Provides a means of checking refrigerant temperature in the stream of gas. The most accurate method of testing gas temp is by sampling the liquid directly.

Thread Chaser For Use 18560 & 18561 Access Valve Core Remover / Installer. For use with No. 18560 or 18561, value core remover / installer. This thread chaser actually repairs damaged threads on valve cores in the service line, without releasing refrigerant into the atmosphere.

For use with No. 18560 or 18561, value core remover / installer. this extractor lets you remove damaged cores in the service line while the system is fully charged, without releasing refrigerant into the atmosphere.

Remove and install the valve core from a 1/4" male flare access fitting without the loss of refrigerant or in situations where Fast evacuation or charge is desired. Schrader core fittings only allow 1.2 CFM flow, removing the core dramatically improves the speed of vacuum and charging.

Remove and install the valve core from a 1/4" male flare access fitting without the loss of refrigerant. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a stem-type valve.

43150 Robinair –58° To 302° F In-Stream Superheat Thermometer / Valve Core Removal Tool Provides a means of checking refrigerant temperature in the stream of gas. The most accurate method of testing gas temp is by sampling the refrigerant directly. Connects directly to a standard 1/4" flare access fitting. Remove, test and install the valve core from a 1/4" male flare access fitting without the loss of refrigerant, fast accurate measurements ensure to the degree temperature measurements for superheat or subcooling. A must have tool for the serious refrigeration engineer.

Standard Valve Core Remover/Installer 1/4"

Valve Core Service Tool W/Access Port

91498 Mastercool Valve Core Remover & Installer For R410A. Newly designed with patented locking mechanism, the 91498 is the only valve core remover kit that has a safety nut allowing the technician to freely access the valve core without fighting high pressures. Packaged in a blow molded carrying case, this kit also offers ½”-20 UNF and ¼” flare fittings for all refrigerant applications. Now you can charge the system without a valve core. The system can be “QUICK CHARGED” after removal of the valve core. Using manifold gauge set with valve lever in CLOSED position, connect the correct charging hose to the valve (Fig. 2A or 2B). OPEN the valve and charge the system. After charging, CLOSE the valve and disconnect the hose. Proceed with valve core installation.

1/4'' valve core remover tool by JB (A32500N). Specifically designed to valve off the system to remove valve cores. Features a quarter turn ball valve shut-off fitting and o-ring seals the valve core can be completely removed and replaced without losing system charge. Speed up evacuation, recovery, or recharging time through the full flow port. Storage area houses spare valve cores. Made in the USA.

Replacement core remover bit for A32500N.

Replacement Core Remover for A32525N and A32504

5/16'' valve core remover by JB (A32505N). Specifically designed to valve off the system to remove valve cores. Features a quarter turn ball valve shut-off fitting and o-ring seals the valve core can be completely removed and replaced without losing system charge. Speed up evacuation, recovery, or recharging time through the full flow port. Storage area houses spare valve cores. Made in the USA.

1/4'' valve core remover with access port made in the USA. Specifically designed to valve off the system to remove valve cores, this core remover has the access port. Features a quarter turn ball valve shut-off fitting and o-ring seals the valve core can be completely removed and replaced without losing system charge.

5/16'' valve core remover with access port made in the USA. Specifically designed to valve off the system to remove valve cores, this core remover has the access port. Features a quarter turn ball valve shut-off fitting and o-ring seals the valve core can be completely removed and replaced without losing system charge.

A32535N JB Industries 5/16" Core Removal Tool

The CoreMax system eliminates process tubes and Schrader valves replacing them with a removable high flow valve. For units with process tubes and Schrader valves you may be able to reduce the cost of your refrigeration unit by replacing them with CoreMax. As a side benefit to eliminating process tubes, you may eliminate one or more brazed joints which are a potential leak path. This revolutionary method gives you the choice of how you want to test, fill and evacuate your systems. Sleeve actuated Design which allows removal and replacement of COREMAX valve core without loss of refrigerant in charged units.

CM-S250 JB Industries Core Max 1/4 Seat  - Tube/stub - 3 Pack

CM-S370 JB Industries Core Max 3/8 Seat  - Tube/stub - 3 Pack

CM-SNAP JB Industries SnapMate High Flow Service Quick Connector For CoreMax Valve Cores. The SnapMate service connectors are designed to provide quick connections to CoreMax Valve Cores as well as standard access valves. The Collets grip on the threads and are specifically designed for the Service Industry by providing quick and easy connections to all 7/16-20 (1/4" SAE 45º Flare) access valves.

CM-SS250 JB Industries Core Max 1/4 Seat/Saddle NIP - 3 Pack

CM-SS370 JB Industries Core Max 3/8 Seat/Saddle NIP - 3 Pack

CM-TRQ JB Industries Core Max Torque Wrench. The CoreMax Torque Wrench is used to properly install and torque the JB CoreMax valve into the CoreMax seat. The wrench is preset to 8 ft/lbs. of torque.

CM-VC003 JB Industries CoreMax High Flow Valve Core With Caps (3 Pack). The CoreMax system eliminates process tubes and Schrader valves replacing them with a removable high flow valve. For units with process tubes and Schrader valves you may be able to reduce the cost of your refrigeration unit by replacing them with CoreMax.  As a side benefit to eliminating process tubes, you may eliminate one or more brazed joints which are a potential leak path. This revolutionary method gives you the choice of how you want to test, fill and evacuate your systems. Sleeve actuated Design which allows removal and replacement of COREMAX valve core without loss of refrigerant in charged units.

CM-VC010 JB Industries CoreMax High Flow Valve Core With Caps (10 Pack). Imagine a System with No Process Tubes or Schrader Valves With no process tubes you have no online pinching and brazing improving quality and line throughput. The CoreMax system eliminates process tubes and Schrader valves replacing them with a removable high flow valve. For units with process tubes and Schrader valves you may be able to reduce the cost of your refrigeration unit by replacing them with CoreMax.

CM-VC025 JB Industries CoreMax High Flow Valve Core With Caps (25 Pack). Imagine a System with No Process Tubes or Schrader Valves With no process tubes you have no online pinching and brazing improving quality and line throughput. The CoreMax system eliminates process tubes and Schrader valves replacing them with a removable high flow valve. For units with process tubes and Schrader valves you may be able to reduce the cost of your refrigeration unit by replacing them with CoreMax.

CM-VC100 JB Industries Core Max Valve With Cap (100 Pack) Imagine a System with No Process Tubes or Schrader Valves With no process tubes you have no online pinching and brazing improving quality and line throughput. The CoreMax system eliminates process tubes and Schrader valves replacing them with a removable high flow valve. For units with process tubes and Schrader valves you may be able to reduce the cost of your refrigeration unit by replacing them with CoreMax.

Remove and install the valve core from a 1/4" SAE male flare access fitting without the loss of refrigerant. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a stem-type valve. Designed for durability and long life.

TLVCS410 CPS Mini-Split 5/16" Female x 5/16" Male Valve Core Removal Tool. Remove and install the valve core from 5/16" Fittings. 1/4" Male flare access fittings on the side and top. Remove cores without the loss of refrigerant or in situations where Fast evacuation or charge is desired. Schrader core fittings only allow 1.2 CFM flow, removing the core dramatically improves the speed of recovery, vacuum and charging. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a stem-type valve. Designed for durability and long life. (This tools has 5/16" Male flare access fittings on the top).

TLVC410A CPS Mini-Split 5/16" Female x 1/4" Male Valve Core Removal Tool. Remove and install the valve core from 5/16" Fittings. 1/4" Male flare access fittings on the side and top. Remove cores without the loss of refrigerant or in situations where Fast evacuation or charge is desired. Schrader core fittings only allow 1.2 CFM flow, removing the core dramatically improves the speed of recovery, vacuum and charging. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a stem-type valve. Designed for durability and long life. (This tools has 1/4" Male flare access fittings on the top).

Remove and install the valve core from a 1/4" SAE male flare access fitting without the loss of refrigerant or in situations where Fast evacuation or charge is desired. Schrader core fittings only allow 1.2 CFM flow, removing the core dramatically improves the speed of recovery, vacuum and charging. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a stem-type valve. Designed with a stainless steel ball and brazed side fitting for durability and long life. (This tool has 1/4 Flare fittings on all ports).

Remove and install the valve core from a 5/16" (1/2"-20) male UNF access fitting without the loss of refrigerant or in situations where Fast evacuation or charge is desired. Schrader core fittings only allow 1.2 CFM flow, removing the core dramatically improves the speed of recovery, vacuum and charging. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a stem-type valve. Designed for durability and long life. (All 3 fittings on this tool are 5/16")

Remove and install the valve core from 5/16" Fittings. 1/4" Male flare access fittings on the side and top. Remove cores without the loss of refrigerant or in situations where Fast evacuation or charge is desired. Schrader core fittings only allow 1.2 CFM flow, removing the core dramatically improves the speed of recovery, vacuum and charging. Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a stem-type valve. Designed for durability and long life. (This tools has 1/4" Male flare access fittings on the side and top).

Rebuild kit for TLVC4 / TLVCS

Rebuild kit for TLVC410 / TLVCS410

This core extractor lets you remove damaged cores in the service line while the system is fully charged without releasing refrigerant into the atmosphere. For use with CPS TLVC and CPS TLVCS.

Thread chaser for use with CPS TLVC and CPS TLVCS Access Valve Core Remover / Installer. This thread chaser actually repairs damaged threads on valve cores in the service line, without releasing refrigerant into the atmosphere.

Provides a means of checking refrigerant temperature in the stream of gas. The most accurate method of testing gas temp is by sampling the liquid directly. For use with CPS TLVC and CPS TLVCS.