6405 Pomona Electronics Piercing Clips

Home > Multimeters & Test Instruments >

Price $43.70

Product Code: POM6405

Qty:

Description

Stainless steel probe pierces insulation on 22 to 14 AWG (0.030” through 0.180” diameter) gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding due to design. Banana jack accepts all DMM and banana jack leads, Non-rotating banana jack prevents leads from tangling, allowing you to tighten/loosen clamp while still connected to the test lead. For use with test leads with 4 mm banana plugs. Tested to 60 V DC.

Product Features

Make contact with insulated wires without cutting or stripping insulation
Spring loaded double V clamp holds wire centered for piercing needle
Pierces insulation on wires from 22 to 14 AWG (0.030” through 0.180” diameter)
Tiny hole left in insulation can easily be sealed
High visibility bright yellow body
6580 extended length probe has heat resistant Teflon® sleeve.
6405 and 6580 mates with standard .16” (4 mm) banana plug test leads, with or without safety shroud (e.g. 5907A or “B”
series patch cords).
6413 mates with standard .080” (2 mm) standard pin tip test probe (e.g. 5519A).
Red or black color-coded cap for easy identification
Rotating banana jack will not twist test lead while the needle is screwed into wire

MATERIALS:
Piercing tip: hardened stainless steel
Spring: steel
Jack: brass

6405 and 6413:
Banana jack, body and tip: nylon red or black caps with high visibility yellow nylon.
6580 series :
Banana jack and body: red or black caps with high visibility yellow nylon.
Tube: Brass encapsulated with high yellow visibility Teflon® insulation.
Tip: Zytrel ST801

RATINGS:
Operating Voltage: 33Vrms or 70Vdc Max.
Current: 1 Amperes Max.

ORDERING INFORMATION:
6405: for banana plug connections, set includes two clips, one red and one black
6413: for pin tip connections, set includes two clips, one red and one black
6580-12-0: for banana plug connections, black, 12.0” (30 cm) in length.
6580-12-2: for banana plug connections, red, 12.0” (30 cm) in length.
6580-24-0: for banana plug connections, black, 24.0” (60 cm) in length.
6580-24-2: for banana plug connections, red, 24.0” (60 cm) in length.

Browse for more products in the same category as this item:

Multimeters & Test Instruments


63900 Lisle Window Holder	6387 Central Tools 2000 Ft./Lbs. Torque Multipliers	63600 Lisle Cam Action End Filter Wrench	63500 Lisle "Big Range" Strap Oil Filter Wrench
$15.26	$485.10	$10.44	$7.88