|
|
|
|
 |
|
BT900 Christie Precision 900 CCA Battery Load Tester
|
Price $299.95
|
|
|

Christie's BT 900 Battery Tester uses a heavy 300 amp load to simulate actual cranking loads. This is the most accurate, reliable, and cost effective battery tester available. Large meter displays give color-coded test results in simple English, pass/fail messages. Simple panel controls adjust for battery capacity and temperature. Tests 12 volt automotive batteries up to 900 Cold Cranking Amps. Has dual capacity dial scale for CCA and CA.
|
|
 |
|
|
|
|
 |
|
BTC Christie Fast Charger / Booster / Battery Load Tester
|
Price $729.95
|
|
|

This charger is a complete Battery Service Center. With one hook-up, the vehicle battery can be charged and load tested. Operation is Simple Fast and Easy. The Built-in Load Tester has capacity for handling 900 CCA batteries. Charging and Testing can be safely done in the vehicle.
|
|
 |
|
|
|
|
 |
|
BTC2 Christie Fast Charger / Booster / Battery Load Tester (230 Volt)
|
Price $855.00
|
|
|

This charger is a complete Battery Service Center. With one hook-up, the vehicle battery can be charged and load tested. Operation is Simple Fast and Easy. The Built-in Load Tester has capacity for handling 900 CCA batteries. Charging and Testing can be safely done in the vehicle.
|
|
 |
|
|
|
|
 |
|
C10122S Christie Dual 10 Amp Constant Current Small Battery Charger / Conditioner
|
Price $609.95
|
|
|

Recover batteries with partial sulfation due to seasonal use or discharge during long storage periods. Electronic controls automatically adjust charging voltage (up to 22 volts) during de-sulfation mode. Designed for small lead-acid and gel cell batteries, the C1012/2S charges two batteries simultaneously and independently at 12 volts.
|
|
 |
|
|
|
|
 |
|
C10612 Christie 10 Amp Multiple Battery Charger For Small Batteries
|
Price $454.54
|
|
|

Designed for small lead-acid and gel cell batteries, the C10612 will charge ten batteries simultaneously at 6 or 12 volts. Equally effective in charging a single battery. Easy to use with no controls to adjust, simply connect batteries to charger and turn it on.
|
|
 |
|
|
|
|
 |
|
C1290 Series Multiple Battery Charger 12 Volt 12 Amp 1-36 Cells
|
Price $638.54
|
|
|

Christie's C 690 and C 1290 Series Battery Chargers are heavy duty continuous rated battery shop equipment for series charging applications. Chargers provide 90 volts finish charge voltage for 36 cells. (six 12 volt batteries). Industrial duty transformer construction and rectifier diodes give these chargers long life and rugged reliability needed for continuous duty in busy shops.
|
|
 |
|
|
|
|
 |
|
C2536D Marine - Industrial Multi-Voltage Battery Charger
|
Price $616.89
|
|
|

Versatile charger for use with 12, 24, 32 and 36 volts lead acid batteries. Continuous duty charging capacity of 25 amps with timer control for rugged and flexible professional service. Heavy duty industrial construction means long life and performance in a variety of marine and industrial applications.
|
|
 |
|
|
|
|
 |
|
C2536D-2 Marine - Industrial Multi-Voltage Battery Charger (230 Volt)
|
Price $757.59
|
|
|

Versatile charger for use with 12, 24, 32 and 36 volts lead acid batteries. Continuous duty charging capacity of 25 amps with timer control for rugged and flexible professional service. Heavy duty industrial construction means long life and performance in a variety of marine and industrial applications.
|
|
 |
|
|
|
|
 |
|
C690 Series Multiple Battery Charger 12 Volt 6 Amp 1-36 Cells
|
Price $508.65
|
|
|

Christie's C 690 and C 1290 Series Battery Chargers are heavy duty continuous rated battery shop equipment for series charging applications. Chargers provide 90 volts finish charge voltage for 36 cells. (six 12 volt batteries). Industrial duty transformer construction and rectifier diodes give these chargers long life and rugged reliability needed for continuous duty in busy shops.
|
|
 |
|
|
|
|
 |
|
CS3 Christie "Smart Starter" Starter Booster Cart
|
Price $493.28
|
|
|

The "Smart Starter" can crank up to 30 cars without the need for recharging the booster battery. That's performance you don't get from the competition.
|
|
 |
|
|
|
|
 |
|
CST800 Christie 800 Amp Charging System Tester With Cart
|
Price $941.59
|
|
|

Preferred by Professionals; heavy duty, fan cooled, high current tester for 6 and 12 volt automotive electrical systems including battery, alternator and starter. The CST 800 offers rugged, accurate testing capacity for heavy use service. Large dual ANALOG meter displays are scaled numerically and in simple English “pass-fail” messages. Portable amp probe measures alternator output current, starter draw and parasitic drain currents. Rugged cart/stand provides mobile use and includes large tool box.
|
|
 |
|
|
|
|
 |
|
CT3 Christie 6/12 Volt 250 Amp Fixed Battery Load Tester
|
Price $284.61
|
|
|

Christie’s T 3 and CT 3 Battery Testers use a heavy fixed load to simulate actual cranking loads. This is the most accurate, reliable, and cost effective battery tester method available. Tests 6 and 12 volt automotive batteries.
|
|
 |
|
|
|
|
 |
|
CT500 Christie 500 Amp Variable Load Carbon Pile Battery Tester
|
Price $432.88
|
|
|

 Heavy Duty high current testing with 500 Amp Carbon pile load control for 6 and 12 volt batteries. The CT 500 offers rugged, accurate battery testing capacity for heavy use battery service. Large dual meter displays are scaled numerically and in simple English "pass-fail" messages. Also measures alternator charging voltage and relative starter current draw.
|
|
 |
|
|
|
|
 |
|
CT800 Christie 800 Amp Variable Load Carbon Pile Battery Tester
|
Price $638.53
|
|
|

Continuous duty, fan cooled high current testing with dual Carbon pile load control for 6 and 12 volt batteries. The CT 800 offers rugged, accurate battery testing capacity for heavy use battery service. Large dual meter displays are scaled numerically and in simple English "pass-fail" messages. Also measures alternator charging voltage and relative starter current draw.
|
|
 |
|
|
|
|
 |
|
FDC Christie 300 Amp 6/12/24 Volt Fleet Duty Battery Charger With Engine Start
|
Price $699.95
|
|
|

With Christie"s standard safety feature package and tough heavy duty construction, this charger has America's best 10/5/1 warranty for years of rugged durability. It has three charge rates (low, medium, high) at each voltage. The timer switch has two-hour range with a "hold" position.
|
|
 |
|
|
|
|
 |
|
FDC2 Christie 300 Amp 6/12/24 Volt Fleet Duty Battery Charger With Engine Start (230 Volt)
|
Price $799.95
|
|
|

With Christie"s standard safety feature package and tough heavy duty construction, this charger has America's best 10/5/1 warranty for years of rugged durability. It has three charge rates (low, medium, high) at each voltage. The timer switch has two-hour range with a "hold" position.
|
|
 |
|
|
|
|
 |
|
L1240 Christie 12 Volt 40 Amp Parallel Battery Charger (60 Cells)
|
Price $564.95
|
|
|

Christie's L1240 Recharges ten batteries (4 amps each) in parallel with easy operation for battery stock maintenance and overnight battery charging. Simple to use - only control is the ON/OFF switch. Dual meters allow easy charge monitoring. Automatically tapers control as the battery bank reaches full charge, with automatic current limiting and overload protection.
|
|
 |
|
|
|
|
 |
|
L1240T Christie 12 Volt 40 Amp Parallel Battery Charger (60 Cells) Timer Model
|
Price $574.95
|
|
|

Same as Christie's L1240 but now with "TIMED" Control. The L1240T Recharges ten batteries (4 amps each) in parallel with easy operation for battery stock maintenance and overnight battery charging. Simple to use – Timed and automatic controls make charging safe and easy. Automatically tapers as the battery bank reaches full charge, with automatic current limiting and overload protection. Includes leads for bus bar connection (see leads for bus bar to battery connection CL24). L1240T adds 24 hour timer for safe, convenient extended charging.
|
|
 |
|
|
|
|
 |
|
MCC4X15 Christie Constant Current Wall Mount 4 Battery Charging System
|
Price $1,006.53
|
|
|

 The Christie MCC 4X15 is four chargers in one. Built to be wall-mounted above a charging table or bench without the need for a separate charge bar. Computer controlled electronics provide constant current charging at 15 amps to minimize charging time.
|
|
 |
|
|
|
|
 |
|
MTC2012 Christie Multi-Tech Diagnostic Pulse Charger
|
Price $479.95
|
|
|

Microprocessor Controlled, the MTC 2012 uses a combination of constant current, constant voltage and pulsed charging to correctly charge a range of battery sizes and Regular/AGM construction. Handles large marine deep cycle batteries to small sealed motor cycle batteries, whether the battery construction technology is regular flooded lead acid (max 16.5 charging volts) or the new AGM (absorbed glass mat), Gel, or Spiral (max 14.5 charging volts) battery constructions.
|
|
 |
|
|
|
|
 |
|
PDQ Christie Service Express Super Fast Charger
|
Price $1,028.00
|
|
|

The first patented 80 amp computer controlled service bay charger designed for speed and safety. Now the average automotive battery can be returned to service in 20 to 40 minutes. Minimize charge time; Maximize customer service; Reduce unnecessary warranties. Now you can get the car out of your bay and back on the road in record time. Made In America
|
|
 |
|
|
|
|
 |
|
PDQ2 Christie Service Express Super Fast Charger (230 Volt)
|
Price $1,039.95
|
|
|

The first patented 80 amp computer controlled service bay charger designed for speed and safety. Now the average automotive battery can be returned to service in 20 to 40 minutes. Minimize charge time; Maximize customer service; Reduce unnecessary warranties. Now you can get the car out of your bay and back on the road in record time. Made In America
|
|
 |
|
|
|
|
 |
|
QDD Christie "Dud Buster" 400 Amp 12 Volt Sulfated Battery Charger / Conditioner
|
Price $569.95
|
|
|

With "Deep Discharge Recovery" for charging sulfated or deeply discharged maintenance free and conventional 12 volt batteries. Christie's exclusive "Deep Discharge Recovery" switch provides extra initial charging voltage to break through sulfation.
|
|
 |
|
|
|
|
 |
|
QDD2 Christie "Dud Buster" 400 Amp 12 Volt Sulfated Battery Charger / Conditioner (230 Volt)
|
Price $659.95
|
|
|

With "Deep Discharge Recovery" for charging sulfated or deeply discharged maintenance free and conventional 12 volt batteries. Christie's exclusive "Deep Discharge Recovery" switch provides extra initial charging voltage to break through sulfation.
|
|
 |
|
|
|
|
 |
|
QMT Christie 70/400 Amp Multi-Tech AGM Spiral And Gel Fast Charger / Booster
|
Price $584.95
|
|
|

Christie has introduced a new wheeled service bay fast charger that has charging ranges for both regular Lead Acid batteries and the new AGM, Spiral and Gel batteries. The Model QMT has a 70 amp continuous charging rating and three charge rates for each battery construction.
|
|
 |
|
|
|
|
 |
|
QWC Christie 300 Amp 6/12 Volt Heavy Duty Battery Charger With Engine Start
|
Price $541.12
|
|
|

With Christie"s standard safety feature package and tough heavy duty construction, this charger has America's best 10/5/1 warranty for years of rugged durability. It has three charge rates (low, medium, high) at each voltage. The timer switch has two-hour range with a "hold" position.
|
|
 |
|
|
|
|
 |
|
QWC2 Christie 300 Amp 6/12 Volt Heavy Duty Battery Charger With Engine Start (230 Volt)
|
Price $584.42
|
|
|

With Christie"s standard safety feature package and tough heavy duty construction, this charger has America's best 10/5/1 warranty for years of rugged durability. It has three charge rates (low, medium, high) at each voltage. The timer switch has two-hour range with a "hold" position. (230 Volt)
|
|
 |
|
|
|
|
 |
|
T3 Christie 6/12 Volt 250 Amp Fixed Battery Load Tester
|
Price $259.71
|
|
|

Christie’s T 3 and CT 3 Battery Testers use a heavy fixed load to simulate actual cranking loads. This is the most accurate, reliable, and cost effective battery tester method available. Tests 6 and 12 volt automotive batteries.
|
|
 |
|
|
|
|
 |
|
TC2 Christie Load Tester Service Cart
|
Price $183.94
|
|
|

Sturdy roll-around stand assures steady handling for vehicle service use. With handy large battery tool box and clamp holding brackets.
|
|
 |