12-1012 Associated Digital Battery Electrical System Analyzer Tester with USB Port - This light weight hand-held digital battery tester with USB port for printing to a PC stores the last test series with or without power to the unit. The battery test displays a multitude of data including estimated remaining battery life.

12-1015 Associated Digital Battery Electrical System Analyzer Starter, Alternator, Ground and Battery Test with Built-in Thermo Printer and USB Port

The model 12-2415 analyzer performs 12V battery and electrical systems testing including the ripple diode test and earth ground as well as 24V starter and alternator systems. The tester has an integrated thermal printer with customizable header for shop use as well as the ability to key-in particulars for the battery model, vehicle license plate and customer name and is reverse-polarity protected.

12-2416 Associated Barcode Scanner For 12-2415 For use in scanning the bar code on the battery for warranty purposes and for battery verification and record keeping.

1699501129 6-PIN CABLE FOR HDS250

200DTK Auto Meter 12/24 Volt Fully Automatic Electrical System Tester - Professional grade, fully automatic electrical system tester specifically designed for diagnosing heavy-duty batteries and electrical systems.The BCT-200J utilizes Auto Meter's advanced preventative maintenance testing mode to quickly check the battery and starting/charging.

200DTP Auto Meter 12/24 Volt Fully Automatic Electrical System Tester with Printer - Professional grade, fully automatic electrical system tester specifically designed for diagnosing heavy-duty batteries and electrical systems.The BCT-200J utilizes Auto Meter's advanced preventative maintenance testing mode to quickly check the battery and starting/charging.

Speed. Accuracy. Reliability. These are the cornerstones behind the technology in our digital battery testers. 3183 tests 12 volt batteries (125-1400 CCAs) and analyzes by measuring multiple parameters within the battery to deliver accurate results.

OTC 3184 Made for the professional technician,the 3184 tests batteries and starting/ charging systems faster than ever before. The BCS System Analyzer has an operating range of 50-2000 CCA ’s and is able to store data in memory or remotely print out the results using an infrared printer interface.

12-Volt Electronic Battery & Electrical System Tester

6044 Associated Equipment Model 6044 Automated Battery / Electrical System Tester - An automated battery testing unit that uses no dirty, maintenance-prone carbon piles. Just enter the discharge current, press the “start” button and the 6044 will perform the BCI battery test automatically, giving the most accurate means of testing a battery. Testing for the alternator and starter has also been automated, simplifying the use of this very versatile electrical tester.

6044 Associated Equipment Model 6044 Automated Battery / Electrical System Tester with 6038C Cart - An automated battery testing unit that uses no dirty, maintenance-prone carbon piles. Just enter the discharge current, press the “start” button and the 6044 will perform the BCI battery test automatically, giving the most accurate means of testing a battery. Testing for the alternator and starter has also been automated, simplifying the use of this very versatile electrical tester.

Digital Battery Tester

900165 Associated Test Lead Set 12-2415

The Ultimate Portable Multi-Meter.  This handy multimeter can be used in a variety of applications. Measures both AC and DC voltages to 400 Volts; AC and DC current to 200 Amps as well as resistance and continuity upon voltage. Low Level DC Amp Range for easy detection of excessive parasitic drain. 200A DC Amp Range measures system output level for advanced starter diagnosis. Small Jaw Size allows for fitting into tight places and ensures accurate measurement.

The BA227 offers a complete testing solution for 12 Volt batteries and systems. Features an operating range from 6.5-15V and a testing capacity from 100-1400 CCA. Compatible with a wide variety of battery types, the BA227 is designed to test flooded, AGM flat plate, spiral wound, gel cell, start-stop AGM and enhanced flooded batteries. It features 36" cable leads, replaceable cable ends, temperature compensation and an easy-to-use interface.

The new BA327 Solar Digital Battery and System Tester with Integrated Printer, Model No. BA327, offers a complete testing solution for 6 and 12 Volt batteries and 6, 12 and 24 Volt charging systems. Compatible with a wide variety of battery types, it features easy, intuitive operation with quick, accurate assessment of battery condition and starting and charging system performance

The new BA427 Solar Digital Battery and System Tester with Integrated Printer, Model No. BA427, offers a complete testing solution for 6 and 12 Volt batteries and 6, 12 and 24 Volt charging systems. Compatible with a wide variety of battery types, it features easy, intuitive operation with quick, accurate assessment of battery condition and starting and charging system performance.

The BA44 Digital Battery and System Tester tests 6V and 12V batteries, starting systems and charging systems. It features an operating range of 1.5V-15V and the capacity to test batteries rated between 40-2000 CCA. This tester is compatible with a wide range of battery types, including conventional, maintenance free, AGM, gel cell, deep cycle and marine batteries. The BA44 can properly assess battery condition in discharged batteries. Features long 6’ leads for convenience and a bright, backlit LCD display. It is compatible with Multiple Battery Types: Conventional, Maintenance Free, AGM, Gel Cell, Spiral Wound, Deep Cycle, Marine Starting Batteries.

The Solar BA5 12V Battery Tester features an operating range of 7-15V and the capacity to test batteries rated between 100-1200 CCA. It offers quick assessment, providing both a numerical result and a pass/fail LED result. It is compatible with a wide range of battery types, including Conventional, Maintenance Free, AGM, Gel Cell, Deep Cycle and Marine batteries.

The BA6 Battery and System Tester features an operating range of 4.5-16V and is optimized to test six distinct battery types: Conventional Flooded Acid, AGM Flat Plate, AGM Spiral Wound, Start-Stop AGM, Start-Stop Enhanced Flooded and Gel Cell batteries. It also features the convenience of starting and charging system testing, offering quick assessment and providing both a numerical result and a pass/fail result.

The Solar BA7 12V Battery and System Tester features an operating range of 7-15V and the capacity to test batteries rated between 100-1200 CCA. It adds the convenience of starting and charging system testing and offers quick assessment, providing both a numerical result and a pass/fail LED result. It is compatible with a wide range of battery types, including Conventional, Maintenance Free, AGM, Gel Cell, Deep Cycle and Marine batteries.

BAA3 Solar Replacement Clamp Set For BA327/BA427

Used with the BA427, the BAA7 Volt Probe can be used to acquire voltage readings from components and wiring in the electrical system being tested. To activate the Volt Probe, the operator selects it from the Configuration screen. The BA427 will then show voltage readings acquired from the probe on its display. The results can then be stored, printed or downloaded to the PC.

BAA8 Solar Amp Clamp Accessory For BA427 Battery Tester. The BAA8 Amp Clamp can be used to acquire amperage readings from wiring within the electrical system. To activate the Amp Clamp function on the BA427, the operator selects it from the Configuration screen. The BA427 will then show amperage readings acquired from the amp clamp on its display. 0-600 Amp range is more than ample for trucks and buses. Extends the diagnostic capabilities of the tester.

BAT120 Battery and Starter/Charger System Tester (1699501320). The BAT 120 is a wireless battery and starting/charging system tester used with the Bosch ADS 325 and ADS 625 diagnostic tools. The BAT 120 sends data directly to an app pre-installed on the Bosch ADS tools, saving time and putting more vehicle diagnostic information on the scan tool.

The BAT 135 battery tester with integrated printer tests 6V and 12V batteries from 40 - 2,000 CCA including AGM, Gel cell, flooded lead-acid, start/stop EFB and Commercial SLI batteries using a micro-load test for proven, accurate results. It will also test 12V and 24V charging systems with a diode/ripple test. The integrated printer captures test results for customer records, presenting state of health and state of charge percentage. Test clamps are detachable for service or replacement.

200DTP Auto Meter 12/24 Volt Fully Automatic Electrical System Tester with Printer - Professional grade, fully automatic electrical system tester specifically designed for diagnosing heavy-duty batteries and electrical systems.The BCT-200J utilizes Auto Meter's advanced preventative maintenance testing mode to quickly check the battery and starting/charging.

The BCT-460 is the ultimate handheld electrical system tester specifically designed for the heavy-duty truck market. Through the use of state of the art digital circuitry, a separable tablet and control module, and Auto Meter’s optional AMPNET cloud data management services, the BCT-460 delivers accurate, reliable, and fast testing results all-in-one new innovative Wi-Fi enabled device.

The BCT-468 is the ultimate handheld electrical system tester specifically designed for the heavy-duty truck market. Through the use of state of the art digital circuitry, a separable tablet and control module, and Auto Meter’s optional AMPNET cloud data management services, the BCT-468 delivers accurate, reliable, and fast testing results all-in-one new innovative Wi-Fi enabled device.

BVA-300 Auto Meter Hand Held Electrical System Analyzer with 40 Amp Load - The BVA-300 is a Technician grade handheld electrical system tester that preforms a compete electrical system test in less than 82 seconds. Utilizing an on-board 40 amp load, the BVA-300 uses patented Digital Pulse Load technology to fully test most batteries, starters and alternators completely.

BVA-300PR Auto Meter Hand Held Electrical System Analyzer with Boot and Printer - The BVA-300 is a Technician grade handheld electrical system tester that preforms a compete electrical system test in less than 82 seconds. Utilizing an on-board 40 amp load, the BVA-300 uses patented Digital Pulse Load technology to fully test most batteries, starters and alternators completely.

BVA2100 Auto Meter Heavy-Duty Automated Electrical System Analyzer - The BVA-2100 is the ultimate electrical system tester specifically designed for the Heavy Duty market. Through the use of state of the art digital circuitry and a 400 amp True Load system , the BVA-2100 delivers the word's most accurate, reliable, and fastest testing results for batteries, charging systems, starting systems, and voltage drop testing for heavy duty applications.

BVA2100K Auto Meter HD Automatic Battery / Electrical System Tester with ES-8 Stand Kit - This is the ultimate battery and electrical system tester, incorporating Auto Meter's Advanced DPL Technology. The BVA-2100 can be used for both automotive and heavy-duty applications. Featuring our patented automated voltage drop technology, the BVA-2100 accurately pinpoints electrical system problems (battery, starter, alternator, wiring, and connections). Product firmware includes J1708 compatibility with optional J1708 cables.

BVA2100KP Auto Meter HD Automatic Battery / Electrical System Tester Kit with ES-8 Stand and AC-14 Printer - This is the ultimate battery and electrical system tester, incorporating Auto Meter's Advanced DPL Technology. The BVA-2100 can be used for both automotive and heavy-duty applications. Featuring our patented automated voltage drop technology, the BVA-2100 accurately pinpoints electrical system problems (battery, starter, alternator, wiring, and connections). Product firmware includes J1708 compatibility with optional J1708 cables.

DCA-8000P Midtronics Diagnostic Charging System, Conductance Profiling and Dynamic Charge Acceptance, Manual Charge Mode, Jump Start Mode, Reflash Mode, Includes Integrated Printer. Combined with Conductance Profiling™, enables quick and accurate battery
diagnosis, avoiding time wasted charging bad batteries. Mimics the
start event with a large load, then applies a charge for a short period
time. Performs critical diagnostics to verify battery can support
start-stop applications

The EXP-1000HD from Midtronics was created specifically for the heavy-duty commercial/fleet market. Using new Dynamic Conductance Battery Testing Technology, and designed for maximum flexibility, this analyzer will quickly become your electrical diagnostic tool of choice. Specific features for commercial/fleet maintenance include battery pack testing, multiple battery routines for up to 6 batteries, special commercial battery algorithms, and application specific test parameters for system and cable drop testing.

Increase your service efficiency and overall customer satisfaction with the GR8-1100 from Midtronics. This all-in-one portable battery diagnostic station offers intelligent, controlled, and rapid charging combined with battery state-of-health analysis. Routine maintenance checks are performed quickly and efficiently by identifying batteries nearing the end of their useful life before they fail out on the road. The contoured rolling cart with detachable controller and optional integrated printer give you maximum flexibility for customer consultations anywhere in your shop. Increase your battery sales and customer satisfaction scores with the Midtronics GR8.

Increase your service efficiency and overall customer satisfaction with the GR8-1100 from Midtronics. This all-in-one portable battery diagnostic station offers intelligent, controlled, and rapid charging combined with battery state-of-health analysis. Routine maintenance checks are performed quickly and efficiently by identifying batteries nearing the end of their useful life before they fail out on the road. The contoured rolling cart with detachable controller and optional integrated printer give you maximum flexibility for customer consultations anywhere in your shop. Increase your battery sales and customer satisfaction scores with the Midtronics GR8.

The GR8-1200 Multi-tasking Battery and Electrical Diagnostic Station combines the diagnostic charging expertise of the GR8 with EXP Battery and Electrical System Diagnostics to create a complete, flexible and expandable diagnostic station. The GR8-1200 features the new Multi-tasking Bridge, which allows the user to perform battery and electrical diagnostics on other vehicles while the charger is in use. That means you can now more effectively multi-task in the garage and get more value out of one complete diagnostic station. Simply connect the test clamps to perform a full battery and electrical system analysis. If the battery needs charging, connect the charger clamps and the GR8 takes over. If you have more work to do while the battery is being charged, remove the EXP-1200 controller from the cart and take it to work on the other side of the garage. When the GR8 finishes the job, the Multi-tasking Bridge provides LED and audible alarms so that you can wirelessly send the results from the bridge to the controller to view or print.

The GR8-1200 Multi-tasking Battery and Electrical Diagnostic Station combines the diagnostic charging expertise of the GR8 with EXP Battery and Electrical System Diagnostics to create a complete, flexible and expandable diagnostic station. The GR8-1200 features the new Multi-tasking Bridge, which allows the user to perform battery and electrical diagnostics on other vehicles while the charger is in use. That means you can now more effectively multi-task in the garage and get more value out of one complete diagnostic station. Simply connect the test clamps to perform a full battery and electrical system analysis. If the battery needs charging, connect the charger clamps and the GR8 takes over. If you have more work to do while the battery is being charged, remove the EXP-1200 controller from the cart and take it to work on the other side of the garage. When the GR8 finishes the job, the Multi-tasking Bridge provides LED and audible alarms so that you can wirelessly send the results from the bridge to the controller to view or print.

GRX-3000 Midtronics Battery Diagnostic Station 6 & 12 Volt Midtronics GRX-3000 Battery Diagnostic Station. Easy-to-use scalable solution designed to support full-service battery management programs. Fast, accurate and reliable, the GRX can determine, often in less than five minutes, the difference between a recoverable battery and one that is not. Diagnostic charging is uniquely designed to continuously monitor the charging progression. Each session is customized and highly controlled charging stops as soon as a battery can be returned to the customer or is determined to require replacement. Defective batteries with open welds and shorts are identified rapidly and recoverable batteries are quickly and safely charged, putting your customers back on the road faster. The GRX diagnostic station delivers better efficiency in the shop, clearer test results and more accurate preventative maintenance decisions by helping to eliminate guesswork and wasted time charging defective batteries.

GRX-3000 Midtronics Battery Diagnostic Station 6 & 12 Volt Midtronics GRX-3000 Battery Diagnostic Station. Easy-to-use scalable solution designed to support full-service battery management programs. Fast, accurate and reliable, the GRX can determine, often in less than five minutes, the difference between a recoverable battery and one that is not. Diagnostic charging is uniquely designed to continuously monitor the charging progression. Each session is customized and highly controlled charging stops as soon as a battery can be returned to the customer or is determined to require replacement. Defective batteries with open welds and shorts are identified rapidly and recoverable batteries are quickly and safely charged, putting your customers back on the road faster. The GRX diagnostic station delivers better efficiency in the shop, clearer test results and more accurate preventative maintenance decisions by helping to eliminate guesswork and wasted time charging defective batteries.

Maximum battery testing productivity The MDX-600 Series from Midtronics combines 30 years of experience and innovation gained from selling essential tools to nearly every car and truck OEM in the world, with the industry standard conductance technology for battery testing to make testing safe, fast, and simple. Save Time and Money by Improving Battery Testing Productivity The MDX-600 Series helps you improve customer service by reducing wait times. Increase sales by proactively testing batteries and electrical systems. Increase customer satisfaction by identifying potential problems before they occur. MDX-600 Series advanced features include Multiple vehicle applications, battery types and rating systems. Large back-lit screen and improved user interface. Integrated printer option Improved removable cable design.

The MDX Series advanced features include: Multiple vehicle applications, battery types, and rating systems Large back-lit screen and improved user interface Integrated printer option Improved Removable Cable Design Which helps to: Save time and money by improving battery and electrical diagnostic productivity Improve customer service by reducing wait time Increase sales by proactively testing batteries and electrical systems Increase customer satisfaction by identifying potential problems before they occur.

The MDX Series advanced features include: Multiple vehicle applications, battery types, and rating systems Large back-lit screen and improved user interface Integrated printer option Improved Removable Cable Design Which helps to: Save time and money by improving battery and electrical diagnostic productivity Improve customer service by reducing wait time Increase sales by proactively testing batteries and electrical systems Increase customer satisfaction by identifying potential problems before they occur.

MDX-700-HD Midtronics Heavy Duty Battery Conductance and Electrical System Analyzer - Introducing the MDX-700 HD from Midtronics, the worldwide leader in battery and electrical diagnostics. Created specifically for the heavy-duty commercial/fleet market, the new MDX-700 HD uses Midtronics’ advanced conductance technology, making it easy for anyone to test the full electrical system on heavy duty vehicles.

MDX-700P-HD Midtronics Heavy Duty Battery Conductance and Electrical System Analyzer with IR Printer - Introducing the MDX-700 HD from Midtronics, the worldwide leader in battery and electrical diagnostics. Created specifically for the heavy-duty commercial/fleet market, the new MDX-700 HD uses Midtronics’ advanced conductance technology, making it easy for anyone to test the full electrical system on heavy duty vehicles.

The MDX-P300 performs a quick, simple, and accurate battery or system test in seconds without heat, sparks, or user interpretation. The results can then be printed and reviewed immediately with customers for added impact to preventative maintenance routines and customer service. Using patented conductance technology and time-tested reliability, Midtronics testers are required for warranty testing and preventative maintenance at automotive dealers around the world.

PBT-100 Midtronics Battery Conductance Tester, Using Midtronics' PBT-100 battery/charging system tester, technicians now have a version of the same tester required for use in OEM dealer service organizations around the world. The PBT-100 makes the leading technology affordable, so every technician can experience the advantages of conductance testing: a safe, fast, simple and portable system that improves productivity and accuracy.

The PBT-200 makes it affordable for anyone to experience the advantages of conductance testing: a safe, fast, simple, and portable tester that improves productivty and accuracy. With proven conductance technology and test algorithms use by automotive OEM dealers and service organizations around the world

The PBT-300 represents the latest in the PBT series of battery and electrical system testers designed for the professional technician. The PBT-300 offers the proven features of the industry favorite PBT-100 and PBT-200 with more! Expanded Test Range and Electrical System Diagnostics! The PBT-300 brings even more of the power of Midtronics battery and electrical system testing technology from the show  to the palm of the technician''s hand. An expanded test range enhances the utility of the PBT-300 and electrical system diagnostics make troubleshooting even easier than before!

Using Midtronics PBT-50 Battery Conductance Tester for Motorcycle and Recreation batteries, recreation vehicle technicians and owners now have a version of the same tester required for use in OEM dealer service organizations around the world. The PBT-50 works for all motorcycle and recreation batteries using a simple reference number for each manufacturer and model.

The SBT1 Schumacher SHUlink Wireless Battery / System Tester is a three-in-one battery tester; battery tester for testing 6 and 12 Volt batteries, charging system tester for testing 12 and 24 Volt charging systems and starting system tester for testing 12 and 24 Volt starting systems. Performs Battery Test displaying state of charge %, Battery voltage, Measured capacity in user selectable rating/ CCA /SAE etc...) 40-2000 CCA. Works with all types of batteries, AGM Spiral, Flooded, AGM Flat Plate, VRLA / Gel. Performs system test displaying cranking volts, alternator idle volts, alternator load volts and diode ripple. Test results can be stored for later retrieval and easily emailed.

The XTC-150 is the perfect combination of a 6 / 12 Volt battery tester and fast charger. Fully automated, just connect the battery enter the battery rating and temperature, and the unit will automatically perform a test and charge analysis. If the battery needs charging before the testing, the XTC-150 will automatically perform that function utilizing AutoMeter's fast charging protocol. Most batteries can be diagnosed and fully charged in under 30 minutes.

XTC-160 Auto Meter 6 / 12 Volt AGM Optimized Automatic Automotive Battery Testing Center and Fast Charger - The next generation of all-in-one battery charging and testing centers is here. The fully automatic smart charger/tester is AGM optimized to safely and accurately charge and diagnose nearly all types of batteries. Using our patented microprocessor technology, the XTC-160 can properly charge most batteries in under 30 minutes. There's even a status bar, so you know exactly how long the process will take.