• 2-amp constant DC output current
• Micro-processor controlled three-stage charging extends battery life
• Easy battery connection through three types of connectors provided with the unit
• Clip Leads, DC Lighter Plug and Ring Terminals
• “Plug and play” charging solution; requires no installation or setup
• Wide voltage range operation (90 to 132 V, 50/60 Hz)
• Small footprint, lightweight
• Includes detachable mounting feet

Product Specifications
AC
Output current	2 Amps
Output voltage (nominal):
Charge	14.4 Vdc
Float	13.0 Vdc
Equalize	N/A
AC input voltage	115 V, 50/60 Hz
Inverter no-load current	N/A
Inverter low-battery shutdown	N/A
DC
Internal battery type (recommended)	Sealed lead-acid, AGM
Internal battery size (recommended)	6 - 50 Ah
Internal battery voltage	N/A
Charging type Three stage (see note below)
General Specifications
2 Amp Battery Maintainer
Part number	804-0027-07
Unit dimensions	(L x W x H) 5.5 x 3.2 x 2.5” (14 x 8.3 x 6.4 cm)
Unit weight	1 lb (0.45 kg)
Warranty	Twelve months
Operating temperature	32°F to 104°F (0°C to 40°C)
Storage temperature	77°F to 158°F (-25°C to 70°C)
Note: Three-Stage Charging
Multistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages: Bulk: Replaces 70-80% of the battery’s state of charge at the fastest possible rate. Absorption: Replenishes the remaining 20-30% of charge, bringing the battery to a full charge at a slow, safe rate. Float: Voltage is reduced and held constant in order to prevent damage and keep batteries at a full charge.