-263-908 Electrode Plasma 20 40 Amp 3 Pkg Repl. 4402 44020
Price $21.65 3 Pack

Century / Solar Style Electrode. Plasma Cutting Electrodes initiate the high intensity cutting arc and provide the contact necessary for arc maintenance. Electrodes are subject to wear, causing arc to weaken or be intermittent.
334-264-908 Swirl Ring Plasma 40 Amp Repl. 4403 44030
334-264-908 Swirl Ring Plasma 40 Amp Repl. 4403 44030
Price $18.95 Each

Century / Solar Style Plasma 40 Amp Swirl Ring. Swirl Ring imparts a swirling current to stabilize the arc. Keep your plasma cutter working at peak performance with these replacement parts.
334-265-908 Nozzle Plasma 40 Amp Straight Type 3pk Repl. 4401 44010
334-265-908 Nozzle Plasma 40 Amp Straight Type 3pk Repl. 4401 44010
Price $17.85 3 Pack

Century - Solar Style 40 Amp Plasma Cutting Nozzles. The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 40 amp)
334-266-908 Nozzle Cap Plasma Square Type 40 Amp Repl. 4404 44040
334-266-908 Nozzle Cap Plasma Square Type 40 Amp Repl. 4404 44040
Price $15.95 Each

Century / Solar Style Nozzle Cap, Square Type. Nozzle Caps direct cooling air flow to the nozzle and workpiece.
334-270-908 Nozzle Plasma 40 Amp Tapered Type 3pk Repl. 4411 44110
334-270-908 Nozzle Plasma 40 Amp Tapered Type 3pk Repl. 4411 44110
Price $23.45 3 Pack

Century - Solar Style 40 Amp Tapered Type Plasma Cutting Nozzles. The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 40 amp)
334-271-908 Nozzle Cap Plasma Tapered Type 40 Amp Repl. 4414 44140
334-271-908 Nozzle Cap Plasma Tapered Type 40 Amp Repl. 4414 44140
Price $22.85 Each

Century / Solar Style Nozzle Cap, Tapered Type. Nozzle Caps direct cooling air flow to the nozzle and workpiece.
334-274-100 Trigger Assembly Replaces 334-281-100
334-274-100 Trigger Assembly Replaces 334-281-100
Price $34.10

334-274-100 Trigger Assembly Replaces 334-281-100
334-276-100 Plasma Torch Handle Assembly
334-276-100 Plasma Torch Handle Assembly
Price $74.50

Plasma Torch Handle Assembly, no hardware included. Molded handles only
334-277-908 Electrode Plasma 15 20amp 5pkg Repl. 4420 44200
334-277-908 Electrode Plasma 15 20amp 5pkg Repl. 4420 44200
Price $21.65 5 Pack

Century / Solar Style Electrode. Plasma Cutting Electrodes initiate the high intensity cutting arc and provide the contact necessary for arc maintenance. Electrodes are subject to wear, causing arc to weaken or be intermittent.
334-277-908L Electrode Plasma Extended 15 20amp 5pkg
334-277-908L Electrode Plasma Extended 15 20amp 5pkg
Price $22.55 5 Pack

Century / Solar Style Electrode. Plasma Cutting Electrodes initiate the high intensity cutting arc and provide the contact necessary for arc maintenance. Electrodes are subject to wear, causing arc to weaken or be intermittent.
334-278-908 Swirl Ring Plasma 20 Amp Repl. 4422 44220
334-278-908 Swirl Ring Plasma 20 Amp Repl. 4422 44220
Price $24.45 Each

Century / Solar Style Plasma 40 Amp Swirl Ring. Swirl Ring imparts a swirling current to stabilize the arc. Keep your plasma cutter working at peak performance with these replacement parts.
334-279-908 Nozzle Plasma 15/20 Amp 5pk Repl. 4421 44210
334-279-908 Nozzle Plasma 15/20 Amp 5pk Repl. 4421 44210
Price $24.95 5 Pack

Century - Solar Style 15 / 20 Amp Plasma Cutting Nozzles. The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).
334-279-908L Nozzle Plasma Extended 15/20 Amp 5pk
334-279-908L Nozzle Plasma Extended 15/20 Amp 5pk
Price $28.40 5 Pack

Century - Solar Style 15 / 20 Amp Plasma Cutting Nozzles. The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).
334-280-908 Nozzle Cap Plasma 20 Amp Repl. 4423 44230
334-280-908 Nozzle Cap Plasma 20 Amp Repl. 4423 44230
Price $18.85 Each

Century / Solar Style Nozzle Cap, Tapered Type. Nozzle Caps direct cooling air flow to the nozzle and workpiece.
334-287-908 Electrode Plasma 50 Amp 3 Pack Repl. 4450 44500
334-287-908 Electrode Plasma 50 Amp 3 Pack Repl. 4450 44500
Price $21.85 3 Pack

Century / Solar Style Electrode. Plasma Cutting Electrodes initiate the high intensity cutting arc and provide the contact necessary for arc maintenance. Electrodes are subject to wear, causing arc to weaken or be intermittent.
334-287-908L Electrode Plasma Extended 50 Amp 3 Pack
334-287-908L Electrode Plasma Extended 50 Amp 3 Pack
Price $26.85 3 Pack

Century / Solar Style Electrode. Plasma Cutting Electrodes initiate the high intensity cutting arc and provide the contact necessary for arc maintenance. Electrodes are subject to wear, causing arc to weaken or be intermittent.
334-288-908 Swirl Ring Plasma 50 Amp Repl. 4452 44520
334-288-908 Swirl Ring Plasma 50 Amp Repl. 4452 44520
Price $23.85 Each

Century / Solar Style Plasma 50 Amp Swirl Ring. Swirl Ring imparts a swirling current to stabilize the arc. Keep your plasma cutter working at peak performance with these replacement parts.
   
 
Century Tool & Equipment
4013 S. Old Hwy 94
St. Peters MO 63304
 About Us
 Let Us Repair It
 Privacy Policy
 Send Us Feedback