Robinair Power Cord Strain Relief Protects the lifeline of your electric/electronic products by absorbing the forces of pull, push, and twist that may be exerted on the flexible power cord. Securely anchors, insulates, and protects cables at panel entry points.

Wheel For Cart Style Stations

110138 Robinair Tinnerman Clips Speednut Bracket - 90 Degree. (5 Pack) for Upper Gray Shroud For Cart Style Recovery Units.

110973 Robinair Operating Manual For 15400 15600 Vacuum Pump. This is the original factory manual shipped with your unit. Available as Hard Copy and a download PDF file when you check out. You will receive both.

112364 Robinair O-Ring For R-134a Quick Seal Fittings (Each). Fits the internal face of the quickseal fitting on 134A hoses for recovery equipment, gauge set hoses and tank fill hoses with 1/2" ACME fittings.

112699 Robinair Oil Injector O-Ring

114692 Robinair Oil Bottle Cap for Oil Inject / Drain bottle, for 8 - 12 ounce oil injector bottles. Durable plastic resists oils and dyes and most chemicals. Easily cleaned for long life. Don't forget extra bottles (115642) for storing different oil types.

114693 Robinair Oil Bottle Cap (Less Liner With Holes) For Oil Injectors

These gaskets fit 1/4" flare and 1/2 ACME standard hose fittings. If you are doing maintenance on you unit it's a good idea to replace these as well as they become crushed over time resulting in poor flow or restriction due to swelling. These are standard for some other vendors hoses as well.

12oz. Graduated Oil Drain - Oil Injector Bottle. 12oz Capacity in 1/2oz graduations and 360 Milliliters in 10 Milliliter graduations, for dispensing oil via an injector or for measuring oil removed during refrigerant recovery process. Durable plastic resists oils and dyes and most chemicals. Easily cleaned for long life. Don forget extra caps (114692) for storing different oil types.

12oz. Graduated Oil Injector Bottle. 12oz Capacity in 1/2oz graduations and 360 Milliliters in 10 Milliliter graduations. For storing alternative oils for injection & for dispensing oil via an injector or for measuring oil removed during refrigerant recovery process. Durable plastic resists oils and dyes and most chemicals. Easily cleaned for long life. Includes cap & Level O-ring.

Contains one quick change filter-drier to be used on both R-12 and R-134a stations, and one 16 ounce bottle of our Premium High Vacuum Pump Oil. For early models using 34430 Filter-Drier (17700A, 34700, 34300-2K). See your instruction manual if you have questions about which filter-drier to use.

Robinair’s "High Vacuum Pump Oil" is engineered to maintain maximum viscosity at high running temperatures and to improve cold weather starts. Laboratory tests prove that Robinair "High Vacuum Pump Oil" is more thermally stable in comparison to other leading brands, which means it resists breaking down due to heat for a longer period of time.

Robinair’s "High Vacuum Pump Oil" is engineered to maintain maximum viscosity at high running temperatures and to improve cold weather starts. Laboratory tests prove that Robinair "High Vacuum Pump Oil" is more thermally stable in comparison to other leading brands, which means it resists breaking down due to heat for a longer period of time. Robinair "High Vacuum Pump Oil" has a lower moisture content than other oils, thanks to our special packaging and handling procedures. Moisture degrades the oil’s purity, thinning it and reducing the pump’s ability to reach a deep vacuum.

Robinair Handle Power Cord Switch Assembly 15400 - 15600 Series Pumps. Kit includes Handle, Power Cord, Switch, butt connectors, screws for mounting and o-rings for the exhaust vent banjo bolt.

Forward Pumping section for 6 CFM Vacuum Pumps. Includes Pump, Iso Valve Installed, drain fitting and oil fill cap. For model 15600.

ROBINAIR 6 CFM 2 STAGE ROTARY VANE VACUUM PUMP Thoroughly evacuate todays tighter systems with their increased sensitivity to contaminants. Iso-Valve isolates pump from system, making it easy to measure rate of rise.

Parts Kit For Manifolds And Hoses Contains an assortment of the most commonly needed replacement parts for repairing manifolds, hoses and various other A/C tools.

8oz. Graduated Oil Drain - Oil Injector Bottle. 8oz Capacity in 1/2oz graduations and 240 Milliliters in 10 Milliliter graduations, for dispensing oil via an injector or for measuring oil removed during refrigernt recovery process.

17495 Robinair Vinyl Dust Cover For 17700, 34700, 12143A, 17534 Older Units

RO17641 Recycle Guard Hose Install Kit For R-12 and R-134A Installs. Comes Complete with hoses and fittings for Installation of a RO17622 RecycleGuard Filter.
Discontinued See the following part numbers
For R-134A Installation 1) RO19078 36" ACME Hose 1) MSC80296 1/8" MPT X 1/2" ACME Adapter
For R-12 / Other Gases 1) RO31036 36" Flare Hose 1) MSC90296 1/8" MPT X 1/4" Flare Adapter

17772 Robinair 14mm O-Ring belongs on the machine thread end of a 134A hose nearest the coupler or on the seal between the two halves of a quick fitting.

17773 Robinair O-Ring For R-134a Quick Seal Fittings (2 Pack). Fits the internal face of the quickseal fitting on 134A hoses for recovery equipment, gauge set hoses and tank fill hoses with 1/2" ACME fittings.

Lowside Service Coupler 134a. Field service couplers connect to our special Enviro-Guard hoses to allow access to service ports on automotive R-134a A/C systems.

Highside Service Coupler 134a. Field service couplers connect to our special Enviro-Guard hoses to allow access to service ports on automotive R-134a A/C systems.

18192 Robinair High/Low Side Service Couplers 134a. Field service couplers connect to our special Enviro-Guard hoses to allow access to service ports on automotive R-134a A/C systems.

19056 Robinair Heavy Duty Refrigerant Tank Strap With Buckle

19077 Robinair 36" Red Quick-Seal Enviro-Guard Tank Hose R134A. Enviro-Guard Hoses for Automotive R-134A. Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible.

19078 Robinair 36" Yellow 1/2" ACME Enviro-Guard Tank Hose R134A. Enviro-Guard Hoses for Automotive R-134A. Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible.

19079 Robinair 36" Blue Quick-Seal Enviro-Guard Tank Hose R134A. Enviro-Guard Hoses for Automotive R-134A. Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible.

19141 Robinair Oil Bottle For Oil Injector 8oz.

O-Ring Kit For 18190A & 18191A Couplers

Gauge Lens 2.75" Diameter For 17700a / 34600 / 34700 Series, old style gauges. Check the bevel of your lens to ensure it matches this lens profile. Newer style lenses have a sharp 45 degree angled outer ring these have a arched outer ring.

90º 1/8" female pipe thread ball valve kit replaces many older style valves with a universal panel mount valve and a complement of fittings to adapt to most retro fits on most equipment. The valve is an hermetically sealed "KANTLEAK" Style Valve for years of trouble free service and a collar lock ring for panel mounting if needed.

Red Cap For Asco Solenoid

19740 Source Tank Filter For 134A units. Protect your investment from debris and harmful elements from tank manufacturing processes. Metal debris can foul solenoids causing unnecessary repairs and equipment failures. Install this filter on the hose end of your tank add hose to protect your machine. 100 mesh screen is replaceable or cleanable. 1/2" Female ACME X 1/2" Male ACME fittings Installs inline of tank fill hose.

Robinair Oil Injector Cap (Steel) & the fitting is a 1/8 MPT x 5/16" press in hose capture device that also holds the cap in place. The included cap has a hole for mounting and 2 weep holes for equalization.. Replaces all earlier white plastic caps. For all "Side-Winder" Style Recovery Units.

Lower Gray Shroud For Cart Style Recovery Units. Replaces all other color shrouds.

Replaces oil injector parts used on most machines with 8 oz. bottles and 5/16" diameter dip tubes. The fitting is a 1/8 MPT x 5/16" press in hose capture device that also holds the cap in place. The included cap has a hole for mounting and 2 weep holes for equalization.

The Robinair 34430 filter-drier has been specifically formulated using XH9 drier desiccant to trap acid and particulates and is formulated to remove water from the refrigerant. You must regularly change the 34430 filter-drier to assure adequate moisture and contaminant removal.

50lb. R-134a Refillable Refrigerant Tank. Red Vapor Blue Liquid Ported Valve and a third port for vapor/air purge (a must for 3 hose recovery units). 50 lb. capacity refrigerant tank for R-134a with 1/2" ACME fittings. Fits models 12134, 34700, 17534, 17800 series

Robinair 34788 Combines Simple Operation With Superior Accuracy, Setting The Standard For SAE J2788 Standards For Accuracy And Speed. Robinair Is Ahead Of The Game With Fully automatic function lets you recover, vacuum, leak test, charge, and then walk away. Combines simple operation with superior accuracy. The Cool-Tech 34788 recovers, recycles, evacuates, leak tests, and recharges R-134a quickly and accurately. Automatic operation means less attention is needed! Features Include, Fully Automatic Function, Vacuum Leak Test, Automatic Refrigerant Refill, Automatic Air Purge, Automatic Oil Drain, Refrigerant Charging, Refrigerant Management System, Vacuum Function.

Robinair 34788 Combines Simple Operation With Superior Accuracy, Setting The Standard For SAE J2788 Standards For Accuracy And Speed. Robinair Is Ahead Of The Game With Fully automatic function lets you recover, vacuum, leak test, charge, and then walk away. Combines simple operation with superior accuracy. The Cool-Tech 34788 recovers, recycles, evacuates, leak tests, and recharges R-134a quickly and accurately. Automatic operation means less attention is needed! Features Include, Fully Automatic Function, Vacuum Leak Test, Automatic Refrigerant Refill, Automatic Air Purge, Automatic Oil Drain, Refrigerant Charging, Refrigerant Management System, Vacuum Function.

The Robinair 34988NI Premium A/C Machine combines ease of use and superior accuracy. It recovers, recycles, evacuates, leak tests and recharges R-134a vehicle systems quickly and accurately. The fully automatic function will recover, vacuum, leak test and charge on its own without the need to stand and monitor the machine. The product is fully SAE J2788 compliant and exceeds the requirements for charge accuracy and recovery efficiency. Robinair's patented automatic refrigerant refill feature maintains a user-selectable amount of refrigerant in the internal vessel and signals when it’s time to change supply tank, no monitoring required. The 34988NI will automatically add oil if necessary using load cells that measure the amount of oil removed from the system and automatically putting the right amount of A/C lubricant back into the system, make the 34988NI the only true fully automatic machine available today.

The Robinair 34998 Connected R-134A Machine recovers, recycles, evacuates, leak-tests and recharges R-134A with improved 98.5% efficiency – unmatched by any competitor. The new design features a large 10" capacitive touch LCD display, and automated features including automatic internal refrigerant refill, oil drain and refrigerant identification. The 3 also boasts full wireless capabilities for Wi-Fi or Bluetooth® communication, which enables automatic machine software updates and capacities database downloads. Use Google Cloud printing to print A/C service summary reports for customers or insurance companies. The Android operating system can also export service reports to store or share digitally.

These depressors fit behind and protrude through the hose gasket on 1/4" flare and 1/2 ACME standard fittings. If you are replacing hose gaskets it's a good idea to replace these as well.

These gaskets fit 1/4" flare and 1/2 ACME standard fittings. If you are doing maintenance on you unit it's a good idea to replace these as well as they become smashed over time resulting in poor flow.

Gaskets For 3/8" Charging Hose (Pkg. Of 6)

40302 1/2" ACME Quick Seal Repair Kit for Enviro-Guard Hoses rebuilds leaking or damaged Quick Seal Enviro-Guard Hoses. Kit includes complete instructions and installs in minutes. The only tools required are pliers and snap-ring pliers.

96" Low Side System Hose R134A. Enviro-Guard Hoses for Automotive R-134a. Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible.

96" Low Side System Hose R134A. Enviro-Guard Hoses for Automotive R-134a. Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible.

Blue 240" Enviro-Guard Hose for Automotive R-134A. Enviro-Guard Hoses for Automotive R-134a. Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible. Meet all specifications for low permeation construction. Clearly marked for R-134a. 740 psi working pressure, 3700 psi burst pressure.

Red 240" Enviro-Guard Hose for Automotive R-134A. Enviro-Guard Hoses for Automotive R-134a. Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible. Meet all specifications for low permeation construction. Clearly marked for R-134a. 740 psi working pressure, 3700 psi burst pressure.

96" High Side System Hose R134A. Enviro-Guard Hoses for Automotive R-134a. Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible.

Set of Red/Blue 20’ Enviro-Guard Hoses for Automotive R-134A. Enviro-Guard Hoses for Automotive R-134a. Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant.

The Robinair AC1234-9 Connected R-1234YF ACS Machine recovers, recycles, evacuates, leak-tests and recharges R-1234yf with improved 98.5% efficiency – unmatched by any competitor. The new design features a large 10" capacitive touch LCD display, and automated features including automatic internal refrigerant refill, oil drain and refrigerant identification. The AC1234-9 also boasts full wireless capabilities for Wi-Fi or Bluetooth® communication, which enables automatic machine software updates and capacities database downloads. Use Google Cloud printing to print A/C service summary reports for customers or insurance companies. The Android operating system can also export service reports to store or share digitally.

1/4 Flare Seal Cap with anchor retention strap prevents loss when not in use.

Recent production changes may affect your placement of this pump. The new pump was designed for 17800B cart style Recovery Recycling Units Only. For all other applications See 15548 For Replacement pumping section or RA19902 as a possible replacement.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Fan Used to keep the unit hermetic compressor and electrical components cool.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Expansion Valve & Tube Converts incoming liquid refrigerant into a low pressure saturated vapor. Expansion Valve Converts incoming liquid refrigerant into a low pressure saturated vapor. Outlet pressure regulator can be adjusted to 30-35 PSI outlet for proper flow. 1/4" Female pipe X 1/4" Male flare fittings.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

RA17434 Discontinued See 19865
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

System Relay 115 volt coil, double pole single throw normally open switch with dual sets of 15 amp contacts. Acts as a pilot from the circuit board usually carrying higher amp loads to protect smaller relays on board. Can be used for universal applications due to the high amp contact rating.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Moisture Indicator References the moisture content of the refrigerant being recycled. Pale yellow indicates wet and light mint green indicates dry. During recycling the moisture indicator is normally filled with liquid refrigerant and warm to the touch.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Vacuum Switch Normally closed switch that opens at 13 +/- 3" Hg and resets at 3 +/- 3" Hg. If the vacuum in the inlet is deeper than 13" Hg, the switch opens and stops the recovery or recycling process. This switch must also open to bring the unit out of clearing.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

RA18759 Robinair Air Purge Gauge And Thermometer gives the operator a visual cue as to the air content of a cylinder during recycling mode. Operates on a pressure temperature equivalence similar to a pressure temperature chart. The temp scale reads from the red needle and the pressure scale reads from the green needle. All that is needed is to compare the needles on the gauge to determine if air is present.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

System Oil Separator Separates oil from refrigerant. Internal heat causes incoming saturated vapor to evaporate. This is important to be sure no liquid enters the compressor and that oil droplets contained in the incoming refrigerant will drop out in the separator. This also works as a heat exchanger.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Complete Refrigerant Solenoid Assembly (120v) Includes brass body and coil. A normally closed solenoid that, when energized, allows flow. i.e. Recovery, Charge, vacuum, etc. NOTE: RA19258 Solenoid Rebuild Kit
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Scale Assembly Sends a signal to the main board for accurate weight readings during charging and recovery (strain gauge style).
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

This R-134a Oil Injector Assembly installs on pre '98 34700 style recovery recycling units. It allows for the storage 8 ounces of oil and dyes and attaches directly to the recovery unit via a bulkhead fitting included and is left permanently installed. Features full flow of refrigerant and will not impede charging or recovery.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Brass Panel Valve Allows flow from the low or high side hose into the center manifold tube (suction line strainer). RA19199 Manifold Stem Repair Kit for older valves.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

115 Volt Grounded recepticle that acessories plug into
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

PC Board Main Board - User interface for controlling refrigerant recovery, recycling, recharging, and other functions of the unit.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Robinair Keypad 17700 34700 (See RA19253 For New Style Keypad/Decal) - Sends controlling signals to program the main board.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Sonalert 17700 Sounds an audible tone when commands are programmed through the keypad.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Return Oil Separator Traps compressor oil that has migrated out with refrigerant while passing through the compressor. NOTE: Some units have an automatic oil return controlled through the main board. When the compressor runs continuously for 10 minutes, the main board drops power to the equalization solenoid for 3 seconds and then re-powers it.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

36" Low Side System Hose R134A. Enviro-Guard Hoses for Automotive R-134a. Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Hose 36" Yellow With Quickseal - Discontinued - See RO19078 Allows air pressure trapped at the top of the tank to enter the lower cavity of the air purge device during recycling.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

19079 Robinair 36" Blue Quick-Seal Enviro-Guard Tank Hose R134A. Enviro-Guard Hoses for Automotive R-134A. Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

High Pressure Cutout 17650 / 17655 A normally closed sensor that opens, stopping the recovery process when the compressor discharge pressure reaches 435 psi. SPDT Contact arrangement. 1/4 spade termination.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

134a High Side Gauge (Metric) Reads pressure entering the high side hose. NOTE: The gauge will read pressure in the high side hose with the high side valve closed.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

134a Low Side Gauge (Metric) Reads pressure and/or vacuum entering the low side hose. NOTE: The gauge will read pressure and/or vacuum in the low side hose with the low side valve closed.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Automatic Air Purge (Old Style) Used to purge excessive air from refrigerant tank during vacuum or recycle process. - FOR NEW STYLE SEE RA19242
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Solenoid Rebuild Kit Normally closed Solenoid Rebuild Kit - Used to rebuild certain solenoids in manifolds or discrete (RA19006) etc..
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

This R-134a Oil Injector Assembly Allows for the storage 8 ounces and injection of oils and dyes into the A/C system with out permitting air to enter into the system. It attaches directly to the inlet fitting of any recovery unit and can be left permanently installed.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Low Side Gauge Reads pressure and/or vacuum entering the low side hose. Panel mount & nuts included. 1/8" Female Pipe Thread connection. See RA19257 2-3/4" Replacement Gauge Lens
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

High Side Gauge Reads pressure entering the high side hose.Panel mount & nuts included. 1/8" Female Pipe Thread connection. See RA19257 2-3/4" Replacement Gauge Lens.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

The internal fittings used in the manifold block style machines use o-ring bubble fittings instead of flare fittings and require o-ring replacements to seal properly. (10 Pack)
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

115v Solenoid Coil Coil only, used to energize a normally closed solenoid that, when energized, allows flow. i.e. Recovery, Charge, vacuum, etc. NOTE: RA19258 Solenoid Rebuild Kit
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

RA19641 Robinair Power Cord 15'. 16 gauge SJTO (Black, White, Green) wire with male quick disconnect terminals.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Compressor Install Kit 700 & 400 Series Units To Use Cubigel Compressor
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

115 Volt Cubigel Compressor (Replaces The RA17110, RA17434, RA19458, & RA19748) Includes all hardware and electrical for a complete install. See additional plumbing retrofit kits noted for older style units.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Fastener Seal and hardware kit for Robinair recovery units is a service provider must have. This kit contains 38 of the most requested hardware and small maintenance items on most Robinair machines many of which are difficult or impossible to find by themselves, including gaskets seals, bolts and screws, pneumatic fittings, door latches, Torx screws, flare gaskets and other hard to find or specific related items. 3/8 Hose Gasket, 1/4 Fl Copper gasket, O'Rings, Screws Torx, Speed Nuts, Tinnerman U Clip, 1/2 Acme Jam nut, Pneumatic Fittings, Pan Head screws, Grommets, Door Latch Receptacle, Connector, Plastite connector, Bezel 7002K / 700Z, Door Latch Spring, Injector Bulkhead Fitting, Oil Injector Cap And Bulkhead Fitting, Vacuum Pump Fill Caps, Shreader Cores. Housed in a Double sided flip top case with extra space for other items.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Main Power Switch Controls the electrical power between the power cord and the main board.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.