 |
 |
 |
|
The Century Wire Feed 255 Flux-Cored/MIG Wire Feed Welder built for the professional. With twelve heat settings which allow you to weld from 20 ga. sheet metal up to 3/16” steel in a single pass. Welds 18ga. to 3/16" using Flux-Cored Wire in a single pass and to 5/16" in Multi Pass. Easily weld MIG with the addition of SUPERARC® L-56 wire. Unit includes 15’ MAGNUM® 250L gun and cable assembly with .035 contact tip, 10 Ft. Work cable and clamp, .045 Spare contact tip, MIG welding nozzle, Adjustable gas regulator and hose, Reel adapters for 2” and 3” wide 8” diameter spools, Accepts larger 33 lb. and 44 lb. spools of wire, Instruction manual, 10 Ft. Input cable with attached plug. Three-year warranty parts and labor, 90 days on gun and cable assembly. This unit is Spool Gun Ready. Built in thermal overload protection. Running gear with single cylinder rack integrated to base (maximum cylinder size 48”, 110 cm).
 Warning: This product may expose you to chemicals including lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Product Features
- Welds 18ga. to 3/16" using Flux-Cored Wire in a single pass and to 1/2" in Multi Pass
- Great tool for the professional builder
- Continuous wire speed control
- Sturdy wire feed design and multi-insulated transformer for reliable operation and long life
Rated Output:
-
230V:255 A/26.8 V @ 20% Duty Cycle
-
230V:150 A/21.5 V @ 60% Duty Cycle
-
230V:120 A/20.0 V @ 100% Duty Cycle
Includes:
-
15’ MAGNUM® 250L gun and cable assembly with .035 contact tip
-
10 Ft. Work cable and clamp
-
.045 Spare contact tip
-
MIG welding nozzle
-
Adjustable gas regulator and hose
-
Reel adapters for 2” and 3” wide 8” diameter spools
-
Accepts larger 33 lb. and 44 lb. spools of wire
-
Instruction manual
-
10 Ft. Input cable with attached plug
-
Three-year warranty parts and labor, 90 days on gun and cable assembly
-
Spool Gun Ready
-
Built in thermal overload protection
-
Running gear with single cylinder rack integrated to base (maximum cylinder size 48”, 110 cm)
Warranty:
- 3 year parts and labor warranty for unit
- 90 Day warranty on welding gun and cable
ACCESSORIES
Drive Roll Kits:
KP2855-1 For solid wire .025”-.030”
KP2856-1 For solid wire .035”
For flux-cored wire .045”
Diffuser KP52FN
Contact Tips
KP14-25 For solid wire .025”
KP14-30 For solid wire .030”
KP14-35 For solid wire .035”
KP14-45 For solid wire .045”
|
|
|
|
|
|
|