10237A Robinair Fits-All R-12 A/C Adapter Kit
These top quality adapters have been combined into a kit that's ideal for accessing R-12 vehicle A/C systems, as well as other types of systems. Five different adapters are included to fit most vehicles with R-12 systems & 1/4" fittings.
Price
Qty
Add
10751 Robinair Wheel For Cart Style Stations
Wheel For Cart Style Stations
Price
Qty
Add
115642 Robinair 12oz. Oil Drain - Oil Injector Bottle
12oz. Graduated Oil Drain - Oil Injector Bottle. 12oz Capacity in 1/2oz graduations and 360 Milliliters in 10 Milliliter graduations, for dispensing oil via an injector or for measuring oil removed during refrigerant recovery process.
Price
Qty
Add
13172 Robinair Filter Pump Oil Maintenance Kit With 34724 Filter
Keep recovery and recycling units operating at peak efficiency with a convenient maintenance kit. Contains one quick change filter-drier to be used on either R-12 or R-134a stations, and one 16 ounce bottle of our Premium High Vacuum Pump Oil. Designed for newer units manufactured after 1998.
Price
Qty
Add
13203 Robinair Premium High Vacuum Pump Oil Quart Bottle
Robinair’s "High Vacuum Pump Oil" is engineered to maintain maximum viscosity at high running temperatures and to improve cold weather starts. Discounts for case quantity purchases.
Price
Qty
Add
13204 Robinair Premium High Vacuum Pump Oil Gallon Bottle
Robinair’s "High Vacuum Pump Oil" is engineered to maintain maximum viscosity at high running temperatures and to improve cold weather starts. Laboratory tests prove that Robinair "High Vacuum Pump Oil" is more thermally stable in comparison to other leading brands
Price
Qty
Add
15369 Robinair Base & Foot Assembly For 15400 15600 15434 Series Vacuum Pumps
Base & Foot Assembly For 15400 / 15600 / 15434 Series Vacuum Pumps
Price
Qty
Add
15548 Robinair Pump Assembly Less Motor For 15600 Vacuum Pump
Forward Pumping section for 6 CFM Vacuum Pumps. Includes Pump, Iso Valve Installed, drain fitting and oil fill cap. For model 15600.
Price
Qty
Add
16301 Robinair Low Side Tank Adapter
Low Side Tank Adapter. 1/2" ACME Female X Lowside Spud used for tank fill and maintenance procedures.
Price
Qty
Add
17191 Robinair Flexible Spout For Vacuum Pump Oil
Robinair 17191 Flexible Oil spout, 10" long, handy for adding oil to a pump mounted on a station. Spout For Vacuum Pump Oil Fits 13203 Quart Bottle.
Price
Qty
Add
17506 Robinair 50lb. 1/4 Flare Refillable Refrigerant Tank
50lb. R-12 / Universal Gas Refillable Refrigerant Tank. Red Vapor Blue Liquid Ported Valve. 50 lb. capacity refrigerant tank for R-12, R-22, R-502 (universal) with 1/4" Flare fittings
Price
Qty
Add
17772 Robinair O-Ring 14mm 2 Pack
17772 Robinair 14mm O-Ring belongs on the machine thread end of a 134A hose nearest the coupler or on the seal between the two halves of a quick fitting.
Price
Qty
Add
18190A Robinair Lowside Service Coupler 134a
Lowside Service Coupler 134a. Field service couplers connect to our special Enviro-Guard hoses to allow access to service ports on automotive R-134a A/C systems.
Price
Qty
Add
18451 Robinair 1/4 45 Degree Quick Seal Repair Kit For Enviro-Guard Hoses
1/4" 45 Degree Quick Seal Repair Kit for Enviro-Guard Hoses rebuilds leaking or damaged Quick Seal Enviro-Guard Hoses. Kit includes complete instructions and installs in minutes.
Price
Qty
Add
19141 Robinair Oil Bottle For Oil Injector 8oz.
19141 Robinair Oil Bottle For Oil Injector 8oz.
Price
Qty
Add
19882 Robinair Oil Injector Cap And Fitting Kit
Replaces oil injector parts used on most machines with 8 oz. bottles and 5/16" diameter dip tubes. The fitting is a 1/8 MPT x 5/16" press in hose capture device that also holds the cap in place. The included cap has a hole for mounting and 2 weep holes for equalization.
Price
Qty
Add
34724 Robinair Recycling Filter Drier
The 34724 filter-drier has been specifically formulated using XH9 drier desiccant to trap acid and particulates and is formulated to remove water from the refrigerant. DO NOT accept look alike or knock off filters.
Price
Qty
Add
40083 Robinair Gaskets For 1/4 & ACME Charging Hoses (Pkg. Of 6)
These gaskets fit 1/4" flare and 1/2 ACME standard fittings. If you are doing maintenance on you unit it's a good idea to replace these as well as they become smashed over time resulting in poor flow.
Price
Qty
Add
40302 Robinair 1/2 ACME Quick Seal Repair Kit For Enviro-Guard Hoses
1/2" ACME Quick Seal Repair Kit for Enviro-Guard Hoses rebuilds leaking or damaged Quick Seal Enviro-Guard Hoses. Kit includes complete instructions and installs in minutes. The only tools required are pliers and snap-ring pliers.
Price
Qty
Add
68136A Robinair 36in. Yellow Enviro-Guard Hose 45 Degree Quick Seal Fitting
Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible. Meet all specifications for low permeation construction. 740 psi working pressure, 3700 psi burst pressure.
Price
Qty
Add
68236A Robinair 36in. Blue Enviro-Guard Hose 45 Degree Quick Seal Fitting
Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible. Meet all specifications for low permeation construction. 740 psi working pressure, 3700 psi burst pressure.
Price
Qty
Add
68296A Robinair 96in. Blue Enviro-Guard Hose 45 Degree Quick Seal Fitting
Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible. Meet all specifications for low permeation construction. 740 psi working pressure, 3700 psi burst pressure.
Price
Qty
Add
68336A Robinair 36in. Red Enviro-Guard Hose 45 Degree Quick Seal Fitting
Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible. Meet all specifications for low permeation construction. 740 psi working pressure, 3700 psi burst pressure.
Price
Qty
Add
68396A Robinair 96in. Red Enviro-Guard Hose 45 Degree Quick Seal Fitting
Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible. Meet all specifications for low permeation construction. 740 psi working pressure, 3700 psi burst pressure.
Price
Qty
Add
NB6501 PROMAX 1/4" Flare Cap & Strap
1/4 Flare Seal Cap with anchor retention strap prevents loss when not in use.
Price
Qty
Add
RA15425 Robinair 115v Station Mount Vacuum Pump
115v Station Mount Vacuum Pump. Designed for cart style Recovery Recycling Units. Ships as a generic with no handle, switch assembly. Includes exhaust cup, fittings, and mounting hardware.here .
Price
Qty
Add
RA17419 Robinair Oil Recovery Bottle DISCONTINUED See RO17419
OIL RECOVERY BOTTLE USE RO17419here .
Qty
Add
RA17459 Robinair 115 Volt System Relay
System Relay 115 volt coil, double pole single throw normally open switch with dual sets of 15 amp contacts. Acts as a pilot from the circuit board usually carrying higher amp loads to protect smaller relays on board. Can be used for universal applications due to the high amp contact rating.here .
Price
Qty
Add
RA18752 Robinair Vacuum Switch
Vacuum Switch Normally closed switch that opens at 13 +/- 3" Hg and resets at 3 +/- 3" Hg. If the vacuum in the inlet is deeper than 13" Hg, the switch opens and stops the recovery or recycling process. This switch must also open to bring the unit out of clearing.here .
Price
Qty
Add
RA19047 Robinair 115 Volt AC Outlet
115 Volt Grounded recepticle that acessories plug intohere .
Price
Qty
Add
RA19066 Robinair Sonalert 17700
Sonalert 17700 Sounds an audible tone when commands are programmed through the keypad.here .
Price
Qty
Add
RA19115 Robinair O-Ring Kit A/Q Fit- DISCONTINUED See 19150
O-RING KIT A/Q FIThere .
Qty
Add
RA19253 Robinair Decal Keypad
Decal Keypad User input device attached to a circuit board to select start, stop, and program functions of the unit. This applies to units manufactured before 03/98 with a faceplate overlay style keypad and some limited production dated 0498 and later.here .
Price
Qty
Add
RA19257 Robinair Lens - DISCONTINUED - SEE RO19257
Lens - Discontinued - See RO19257here .
Qty
Add
RA19258 Robinair Solenoid Rebuild Kit
Solenoid Rebuild Kit Normally closed Solenoid Rebuild Kit - Used to rebuild a solenoid.here .
Price
Qty
Add
RA19282 Robinair Micro Check Valve
Check Valve Allows flow in one direction only and prevents pressure from back flowing into a particular path.here .
Price
Qty
Add
RA19291 Robinair Oil Drain Ball Valve - DISCONTINUED SEE RO19295
Oil Drain Ball Valve - Discontinued - See RO19295 Manual user valve used for draining oil that was recovered from vehicle. Should be measured and new oil replenished before charging. NOTE: Oil must be drained after every recovery.here .
Qty
Add
RA19326 Robinair Check Valve & Spring (Large Face) Sold Each
Check Valve & Spring, This kit includes 1 check valve & spring. Allows flow in one direction only, towards the recovery solenoid, and prevents refrigerant from escaping out of the inlet after recovery and during recycling, evacuation and shutdown. See also the economy version of the same check here .here .
Price
Qty
Add
RA19343 Robinair Main Power Switch
Main Power Switch Controls the power between the power cord and the main board.here .
Price
Qty
Add
RA19392 Robinair Low Side Compound Gauge
Low Side Gauge Reads pressure and/or vacuum entering the low side hose. See Also RA19257 2?? Replacement Gauge Lenshere .
Price
Qty
Add
RA19393 Robinair High Side Pressure Gauge
High Side Gauge Reads pressure entering the high side hose. See Also RA19257 2?? Replacement Gauge Lenshere .
Price
Qty
Add
RA19427 Robinair High Pressure Switch
High Pressure Switch If pressure inside the unit exceeds 435psi, the switch opens, stopping all functions of unit. NOTE: Switch opens at 435psi +/- 10psi and resets at 320psi +/- 20psi.here .
Price
Qty
Add
RA19429 Robinair Vacuum Pump Protection Switch
Vacuum Pump Protection Switch Normally open switch closes at 25psi and reopens at 10psi. Prevents vacuum pump from starting when pressure exists in vehicle's system.here .
Price
Qty
Add
RA19430 Robinair Expansion Valve DISCONTINUED SEE RA19592
Expansion Valve Meters the flow of refrigerant into the system oil separator. The allowable tolerance of the valve is 35 + 5 psi.here .
Qty
Add
RA19432 Robinair Circuit Board
Circuit Board User interface for controlling refrigerant recovery, recycling, recharging, and other functions of the unit.here .
Price
Qty
Add
RA19458 Discontinued SEE RA19865 & INSTALL KIT Robinair 110v Compressor With O-Ring
110v Compressor With O-Ring Fittings - Discontinued - See RA19865 And Install Kit 1/3 hp hermetic piston type compressor, with o-ring fittings, used to move refrigerant. Converts the low pressure, low temperature entering gas into a high pressure, high temperature exiting gas.here .
Qty
Add
RA19469 Robinair Scale Assembly Single
Scale Assembly Single Sends a signal to the main board for accurate weight readings and tank overfill protection.here .
Price
Qty
Add
RA19478 Robinair Push Button Oil Injector Valve
Push Button Valve When depressed, allows oil to be injected into an A/C system that is in a vacuum.here .
Price
Qty
Add
RA19479 Robinair O-Ring For Bubble Flare Fittings (10 Pack)
The internal fittings used in the manifold block style machines use o-ring bubble fittings instead of flare fittings and require o-ring replacements to seal properly. (10 Pack)here .
Price
Qty
Add
RA19480 Robinair O-Ring Maintenance Kit
O-Ring Maintenance Kithere .
Price
Qty
Add
RA19483 Discontinued Robinair Keypad / Control Panel Decal
Keypad/Control Panel Decal Sends controlling signals to program the main board. 34700 17700 units with date code 0498 and later with no sight glass.here .
Qty
Add
RA19491 Robinair 115v Solenoid Coil
115v Solenoid Coil Coil only, used to energize a normally closed solenoid that, when energized, allows flow. i.e. Recovery, Charge, vacuum, etc. NOTE: RA19258 Solenoid Rebuild Kithere .
Price
Qty
Add
RA19501 Robinair Tank Strap Single
Tank Strap Single Used to keep the tank in place when positioning the unit.here .
Price
Qty
Add
RA19506 Robinair Panel Mount Manifold Valve Assembly
Panel mount manifold Valve Assembly. High and Low side Manual valves that control the flow of refrigerant into the unit. Valves measure 3.5" on center.here .
Price
Qty
Add
RA19628 Robinair Oil Injector Assembly
Oil Injector Assembly Push button style oil injector. Used to inject oil from bottle through panel valve, into vehicle.here .
Price
Qty
Add
RA19854 Robinair Compressor Install Kit 700 Units (Post 0498 Date Code)
Compressor Install Kit for 17700 & 34700 Block Style Units (Post 0498 Date Code) for RA19865 . Copper Lines and tubing used to retrofit unit for new style compressor includes o-rings.here .
Price
Qty
Add
RA19865 Robinair 115 Volt Cubigel Compressor
115 Volt Cubigel Compressor (Replaces The RA17110, RA17434, RA19458, & RA19748) Includes all hardware and electrical for a complete install. See additional plumbing retrofit kits noted for older style units.here .
Price
Qty
Add
RA19871 Robinair Check Valve Kit (Block Style)
Check Valve Kit (Block Style Units) Prevents incoming refrigerant from opening the charge solenoid and entering the liquid side of the ISV.here .
Price
Qty
Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
