These top quality adapters have been combined into a kit that's ideal for accessing R-12 vehicle A/C systems, as well as other types of systems. Five different adapters are included to fit most vehicles with R-12 systems & 1/4" fittings.

10250 Robinair Quick Coupler 1/4' MFL X 1/4" FFL 90.  Quick Seal fittings automatically shut off the charging hose when you disconnect it from the system, so any refrigerant left in the hose is not released. This also prevents “finger burn” and adds an extra measure of safety. Made of solid brass.

10292 Robinair Quick Seal Adapter 1/4" MFL x 1/4" FFL automatically shuts off the charging hose when you disconnect it from the system, so any refrigerant left in the hose is not released. This also prevents “finger burn” and adds an extra measure of safety. Made of solid brass.

10293 Robinair Flexible Adapter 1/4"MFL  x 1/8"FFL is great for hooking up A/C systems for evacuation and recharging.  Adapters fit most systems, and sizes are available to fit most passenger cars.  Features brass fittings and a durable neoprene-coated hose, 6" long.

The 10296 Robinair 3/16 Quick Seal Adapter automatically shuts off the charging hose when you disconnect it from the system, so any refrigerant left in the hose is not released. This also prevents “finger burn” and adds an extra measure of safety. Made of solid brass.

This connector is used to extend the length of R134a hoses by connecting them together. Can be used on red or blue hoses. Connect any number of hoses to get the extra length you need— there’s no need to order special hose lengths (for automotive R-134a). Hose Extension Coupler R134a 14mm Female X 1/2 ACME Male Hose Connector (Each).

Adapter 1/2" FFL To 1/4" MFL

3/16" FFL X 1/4" MFL Quick Coupler Adapter W/Long Depressor For Deep Set Cores. Fits '77 and later GM and '81 and later Ford

Quick Coupler 90° brass adapter 1/4" MFL x 3/16 "FFL. Fits '77 and later GM & '81 and later Ford

10778 Robinair 1/4 Adapter Hose is great for hooking up A/C systems for evacuation and recharging.  Adapters fit most systems, and sizes are available to fit most passenger cars.  Features brass fittings and a durable neoprene-coated hose, 6" long.

112364 Robinair O-Ring For R-134a Quick Seal Fittings (Each). Fits the internal face of the quickseal fitting on 134A hoses for recovery equipment, gauge set hoses and tank fill hoses with 1/2" ACME fittings.

Maximize your time and effort with our Multiport Recovery Inlet Manifold. Designed specifically for salvage operations and recycling centers, this manifold connects to the inlet of your recovery unit or manifold gauges and allows you to pull up to 11 appliances at a time. Constructed with full flow ports and no valve cores installed to restrict refrigerant flow (included if needed). The 1/4 flare ports are protected with brass seal caps. If you are using a manifold set on the inlet of your recovery unit put one of these on each red and blue hose and double your capacity. You can even daisy chain them together for additional capacity. (Don't forget extra hoses and piercing pliers when purchasing these).

Valve Assembly To Directly Connect A Thermistor Vacuum Gauge To A Vacuum Pump. Use with 15234 series of vacuum pumps. With a central valve, control provides real convenience.

Optional Vacuum Pump Intake Fitting Adapter. Brass Construction. 1/2" Female Flare x 3/8" Male Flare

Optional Vacuum Pump Intake Fitting Adapter. Brass Construction. 3/8" Female Flare x 1/4" Male Flare

13144 Robinair General Purpose Valve 1/4 MFL X 1/4 FPT Coupler Hand Wheel Shut-Off Valve. Brass valves have a male flare fitting on one end and 1/4" female pipe fitting on the other. Nylon seat with Teflon packing gives a quick, tight seal.

Two pack of 1/2-16 ACME o-ring seal caps with retainer straps.

13494 1/2-16 Acme O-Ring Seal Cap

Combination Inlet Tee For R-12 And R-134a For 15100 / 15200 Series Vacuum Pumps. Convert your pump to R-12 and R-134a. Solid brass “tee” replaces inlet fittings on pump; includes a branch with a ¼" MFL fitting for R-12 (and other refrigerants) and a branch with ½" Acme fitting for R-134a. Includes caps for both 1/4" Flare & 1/2" ACME Fittings.

Inlet Tee 1/4" Male Flare X 1/2" Male Flare. Includes Caps.

15495 Robinair Combination Inlet Tee For R-12 And R-134a For 15400 15600 Series Vacuum Pumps. Convert your pump to R-12 and R-134a. Solid brass “tee” replaces inlet fittings on pump; includes a branch with a ¼" MFL fitting for R-12 (and other refrigerants) and a branch with ½" Acme fitting for R-134a.

Convert your pump to R-12 and R-134a. Solid brass inlet "tees" replace inlet fittings on pump. Includes a branch with a 1/4" Male Flare fitting for R-12 (and other refrigerants) and a branch with 1/2" Acme fitting for R-134a for automotive use.

Low Side Tank Adapter. 1/2" ACME Female X Lowside Spud used for tank fill and maintenance procedures. 1/2" ACME Female x Low-Side R-134a Coupler

17773 Robinair O-Ring For R-134a Quick Seal Fittings (2 Pack). Fits the internal face of the quickseal fitting on 134A hoses for recovery equipment, gauge set hoses and tank fill hoses with 1/2" ACME fittings.

Lowside Service Coupler 1234yf. Field service couplers connect to our special Enviro-Guard hoses to allow access to service ports on automotive R-1234yf A/C systems.

Highside Service Coupler 1234yf. Field service couplers connect to our special Enviro-Guard hoses to allow access to service ports on automotive R-1234yf A/C systems.

18124 Robinair High - Low Side Service Coupler Set 1234yf. Field service couplers connect to our special Enviro-Guard hoses to allow access to service ports on automotive R-1234yf A/C systems.

This straight adapter is designed specifically for General Motors vehicles with R-12 air conditioning systems featuring “Positive Seal” high-side charge valves. The adapter is made of brass with an easy-to-grip coupler nut, 1/4" MFL x 3/16" FFL.

Lowside Service Coupler 134a. Field service couplers connect to our special Enviro-Guard hoses to allow access to service ports on automotive R-134a A/C systems.

Highside Service Coupler 134a. Field service couplers connect to our special Enviro-Guard hoses to allow access to service ports on automotive R-134a A/C systems.

18192 Robinair High/Low Side Service Couplers 134a. Field service couplers connect to our special Enviro-Guard hoses to allow access to service ports on automotive R-134a A/C systems.

18319 Robinair Adapter 1/4 Female Flare X 1/2 ACME

The 18341 R134A Automatic Service Coupler Set features a unique automatic design which open automatically upon connection to the service port, you no longer are required to screw open or closed the valve actuator on the coupler to access the system.

These six inch adapters connect to any 1/4" charging hose for convenient in-line control of refrigerant flow. The ball valve opens and closes in just a quarter turn. The fitting features a 45° bend for easier connections, even in tight spots.

These six inch adapters connect to any 1/4" charging hose for convenient in-line control of refrigerant flow. The ball valve opens and closes in just a quarter turn. The fitting features a 45° bend for easier connections, even in tight spots. Set of three, Red Yelow Blue.

Valve controls refrigerant flow from access fitting. Access valve closes Schrader before disconnecting the valve preventing frost burns. Back seat valve feature to retain gas in hose when disconnecting. 1/4" Female flare. x 1/4" Male flare. 500 psi working pressure. Made in the USA

Easily convert your 1/4" Flare manifold hose set to 134A Automotive with these adapters.

1/2 Acme Male X 1/4 Flare Swivel With Depressor

19162 Ritchie Yellow Jacket 1/2 Acme Male X 1/4 Female Solid Adapter

19163 1/2 Female Acme x 1/4 Male Flare Adapter. SealRight fittings automatically and immediately trap refrigerant in the hose when disconnected, helping meet nonventing regulations and preventing finger burns. One-piece attaches quickly, saving up to 50 percent in time compared to 2-piece quick couplers. Works with or without Schrader core. Gaskets resist deterioration from CFC, HCFC, HFC refrigerants and refrigerant oils.

19165 Ritchie Yellow Jacket 1/2" Acme Female Quick Coupler X 1/4" Male Flare Adapter

19173 Ritchie R410a Adapter 5/16" Female Quick Coupler x 1/4" Male flare

19174 Ritchie R410a Adapter 1/4" Female Quick Coupler x 5/16" Male Flare

19175 Ritchie R410a Adapter 5/16" Female Quick Coupler x 5/16" Male Flare

Low Side Coupler For Ac 375

High Side Coupler For Ac 375

33112N JB Industries 1/4" Female Flare Quick Coupler x 1/4" Male Flare Auto Shut-Off Coupler. Use this quick coupler with existing charging hose. Immediately traps refrigerant discharge from hose when disconnecting from access fitting.

33112RK JB Industries 1/4 Flare Secure Seal Rebuild Kit 33112N and 33113N

33113N JB Industries 1/4" Female Flare Quick Coupler x 1/4" Male Flare Auto Shut-Off Coupler-90°. Use this quick coupler with existing charging hose. Immediately traps refrigerant discharge from hose when disconnecting from access fitting.

33115N JB Industries 5/16" Female Flare Quick Coupler x 1/4" Male Flare Auto Shut-Off Coupler. Use this quick coupler with existing charging hose. Immediately traps refrigerant discharge from hose when disconnecting from access fitting.

33116N JB Industries 5/16" Female Flare Quick Coupler x 1/4" Male Flare Auto Shut-Off Coupler 90°. Use this quick coupler with existing charging hose. Immediately traps refrigerant discharge from hose when disconnecting from access fitting.

ACME Tee Fitting 1/8" Mpt X 1/8" Mpt X 1/2" ACME To Install Both 34065 And 14830a On 34100 Smart Cart

1/4" MFL X 1/4" MFL Hose Extension Coupler Without Valve Core

40380 Robinair 1/4 MFL X 1/4 FFL Coupler Hand Wheel Shut-Off Valve

Straight Shut-Off Valve 1/4" MFL X 1/4" MFL

40479 Robinair Gauge Cock Brass Tee Handle 1/4 FPT X 1/4 MPT

40553 Robinair Gauge Quick Coupler Valve Core Depressor 1/8 FPT X 1/4 FFL

Straight Access Adapter 1/4" FFL X 1/4" MFL. 1/4" MFL x 1/4" FFL Fits '76 and earlier GM and Fits '76 and earlier Ford. Solid brass fitting.

40563A 90° brass adapter 1/4" MFL x 1/4" FFL Fits '76 and earlier GM & '76 and earlier Ford

Never Lose that fitting cap on your recovery unit or tank again. Premium 1/4 Brass Cap With 3" Capture Chain. Extra long skirting allow for a deep gasket, shallow "o-ring" type caps can actually depress cores causing leaks when over tightened. The gaskets in these are also replaceable, See 40083 for replacements.

QUICK SEAL Caps,1/4" Sae Flare (Pkg. Of 6). Extra long skirting allow for a deep gasket, shallow "o-ring" type caps can actually depress cores causing leaks when over tightened. The gaskets in these are also replaceable, See 40083 for replacements.

QUICK SEAL Caps,1/4" Sae Flare (Pkg. Of 6). Extra long skirting allow for a deep gasket, shallow "o-ring" type caps can actually depress cores causing leaks when over tightened. The gaskets in these are also replaceable, See 40083 for replacements. Features a core tool on the cap for convenience.

QUICK SEAL Caps,1/4" Sae Flare (Pkg. Of 25). Extra long skirting allow for a deep gasket, shallow "o-ring" type caps can actually depress cores causing leaks when over tightened. The gaskets in these are also replaceable, See 40083 for replacements. Features a core tool on the cap for convenience.

1/2" Flare Cap

Remove valve cores without losing the system charge. Designed specifically for use during evacuation or recharging of any system with valve core-type access ports. Makes replacing leaking valve core under charge a snap. Never recover a system to replace a core again. A huge time saver. This tool pays for it self the first time you use it. The tool removes standard R-12 cores as well as most R-134a cores on both Low & High Side Ports. Heavy brass construction with a fine chrome finish prevents corrosion and keeps the tool looking nice as well as easy to clean.

6029 FJC Inc. R134a Self-Sealing Can Tap (Each). For Use with new Self-Sealing Cans.

R12 Side Can Tap: This can tap slides over R12 cans for quick and easy charging.

R134a Side Can Tap: This can tap slides over R134a cans for quick and easy charging.

R134a U-Charge Hose w/Coupler & Gauge: This is used while adding R134a refrigerant or additives to a vehicle's A/C system, with a gauge to monitor the low side pressure to aid you in getting a correct charge. For Use with old Puncture-Style Cans.

Replacement Seal for Side Can Tap: This replacement seal is for R12 and R134 Side Can Taps - FJC Part #s 6031, 6034 and 6040.

R134a/R12 Side Can Tap: This tap can be used with all R134a or R12 small cans of refrigerant or oil charge.

Replacement Seal for Can Tap for Part # 6030: This is the replacement seal for FJC Part #s 6030 - R134a Can Tap and 6035 - R134a U-Charge Hose.

6801 R1234YF High Side Manual Coupler with M12 Fitting

6802 R1234YF Low Side Manual Coupler with M12 Fitting

Maximize your time and effort with our Multiport Recovery Inlet Manifold. Designed specifically for salvage operations and recycling centers, this manifold connects to the inlet of your recovery unit or manifold gauges and allows you to pull up to 6 appliances at a time. Constructed with full flow ports and no valve cores installed to restrict refrigerant flow (included if needed). The 1/4 flare ports are protected with brass seal caps. If you are using a manifold set on the inlet of your recovery unit put one of these on each red and blue hose and double your capacity. You can even daisy chain them together for additional capacity. (Don't forget extra hoses and piercing pliers when purchasing these).

High Side E-Z Snap R134A 14mm-F X 16mm Quick Coupler

Low Side E-Z Snap R134A 14mm-F X 13mm Quick Coupler

1/2" Acme-F X 13mm (Low Side)

Low Side 1/4" X 13mm Straight Adapter (10 Pieces)

82634 Mastercool 1/4" Female Flare X 1/2" Acme Male Adapter

82634-M Mastercool 1/4" Female Flare X 1/2" Acme Male Adapter Without Shrader Core

82635 Mastercool 1/2" Acme Female X 1/4 Male Flare R134A Adapter

Mastercool 82834 High-Side Manual R134a 14mm-F x 16mm Quick Couplers (Red) are patented manual couplers adjust easily to R134a service ports with varying dimensions. All metal construction for extra durability. Patented, spring loaded depressor will not damage service valves. Can be removed from service ports regardless of knob position without losing refrigerant. Meets SAE, UL and EPA requirements for containment of refrigerant. Color coded. Patent# 5,370,359

82834-SL-E Mastercool High Side Manual R134a Safety Lock Coupler 1/4" Flare Male by 16mm - Patented manual couplers adjust easily to R134a service ports with varying dimensions. All metal construction for extra durability. Patented, spring loaded depressor will not damage service valves. Can be removed from service ports regardless of knob position without losing refrigerant. Meets SAE, UL and EPA requirements for containment of refrigerant. Color coded.

The Mastercool 82934 Low-Side Manual R134a 14mm-F x 13mm Quick Coupler (Blue) are patented manual couplers adjust easily to R134a service ports with varying dimensions. All metal construction for extra durability. Patented, spring loaded depressor will not damage service valves. Can be removed from service ports regardless of knob position without losing refrigerant. Meets SAE, UL and EPA requirements for containment of refrigerant. Color coded. Patent# 5,370,359

82934-SL-E Mastercool Low Side Manual R134a Safety Lock Coupler 1/4" Flare Male by 16mm - Patented manual couplers adjust easily to R134a service ports with varying dimensions. All metal construction for extra durability. Patented, spring loaded depressor will not damage service valves. Can be removed from service ports regardless of knob position without losing refrigerant. Meets SAE, UL and EPA requirements for containment of refrigerant. Color coded.

83634-M Mastercool 1/4" Female Flare X 1/2" Acme Left Hand Thread Male Fitting 1234YF

Manual High Side Coupler For R1234Yf

Manual Low Side Coupler For R1234Yf

Mastercool 90262-R 45° Manual Shut-Off Valve Set (Set of 3 - Blue, Red, Yellow) (1/4" SAE). Ball valve design with flexible hose controls refrigerant with a quarter turn of the valve handle. Meets SAE, EPA and UL requirements for containment of refrigerant. Can be operated with one hand. Screws onto charging hose end. Mastercool manufactures a complete line of shut-off valves for containment of refrigerant. EPA requires shut-off valves within 12 inches of the charging hose ends to prevent unnecessary venting of refrigerant. Using shut-off valves is much safer than allowing refrigerant to blow out during service.

1/4" X 1/4" 90Deg Adapter W/Valve Core

1/4" Male Flare X 3/16" Female Flare 90 Adapter

1/4" Male Flare X 3/16" Female Flare Flex Adapter

90637 Mastercool 3/4" Female Pipe Thread X 1/4" Male Flare Refrigerant Tank Adapter

A31656 JB Industries ¼” Sae Male X 5/16” Sae Female Adapter

A31665 JB Industries 5/16” Sae Male X ¼” Sae Female Adapter

ABB Fitting 1/4'' SAE M to F. Advanced automatic sealing valve eliminates refrigerant loss and blowback. Add to existing hose to eliminate refrigerant loss and comply with EPA regulations

ABB Fitting 1/2'' ACME M to F. Advanced automatic sealing valve eliminates refrigerant loss and blowback. Add to existing hose to eliminate refrigerant loss and comply with EPA regulations.

3-Pack of ABB Fittings 1/4'' SAE M to F. Advanced automatic sealing valve eliminates refrigerant loss and blowback. Add to existing hose to eliminate refrigerant loss and comply with EPA regulations.

ABB Fitting 1/2''-20 UNF M to F. Advanced automatic sealing valve eliminates refrigerant loss and blowback. Add to existing hose to eliminate refrigerant loss and comply with EPA regulations

3-Pack of ABB Fittings 1/2"-20 UNF M to F. Advanced automatic sealing valve eliminates refrigerant loss and blowback. Add to existing hose to eliminate refrigerant loss and comply with EPA regulations

ABB Fitting 1/2"-20 UNF F to 1/4" SAE M 90°. Advanced automatic sealing valve eliminates refrigerant loss and blowback. Add to existing hose to eliminate refrigerant loss and comply with EPA regulations

ABB Fitting 1/2"-20 UNF F to 1/4" SAE M. Advanced automatic sealing valve eliminates refrigerant loss and blowback. Add to existing hose to eliminate refrigerant loss and comply with EPA regulations.

ABB Fitting 1/4" SAE M x 1/4" SAE F 45°. Advanced automatic sealing valve eliminates refrigerant loss and blowback. Add to existing hose to eliminate refrigerant loss and comply with EPA regulations

ABB Fitting 1/4" SAE M to F 90°. Advanced automatic sealing valve eliminates refrigerant loss and blowback. Add to existing hose to eliminate refrigerant loss and comply with EPA regulations

AB903 CPS 1/4" SAE Male x 1/4" SAE Female 90° Anti Blow Back Hose End Fitting (3-Pk). Advanced automatic sealing valve eliminates refrigerant loss and blowback. Add to existing hose to eliminate refrigerant loss and comply with EPA regulations

ABB Fitting 1/4" SAE F to 1/8" FPT. Advanced automatic sealing valve eliminates refrigerant loss and blowback. Add to existing hose to eliminate refrigerant loss and comply with EPA regulations

AD12 CPS 1/2" ACME Female x Low-Side R-134a Adapter. For R-134a automotive tanks / tank fill procedure.

AD14 CPS 14mm Male x 1/4" Male Flare Coupler Adapter. Used to adapt 14mm 134A service couplers to 1/4" flare for universal use.

AD149C 1/4" Male Flare x 1/4" Female Flare 90º Swivel Access Adapter. Female side features knurled fitting with a valve core depressor. Great for getting into tight spaces where a regular refrigerant hose wont reach.

AD18C CPS 1/4" Male Flare x 1/8" Female With Valve Core Adapter. For use with manifolds and compressors.

AD24 CPS 1/4" Male Flare x 1/8" Male Pipe With Cap & Core Access Fitting (6 Pack). For use with manifolds and compressors.

AD24B CPS 1/4" Male Flare x 1/8" Male Pipe With Cap & Core Access Fitting (100 Pack). For use with manifolds and compressors.

AD36 CPS 3/16" SAE Female x 1/4" Male Flare Adapter. TLVC Valve Core Tool for R-12 HI-side.

AD44 CPS 1/4" Male Flare With Cap & Core x 1/4" Male Pipe Access Fitting (6 Pack). For use with vacuum pumps and compressors.

AD44B CPS 1/4" Male Flare With Cap & Core x 1/4" Male Pipe Access Fitting (100 Pack). 1/4" SAE M x 1/4" MNPT. For use with vacuum pumps and compressors.

AD47 CPS 1/4" Male Flare x 1/4" Male Flare Union

AD47B CPS 1/4" Male Flare x 1/4" Male Flare Union (100 Pack)

AD48 CPS 1/2" ACME Male x 1/4" Female Flare Adapter (3 Pack). For use with vacuum pumps, manifolds, and recovery tanks.

AD48B CPS 1/2" ACME Male x 1/4" Female Flare Adapter (50 Pack). For use with vacuum pumps, manifolds, and recovery tanks.

AD61 CPS Tank Adapter 3/4"-14 Female Pipe X 3/8" Male Flare Drum Adapter. For large 125 lb. cylinders

AD64 CPS 3/8" SAE M X 1/4"SAE Female Adapter

AD68 CPS 3/8" Male Flare X 1/2" Female ACME Adapter (3 Pack) For use with vacuum pumps.

AD68V CPS 3/8" Male Flare X 1/2" Female Flare Adapter

AD71 CPS Tank Adapter 5/16" (1/2"-20 UNF) Male x 3/4"-14 Female

Brass R-410a international adapter. 1/4" SAE female x 5/16" SAE (1/2"-20 UNF) male. Includes core and depressor.

AD783 CPS Brass R-410a international adapter. 1/4" SAE Female X 5/16" SAE (1/2"-20 UNF) Male Adapter (3 Pk)

(100 Pack) Brass R-410a international adapter. 1/4" SAE female x 5/16" SAE (1/2"-20 UNF) male. Includes core and depressor.

Brass tank adapter. 1/2" ACME male x 3/4''-14 female. For use with large 125 lb. cylinders.

AD81B CPS Tank Adapter 3/4"-14 X 1/2" ACME Male (100)

3 pack of brass adapters. 1/4" SAE male x 1/2" ACME female. For use with vacuum pumps, manifolds, and recovery tanks

AD849C 1/4" Male Flare x 1/2" Acme Female 90º Swivel Access Adapter. Female side features knurled fitting with a valve core depressor. Great for getting into tight spaces where a regular refrigerant hose wont reach.

AD84B CPS 1/4" Male Flare x 1/2" ACME Female Adapter (100 Pack). For use with vacuum pumps, manifolds, and recovery tanks.

AD84C CPS 1/4" Male Flare With Core x 1/2" ACME Female Adapter (3 Pack). For use with vacuum pumps, manifolds and recovery tanks.

AD87 CPS 1/4" Male Flare x 5/16" Female (1/2"- 20 UNF) R-410A Adapter with valve core and depressor.

AD87S CPS 1/4" Male Flare x 5/16" Female (1/2"- 20 UNF) R-410A 45º Swivel Adapter with valve core and depressor.

The CPS ADK1234adaptor kit allows use of you your R-134a manifold to check older R-12 systems. The kit includes high side and low side adapter hoses for R-12 vehicles and connect to your existing 134A couplers to the vehicle. The kit also includes several 1/4 flare to ACME adapters for cylinders and recovery units.

R-12 to R-134a Charge & Vacuum Adapter Kit. Includes: QCL14 R-134a LO Side Premium Manual Coupler, 1/4" SAE Fittings, AD12 Automotive 1/2'' ACME F x Low-Side R-134a adapter, TLCT134 Can Tap, 1/2" ACME Fitting, AD48 1/4" SAE Female x 1/2" ACME Male Adapter, AD84 1/4" SAE male x 1/2" ACME female Adapter, QCH14 R-134a HI Side Premium Manual Coupler, 1/4" SAE Fittings.

ADXFW CPS 3/4 Fiber Washer For AD Series 3/4 Tank Adapters (6-Pk)

AVC4R CPS 1/4" Flare Brass Cap With Core Remover (6 Pack)

AVC4RB CPS 1/4" Flare Brass Cap With Core Remover (100 Pack)

BV CPS Ball-Valve 1/4'' Male Flare X 1/4'' Female Flare Swivel. Add to existing hose to eliminate refrigerant loss and comply with EPA regulations. Life cycle tested - 140,00 cycles open/close without a leak. Includes all three color-coded handle inserts

Brass Ball Valve (BV) for 1/2'' ACME Male to 1/2'' ACME Female. Life-cycle tested - 140,00 cycles open/close without a leak. Add existing hose to eliminate refrigerant loss comply with EPA regulations. Easy 1/4 turn open/close with rugged plastic composite color-coded handles. Oversized chrome ball for smooth operation and non-restrictive flow. Individual valves includes all three color-coded handle inserts.

Three Pack of brass ball valves (BV) for 1/4'' SAE male to 1/4'' SAE female. Life-cycle tested - 140,00 cycles open/close without a leak. Add existing hose to eliminate refrigerant loss comply with EPA regulations. Easy 1/4 turn open/close with rugged plastic composite color-coded handles. Oversized chrome ball for smooth operation and non-restrictive flow. Individual valves includes all three color-coded handle inserts.

BV38 CPS Ball-Valve for 3/8" Male Flare X 3/8" Female Flare Add to existing hose to eliminate refrigerant loss and comply with EPA regulations. Lifecycle tested - 140,00 cycles open/close without a leak. Includes all three color-coded handle inserts.

Add to existing hose to eliminate refrigerant loss and comply with EPA regulations. Lifecycle tested - 140,00 cycles open/close without a leak. Includes all three color-coded handle inserts

Add to existing hose to eliminate refrigerant loss and comply with EPA regulations. Lifecycle tested - 140,00 cycles open/close without a leak. Includes all three color-coded handle inserts

Brass ball valve (BV) for 1/2''-20 UNF male to 1/2''-20 UNF Male with 90° bend. Life-cycle tested - 140,00 cycles open/close without a leak. Add existing hose to eliminate refrigerant loss comply with EPA regulations. Easy 1/4 turn open/close with rugged plastic composite color-coded handles. Oversized chrome ball for smooth operation and non-restrictive flow. Individual valves includes all three color-coded handle inserts.

BV410A CPS Ball-Valve R-410A 1/4'' SAE Male X 1/2''-20 UNF Female. Life-cycle tested - 140,00 cycles open/close without a leak. Add existing hose to eliminate refrigerant loss comply with EPA regulations. Easy 1/4 turn open/close with rugged plastic composite color-coded handles. Oversized chrome ball for smooth operation and non-restrictive flow. Individual valves includes all three color-coded handle inserts.

Brass 45° Swivel Elbow x Male Full Flow Ball Valve, 1/4" SAE Female x 1/4" SAE Male. LIFECYCLE TESTED - 140,00 cycles open/close without a leak. Add existing hose to eliminate refrigerant loss comply with EPA regulations. Easy 1/4 turn open/close with rugged plastic composite color-coded handles. Oversized chrome ball for smooth operation and non-restrictive flow. Individual valves includes all three color-coded handle inserts.

Brass 45° Swivel Elbow x Male Full Flow Ball Valve, 1/4" SAE Female x 1/4" SAE Male. LIFECYCLE TESTED - 140,00 cycles open/close without a leak. Add existing hose to eliminate refrigerant loss comply with EPA regulations. Easy 1/4 turn open/close with rugged plastic composite color-coded handles. Oversized chrome ball for smooth operation and non-restrictive flow. Individual valves includes all three color-coded handle inserts.

BV90 CPS Hose End Ball-Valves 1/4" Male Flare x 1/4" Female Swivel 90°. Life-cycle tested - 140,00 cycles open/close without a leak. Add existing hose to eliminate refrigerant loss comply with EPA regulations. Easy 1/4 turn open/close with rugged plastic composite color-coded handles. Oversized chrome ball for smooth operation and non-restrictive flow. Individual valves includes all three color-coded handle inserts.

Three pack of brass BV90 Hose End Ball-Valves 1/4" Male Flare x 1/4" Female Swivel 90°. Life-cycle tested - 140,00 cycles open/close without a leak. Add existing hose to eliminate refrigerant loss comply with EPA regulations. Easy 1/4 turn open/close with rugged plastic composite color-coded handles. Oversized chrome ball for smooth operation and non-restrictive flow. Individual valves includes all three color-coded handle inserts.

Add to existing hose to eliminate refrigerant loss and comply with EPA regulations. Lifecycle tested - 140,00 cycles open/close without a leak. Includes all three color-coded handle inserts

BVAD38 CPS Hose End Ball-Valves 1/4" Male Flare x 3/8" Female Swivel. Life-cycle tested - 140,00 cycles open/close without a leak. Add existing hose to eliminate refrigerant loss comply with EPA regulations. Easy 1/4 turn open/close with rugged plastic composite color-coded handles. Oversized chrome ball for smooth operation and non-restrictive flow. Individual valves includes all three color-coded handle inserts.

BVM CPS Ball Valve 1/4" SAE Male Flare X 1/4" SAE Male Flare. Life-cycle tested - 140,00 cycles open/close without a leak. Add existing hose to eliminate refrigerant loss comply with EPA regulations. Easy 1/4 turn open/close with rugged plastic composite color-coded handles. Oversized chrome ball for smooth operation and non-restrictive flow. Individual valves includes all three color-coded handle inserts.

BVM3 CPS BVM Ball Valve 1/4" SAE Male Flare X 1/4" SAE Male Flare (3 Pack). Life-cycle tested - 140,00 cycles open/close without a leak. Add existing hose to eliminate refrigerant loss comply with EPA regulations. Easy 1/4 turn open/close with rugged plastic composite color-coded handles. Oversized chrome ball for smooth operation and non-restrictive flow. Individual valves includes all three color-coded handle inserts.

BVXH CPS Ball Valve Handle With Red, Blue & Yellow Inserts

Shut off valve is great for blanking off any vacuum system and works for pressures up to 800 LBS. Made in the USA.

1/4'' female swivel coupler with o-ring seal. Made in the USA.

3/8'' swivel coupler with o-ring seal. Made in the USA.

FA1234X35 CPS 1234YF Low Side / High Side Coupler docking and coupler adapter fittings set. 1/4 SAE Female Flare x HFO with schrader valve core.

HTAD2 CPS Flexible Adapter 1/4"MFL X 1/8" Female Flare is great for hooking up A/C systems for evacuation and recharging.  Adapters fit most systems, and sizes are available to fit most passenger cars.  Features brass fittings and a durable neoprene-coated hose, 6" long.

HTAD3 CPS 3/16in. FFL 1/4in. MFL 90 Degree Quick Coupler Adapter is great for hooking up A/C systems for evacuation and recharging. Features brass fittings and a durable neoprene-coated hose, 6" long.

MBV4-01 JB Industries 1/4" Compact Mini Ball Valve

JB Industries 1/4" Compact Mini Ball Valve (3 Pack)

MBV5-01 JB Industries 5/16" Compact Mini Ball Valve

JB Industries 5/16" Compact Mini Ball Valve (3 Pack)

QC1214SET HFO1234yf Conversion Set includes a manual coupler set with 14mm hose fittings for R-134a gauges. Features 6 latching balls to provide superior alignment and seal. 14mm female thread fits on R-134a manifold gauges. Convert older R-134a manifolds to use with HFO1234yf. Includes AD88L HFO Tank adapter, 1/2" Acme Male Right Hand Thread x 1/2" Acme Female Left Hand Thread.

QC123414SET CPS HFO1234yf Manual Coupler Set 1/4 Flare Fittings. 6 latching balls provide superior alignment. 1/4" male flare thread. Convert older R-12 manifolds & machines to use HFO1234yf.

QC1234SET CPS HFO1234yf Manual Coupler Set 12mm Fittings. 6 latching balls provide superior alignment. 12mm female thread. Used with HFO1234yf machines and manifolds.

Quick Connect couplers for automotive 134a fittings feature quick push on air hose style coupling action. 14mm hose thread for most 134a hoses.

These patented couplers include latching balls to provide superior service port alignment, cross pin valve depressor control, and a safety sleeve to prevent accidental refrigerant venting.

This automotive coupler set can be used to connect 1/4" flare fitting hoses to be used for R-134a automotive applications. Includes (1) CPSAD84 1/2" ACME Female X 1/4" Male Adapter for tanks.

Change your old R-12 brass manifold to R-134a with the QC90SET . Many A/C injectors use the quick connect snap style for the low side dye/oil application.

QCH1214MM CPS HFO1234yf High Side Manual Coupler 14mm Fittings. 14mm female thread. Convert older R-134a manifolds & machines to HFO1234yf.

QCH1234 CPS HFO1234yf HI Side Manual Coupler 12mm Fittings. 6 latching balls provide superior alignment. 12mm female thread. Used with HFO1234yf machines and manifolds. One year warranty.

QCH123414 CPS HFO1234yf HI Side Manual Conversion Coupler 1/4" Flare Fittings. 6 latching balls provide superior alignment. 1/4" male flare thread. Convert older R-12 manifolds & machines to use HFO1234yf.

This patented coupler includes latching balls to provide superior service port alignment, cross pin valve depressor control, and a safety sleeve to prevent accidental refrigerant venting. 14mm hose fitting.

R-134a HI Side Snap Coupler, 14mm Fittings

R-134a HI Side Premium Manual Coupler, 1/4" SAE Fittings

Change your old R-12 brass manifold to R-134a with using the QCH90 coupler. Many A/C injectors use the quick connect snap style for the low side dye/oil application.

QCL1214MM CPS HFO1234yf LO Side Manual Coupler 14mm Fittings. 14mm female thread. Convert older R-134a manifolds & machines to HFO1234yf.

QCL1234 CPS HFO1234yf LO Side Manual Coupler 12mm Fittings 12mm Fittings. 6 latching balls provide superior alignment. 12mm female thread. Used with HFO1234yf machines and manifolds. One year warranty.

QCL123414 CPS HFO1234yf LO Side Manual Conversion Coupler 1/4" Flare Fittings. 6 latching balls provide superior alignment. 1/4" male flare thread. Convert older R-12 manifolds & machines to use HFO1234yf.

This patented coupler includes latching balls to provide superior service port alignment, cross pin valve depressor control, and a safety sleeve to prevent accidental refrigerant venting. 14mm hose fitting.

R-134a LO Side Snap Coupler, 14mm Fittings

R-134a LO Side Premium Manual Coupler, 1/4" SAE Fittings

Change your old R-12 brass manifold to R-134a with this LO side coupler . Many A/C injectors use the quick connect snap style for the low side dye/oil application.

HI (5ea.) & LO (5ea.) O-Rings for Premium Couplers (QCH90/QCL90)

QCXR1234 CPS High & Low O-Rings for HFO Premium Couplers Pack of 5 sets

HI (5ea.) & LO (5ea.) O-Rings for Premium Couplers (QCH14/QCL14). Use with older version of CPS Premium Coupler (Brass Or Chrome Finish with blank handles) Use black o-rings. Low side is 5/8" OD X 7/16" ID. High side is 3/4" OD X 9/16" ID X 3/32" Thick. Current Version of the CPS Premium Coupler (CPS Labels on the knob) Use the green o-rings. Low side is 15.6 mm OD X 10.8 mm ID X 2.4 mm Thick. High side o-ring is 18.6 mm OD X 13.8 mm ID X 2.4 mm Thick.

RA30074 Robinair Low Side Coupler 1234yf
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

RA30075 Robinair High Side Coupler 1234yf
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

TLCT12 CPS R-12 Side Can Tap Valve

This unique new design makes servicing A/C systems with 12 oz. cans of R12 or R134A refrigerant (and 4 oz cans of oil charge) faster and easier then ever before. One tool for 3 different diameters of cans. The dual 1/4'' SAE and 1/2'' ACME tee fittings gives you the field versatility you desire. Permanently attached wiveling inserts means you never have to search for lost pieces.

Replacement Gasket for TLCT12 & TLCT34

One 3/8'' female flare x 1/2'' male flare brass adapters made in the USA using the highest level of brass consisting of 65% copper and 35% zinc which means high-tensile strength while resisting corrosion. The forging process of fittings maximize strength and eliminate cracking.