Product Features
- Utilizes switching technology which helps restore the batteries that are slightly sulfated
- Switches to float mode after the battery is completely charged
- Maintains the battery charge level during vehicle programming
- Charges deep discharged batteries in about 12 hours
- Maintains the battery charge level if the vehicle or the battery needs to be stored for an extended period of time
- Switches to float mode after the battery is completely charged Utilizes switching technology which helps restore the batteries that are slightly sulfated
- Easy to read LED lights to show the status of charging and battery condition
- Micro processor controlled pulse charger
- LED indicator lights : Red & Green
Input: 110V AC
Application: Lead Acid (FLA, AGM, GEL)
Output: 5Amp /12Vdc
Auto polarity, Spark free & Overcharging Protection
IP65 waterproof, Dust Splash/Rain Protection
Switches automatically to float mode
Light weight, Small package
|
3176 Specifications: |
|
Charge Rate Selection |
5Amp |
|
Control System |
Microprocessor |
|
High Efficiency Power Conversion Technology |
High Frequency |
|
Battery Recondition/Desulfate |
Yes |
|
Charging Voltage (Max) |
14.8V |
|
Charging Current (Max) |
5Amp |
|
Charges & Maintains Batteries |
All types of 12V lead-acid batteries [SLI, MF, VRLA, AGM, and GEL] |
|
Battery Capacity under charge |
10-200 AH |
|
Stages of Automatic Rapid Charging |
5 |
|
AC Voltage input |
120VAC, 60Hz |
|
AC Cable length |
6 Feet (1.80 Meters) |
|
DC Cable length |
6 Feet (1.80 Meters) |
|
Short Circuit Protection |
Yes/Electronic Sensing |
|
No Spark Cables/Clamps |
Yes/Electronic Sensing |
|
Ambient Temperture |
-4ªF to +122ªF [-20ºC to +50ªC] |
|
Insulation |
IP65 Dust/Splash/Rain Proof |
|
Sturdy Case with Mounting
[L x W x H] |
7.75 x 3.75 x 2.25 inches
[19.5 x 9.4 x 5.7 cm] |
|
Weight |
1.87lb [approx. 0.85Kg] |
|
