Automotive tools & equipment

HVAC & Industrial supplies

Sales - parts -service

You are here: Home > Plasma Cutter Parts > 118-012 Solar 15 amp plasma cutter (120 v.) 2010

118-012 Solar 15 amp plasma cutter (120 v.) 2010



118-012 Replacement Parts List
Item No.
 		Part No.
 		Description
1
 238-244-666
 Ground Cable with Clamp

239-010-102
 Clamp Only
2
 238-240-100
 Torch
3
 410-590-036
 Front Panel
4
 312-067-666
 Foot
5
 216-087-166
 Fan Motor
6
 316-009-666
 Fan Blade
7
 413-045-666
 Axle
8
 413-046-666
 Wheel and Hub
9
 880-104-666
 Resistor Assembly
10
 880-106-888
 Control Transformer
11
 410-611-016
 Base
12
 244-078-666
 Rectifier Kit
13
 248-211-666
 Power Cord
14
 246-124-666
 Contactor
15
 245-105-666
 2 Ohm, 420 Watt Resistor
16
 880-109-888
 Transformer
17
 213-034-666
 Capacitor
18
 252-003-666
 Pressure Switch
19
 246-086-666
 Gas Solenoid
20
 253-069-666
 Nylon Adaptor
21
 880-031-666
 9-Pin Wire Harness
22
 880-103-666
 10-Pin Wire Harness
23
 880-102-666
 Printed Circuit Board
24
 246-178-666
 Run / Setup Switch
25
 245-109-666
 Indicator Light
26
 246-188-666
 Power Switch
27
 254-003-666
 Plasma Regulator
28
 251-003-666
 Pressure Gauge
29
 312-099-666
 Nose
30
 412-295-116
 Handle
31
 440-151-126
 Cover
Sort By:
098-142-000 Synthetic Lubricant 1/4oz 4424 098-142-000 Synthetic Lubricant 1/4oz 4424

Synthetic Lubricant for plasma torch O-rings

Price $19.18
131-280-908 Century Torch Standoff Repl. 4416 / 44160 131-280-908 Century Torch Standoff Repl. 4416 / 44160

Century / Solar Plasma Torch Stand-Off Kit keeps nozzle clear of dirt, paint and corrosion. Also simplifies cutting with straightedge or pattern. 131-280-908 TORCH STANDOFF Replaces 4416 / 44160.

Discontinued
238-240-999 Plasma Torch Head For 238-240-100 238-240-999 Plasma Torch Head For 238-240-100

238-240-999 TORCH HEAD FOR 238-240-100, 20 Amp, Used on 15-22 Amp models 118-008 (YA2230), 118-009 (82020, PSC20, 3W722), 118-010 (2020), 118-011 (YA2120), 118-012 (2010), 118-013 (5Z135, 82015).

Discontinued See 238-240-100 Torch
238-244-666 Cable, Ground & Clamp Assembly 238-244-666 Cable, Ground & Clamp Assembly

238-244-666 Cable, Ground & Clamp Assembly

Discontinued
246-086-666 Century Solenoid 24 Volt Air Service, replaces 246-212-666 and 43700008. 246-086-666 Century Solenoid 24 Volt Air Service

246-086-666 Century Solenoid 24 Volt Air Service, replaces 246-212-666 and 43700008, B7161370.

Discontinued
246-199-666 Pilot Arc Relay 24 Volt DC Coil 246-199-666 Pilot Arc Relay 24 Volt DC Coil

246-199-666 Pilot Arc Relay 24 Volt DC Coil

Price $69.95
312-104-000 Plasma Torch Handle Assembly For 238-240-100 312-104-000 Plasma Torch Handle Assembly For 238-240-100

Plasma Torch Handle Assembly, no hardware included. Molded handles only for 238-240-100

Discontinued
334-274-100 Trigger Assembly Replaces 334-281-100 334-274-100 Trigger Assembly Replaces 334-281-100

334-274-100 Trigger Assembly Replaces 334-281-100

Price $34.10
334-277-908 Electrode Plasma 15 20amp 5pkg Repl. 4420 44200 334-277-908 Electrode Plasma 15 20amp Repl. 4420 44200 (5 pack)

Century / Solar Style Electrode. Plasma Cutting Electrodes initiate the high intensity cutting arc and provide the contact necessary for arc maintenance. Electrodes are subject to wear, causing arc to weaken or be intermittent.

Price $37.28 (per 5 Pack)
334-277-908L Electrode Plasma Extended 15 20amp 5pkg 334-277-908L Electrode Plasma Extended 15 20amp 5pkg

Century / Solar Style Electrode. Plasma Cutting Electrodes initiate the high intensity cutting arc and provide the contact necessary for arc maintenance. Electrodes are subject to wear, causing arc to weaken or be intermittent.

Price $31.15 5 Pack
334-278-908 Swirl Ring Plasma 20 Amp Repl. 4422 44220 334-278-908 Swirl Ring Plasma 20 Amp Repl. 4422 44220

Century / Solar Style Plasma 40 Amp Swirl Ring. Swirl Ring imparts a swirling current to stabilize the arc. Keep your plasma cutter working at peak performance with these replacement parts.

Price $28.45 Each
334-279-908 Nozzle Plasma 15/20 Amp 5pk Repl. 4421 44210 334-279-908 Nozzle Plasma 15/20 Amp 5pk Repl. 4421 44210

Century - Solar Style 15 / 20 Amp Plasma Cutting Nozzles. The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).

Price $24.95 5 Pack
334-279-908L Nozzle Plasma Extended 15/20 Amp 5pk 334-279-908L Nozzle Plasma Extended 15/20 Amp 5pk

Century - Solar Style 15 / 20 Amp Plasma Cutting Nozzles. The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).

Price $28.40 5 Pack
334-280-908 Nozzle Cap Plasma 20 Amp Repl. 4423 44230 334-280-908 Nozzle Cap Plasma 20 Amp Repl. 4423 44230

Century / Solar Style Nozzle Cap, Tapered Type. Nozzle Caps direct cooling air flow to the nozzle and workpiece.

Price $32.50 Each
512-087-908 O-Rings 20/40 15 20 50 Amp 2 pack Repl. 4405 44050 512-087-908 O-Rings 20/40 15 20 50 Amp 2 pack Repl. 4405 44050

Century / Solar Package of 2 O-Rings for 20/40, 15, 20 and 50 amp plasma cutters. The rubber O-Ring prevents air leaks which cause erratic cutting and cooling.

Price $3.32 2 Pack
Solar 2010 20 Amp Plasma Cutter Owners Guide Instruction Manual Solar 2010 20 Amp Plasma Cutter Owners Guide Instruction Manual

This Operators manual provides specific charger information for your specific model. This manual contains information such as the Important Safety Instructions, Usage and Maintenance of your Plasma Cutter. This document is provided as a download PDF format. We suggest you save it to your computer for future reference.
Model Coverage: 118-012, 2010

Price $8.00
   
 
118-012 Solar 15 amp plasma cutter (120 v.) 2010