Phantoms. Gremlins. Glitches. Ghosts in the Machine. We all have names for them; those hard-to-find problems that seem to randomly appear, then disappear. The new inGEN® Diagnostic Data Recorder from Midtronics will help you locate and identify electrical system problems once and for all. After installation in your customer’s vehicle, it becomes a continuous diagnostic monitoring tool that captures and records all electrical system activity; even intermittent errors. You can then analyze the data and quickly locate, diagnose, and correct the problem; eliminating frustrating guesswork and customer returns.

Measurement Specifications

Current Consumption (approximate): FULL POWER MODE: 150 mA LOW POWER MODE: 20 mA (with auxiliary current disabled) DEEP SLEEP MODE: less than 5 mA Current Measurements: Main: -350 A to 350 A, 0 A to 7.5 A*, +/- 20 mA, 100 A to 350 A*, +/- 1 A Charge and discharge current Aux: -30 to 30 A max (fused), +/- 40 mA, connected in line with vehicle fuse Voltage Measurements: Main: 9 to 16 Vdc, +/- 20 mV Aux 1: On / off with settable threshold (triggerable) Aux 2: On / off with settable threshold Aux 3: On / off with settable threshold Aux 4: On / off with settable threshold Temperature Sensor: Located in DDR housing to approximate battery temperature. Measurement range: -4F to 158F (-20C to 70C) Operating Voltage: 7 to 16 Vdc

Physical Specifications Display: 2-line, 16-Character LCD Display Updates every 2 seconds with live data Length: 9 (22.86 cm) Width: 3.875 (9.84 cm) Height: 1.5 (3.81 cm) Weight: 1.6 lb (703 g) Operating Temperature: -4F to 158F -20C to 70C

Data Recording Specifications Full Power Mode: Data is sampled at 50 ms, updates to data card a 30 second average of 50 ms samples every 30 seconds. Low Power Mode: Data is recorded every 30 seconds. Check for current and voltage triggers every 1 second. Deep Sleep Mode: Data is recorded every 5 minutes. Check for current and voltage triggers every minute. Triggerable: In Full Power mode: Store 60 seconds of data centered on the trigger event at 50 ms intervals. In other modes: Store 60 seconds of data after the trigger event. Triggers are set in DAS PC software and loaded into DDR with data card prior to installation in vehicle. Triggerable Channels: Main Current Measurement Aux Voltage Channel 1