Automotive tools & equipment

HVAC & Industrial supplies

Sales - parts -service


  Home > Multimeters & Test Instruments >

296 TPI Autoranging AC/DC True RMS Digital Clamp With Harmonics Indication

296 TPI Autoranging AC/DC True RMS Digital Clamp With Harmonics Indication
 
Price $164.90


Product Code: TPI296
Qty:

Description Prop65
 

TPI 296 clamp-on plus DMM with True RMS and Harmonics capabilities - TPI offers a full line of digital clamp-on meters for electrical, commercial, HVAC/R, industrial and process control applications. Digital Clamp-On Meter Amp Plus. The 296 is a clamp-on plus DMM with True RMS and Harmonics capabilities. The 296 offers measurements in all basic electrical functions, plus:

True RMS: Provides accurate and dependable readings of non-linear loads.

HDR Mode: Determines if a signal is clean or distorted.

Bar Graph: When measuring frequency, bar graph indicates current level.

TRIM Mode: Smoothes out unstable readings.

Peak Mode: For start-up and inrush currents.

Sleep Mode: Preserves battery life

Data Hold: Holds the reading on the display for easy viewing.

Product Features
  • True RMS 700 Amps AC/DC
  • Trim mode for stable readings
  • HDR mode to determine if signal is clean or dirty
  • Measure AC/DC volts, resistance, continuity and frequency
  • Data hold
  • Min/Max/Peak hold
  • Sleep mode
  • CAT III 600 V rated
  • cULus 61010
  • 3-year limited warranty

The 296 comes complete with the following accessories:

  • Carrying Pouch
  • Test Lead Set
  • Instruction Manual
  • Battery

Model 296 Applications

  • Heat anticipator current in thermostats
  • Line voltage
  • Control circuit voltage
  • Heating element resistance
  • Compressor winding resistance
  • Contactor and relay coil resistance
  • Motor and compressor start up current
  • Continuity of wiring
  • Frequency on control and line voltage
  • Record/Min/Max voltage of controls and line voltages
  • Bar graph to indicate rapid fluctuations

Perform the following tests and/or measurements with the 296 and the appropriate function:

HVAC/R

  • ACA - Heat anticipator current in thermostats
  • ACV - Line voltage
  • ACV or DCV - Control circuit voltage
  • OHMS - Heating element resistance (continuity)
  • OHMS - Compressor winding resistance
  • OHMS - Contactor and relay coil resistance
  • ACA - Motor and compressor start up current
  • OHMS - Continuity of wiring
  • Hz/FREQ - Frequency on control and line voltages
  • REC - Record min/max voltage of controls and line voltages
  • ALL - Bar graph to indicate rapid fluctuations

ELECTRICAL

  • ACV - Measure line voltage
  • ACA - Measure line current
  • OHMS - Continuity of circuit breakers
  • DCV - Voltage of direct drive DC motors
  • DCA - Current of direct drive DC motors
  • ACA - Start up current of motors, relays, contactors and transformers
  • ALL - Harmonics detection on line voltages

ELECTRONIC

  • ACV - Measure power supply voltage
  • ACA - Measure power supply current
  • OHMS - Continuity of circuit breakers and fuses

MODEL 296 SPECIFICATIONS

DC Voltage

  • Max Range: 600V
  • Max Resolution: 0.01V
  • Basic Accuracy: 0.75%

AC Voltage

  • Max Range: 600V
  • Max Resolution: 0.01V
  • Basic Accuracy: 1%

DC Amps

  • Max Range: 700A
  • Max Resolution: 0.01A
  • Basic Accuracy: 2%

DC Microamps: N/A

AC Amps

  • Max Range: 700A
  • Max Resolution: 0.01A
  • Basic Accuracy: 2%

Resistance

  • Max Range: 40KΩ
  • Max Resolution: 0.1Ω
  • Basic Accuracy: 1%

Frequency

  • Max Range: 10KHz
  • Max Resolution: 0.1Hz
  • Basic Accuracy: 0.2%

Capacitance: N/A

Temperature: N/A

Non-Contact Voltage (NCV): N/A

Continuity Buzzer: <100Ω

Diode Test: Yes

True RMS Response: Yes

Peak Hold: Yes

Relative Mode: No

Min/Max Record: No

Data Hold: Yes

% Total Harmonic Distortion: Yes

Range Selection: Auto / Manual

Display Type: 4000 count LCD with analog bargraph

Operating Temperature: 14°F to 113°F

Relative Humidity: 80% non-condensing

Storage Temperature: -4°F to 131°F

Battery Type: 9V (MN1604)

Battery Life: 80hrs typical

Auto Off / Sleep Mode: Yes

Dimensions (H x L x W): 1.5” x 7.25” x 2.5”

Weight: 11.1oz

Agency Approval:

  • CE IEC 1010: CAT III, 600V
  • cULus 3111-1

Accessories for this product...
A201 TPI Hard Carrying Case For 290 291 293 296
Price $9.75

Add
A201 TPI Hard Carrying Case For 290 291 293 296


Browse for more products in the same category as this item:

Multimeters & Test Instruments
Multimeters & Test Instruments > Digital Clamp-On Meters