This Knob is for selector switches on SE Series chargers only, there are separate knobs for selector switches and timers. Please check your part numbers carefully.

0099000066 Schumacher Battery Charger Axle 3/8 Dia.15-3/8" Long.

0099000080 Wheel 6" Plastic For 3/8 Axle

Mechanically controls charging in timed Mode with manual hold mode. Single Pole Single Throw (SPST) Switch rated 15 amperes. Termination is designed to accept 1/4" spade terminals.

0099000096 Knob For Timer Switches 1/4" OD 3/4 "D" Shaft, there are separate knobs for selector switches and timers. Please check your part numbers carefully.

This Knob is for selector switches with a 3/4 Shaft only, there are separate knobs for timers with a half shaft. Please check your part numbers carefully.

0499000051 Schumacher 6 Position Rotary Selector Switch With Knob (7 Terminals With Trace). Uses Newer "Twist Lock" Mounting System For newer units. If your unit has an older threaded shoulder with a Pal Nut, use the 0499000022 version of this switch.

1199003352 Schumacher Foot, Metal, no hardware included.

2100800011 Schumacher Pop Rivet 3/16" X 5/16" Long

Axle End Cap Fits .375 (3/8") Diameter Axle, Sold as a Pair, Can be used on any 3/8" Axle to secure wheels.

Battery Charger Wheels - Handle - Hardware Kit For SE3000, SE6030. Includes 3599000210 Handle, 0099000080 Wheels, 0099000123 Plastic Foot, 0099000066 Axle, 2299001076 Misc Parts Bag (screws etc..)

12volt DC Fan Speed Controller (Three Wire)

Fan Motor provides cooling for the unit. 80mm x 80mm x 25mm 12volt DC quite design keeps noise to a minimum. May require the purchase of a 2299001542 Schumacher 12volt DC Fan Speed Controller. Note plug end to determine correct fit. *Please note: You may have to swap plug ends from your old fan.

Heatsink Rectifier Assembly, requires no soldering to install. Includes 9" leads. Used on newer style units. Heavy Duty design for greater reliability. 1/4" spade terminal leads make installation a snap.

Heatsink Rectifier Assembly, requires no soldering to install. Includes 9" leads. Used on newer style units. Heavy Duty design for greater reliability. 1/4" spade terminal leads make installation a snap. *(fan speed control board sold separately)

12volt DC Fan Speed Controller (Two Wire New Style)

2299002762 Schumacher Fan Speed Control (Single Fan) For Rivit See 2100800011

3599000210 Schumacher Battery Charger Handle Round Black Steel For SF8050, SE-1555A, SE-2158, SE-3612, SE-4020, SE-4022, SE-5010A, SES-4022, SF-4022

3599000662 Schumacher Battery Charger Handle Round Black Steel. Replaces handle part number 3599000136.

3999000107 Schumacher Circuit Breaker 32 Volt DC 90 Amp. When ordering, it may be necessary to purchase a pair of the 5199000406 screws if replacing and older circuit breaker for retrofit.

Fan Motor provides cooling for the unit. 80mm x 80mm x 25mm 12volt DC Quiet design keeps noise to a minimum. May require the purchase of a 2299001542 Schumacher 12volt DC Fan Speed Controller. Note plug end to determine correct fit. *Please note: If replacing the 2299001565, you may have to swap plug ends from your old fan to make the new fan work. See 169116-001 for connectors

5100000005 Screw M3 X 5.5 For Original Timer

5199000406 Schumacher Screw 1/4-28 x 0.375 (Circuit Breaker Connection Screw)

6094K89 Knob For Battery Charger Selector Switches & Timers. This Knob is for selector switches and timers, designed with 1/4" ID and a set screw for locking onto shaft. Suitable for all 1/4" shaft switches. Replaces Schumacher 0099000045 & 0099000096.

TJ1-120MB Universal Mechanical 2 Hour Timer With Finish Bell. Mechanically controls charging in timed Mode, has "Hold" for manual un-timed charging. Single Pole Single Throw (SPST) Switch rated 15 amperes. Termination is designed to accept 1/4" Quick Disconnect terminals. Includes mounting screws. Replaces many older mechanical timers.