Automotive tools & equipment

HVAC & Industrial supplies

Sales - parts -service

You are here: Home > Welder Parts - MIG > 117-012 YA205 Snap-On 130 amp MIG welder

117-012 YA205 Snap-On 130 amp MIG welder



117-012 Replacement Parts List
Item No.
Customer #
Description
1
410-746-010
Front Panel
2
312-045-000
Receptacle, Panel Mount
3
245-078-666
Power Light
4
860-523-000
Resistor Assembly, 25 Ohm, 50 Watt
5
213-018-200
Capacitor, 45,000 mf, 45 Volt DC
6
410-190-000
Buss Bar
7
216-042-000
Power Switch, 230 Volt AC, 40 Amp
9
4323
Drive Roller, 0.024 / 0.030 / 0.035

4324 Drive Roller Teflon
10
083-107-000 Scre3w, M6-1 x 3/4" Hex Head
11
410-325-000 Inlet Guide Tube
12
330-025-000 Drive Tension Spring
13
246-114-000 Drive Tension Screw
14
246-160-000
Drive Tension Knob
15
860-803-666
Drive Assembly
16
860-581-100
Drive Motor, 24 Volt DC
17
860-673-000
Plastic Nose
18
216-077-000
Momentary Paddle Switch
19
860-489-000
Spot Stitch Board
20
246-161-666
Handle
21
246-127-666
Knob 1"
23
860-644-000
Undercarriage with Connections
24
246-052-666
Switch, 9 Position
25
246-158-666
Knob, 2.75"
26
410-404-020
Drive Box Top
27
860-614-666
Main Circuit Board with Transistor
28
216-055-666
Triac Relay, 40 Amp
29
246-212-666
Gas Solenoid
30
312-066-666
Spindle Assembly
34
312-042-666
Slide Latch
35
860-984-666
Hood with Latch & Labels
36
880-041-888
Drive Transformer 230 Volt AC to 24 Volt DC
37
860-871-000
Umbilical Cord, 3'
39
541-020-000
Strain Relief
40
248-164-000
Power Cord, 30'
41
239-094-000
Terminal Block
44
860-627-666
Drive Head Lock Assembly
45
830-639-888
Main Weld Transformer
46
246-121-666
Thermostat, Stemco 402, open 200F, Close 180F
47
214-004-666
Diode
50
512-046-666
Rubber Mat (Not Shown)
51
245-060-000
Fuse, BAN30 or BLN30 (Not Shown)
53
246-120-000
Potentiometer, 5k, 1/4 Watt (Not Shown)
54
860-870-100
Umbilical Cord, 20' (Not Shown)
55
4320
Mig Gun Assembly 10' (Not Shown)
56
334-286-666
Gas Regulator (Not Shown)
57

Gas Hose (Not Shown)
58
079-127-000
Base Socket (Not Shown)
59
079-136-666
Pins for Base Socket (13) (Not Shown)
60
079-140-000
Keying Pins (need 2) (Not Shown)
61
860-647-666
Head Harness (Not Shown)
Sort By:
131-211-100 Mig Gas Conversion Kit 2111 131-211-100 Mig Gas Conversion Kit 2111

131-211-100 Mig Gas Conversion Kit 2111. Includes fixed regulator, 24 Volt Solenoid, Gas hose and clamps, fittings for hose and welder.

Discontinued
131-211-200 Mig Gas Regulator & Hose Kit 131-211-200 Mig Gas Regulator & Hose Kit

131-211-200 Mig Gas Regulator & Hose Kit. Includes fixed regulator, Gas hose and clamps, fittings for hose and welder.

Discontinued
216-055-666 Relay Triac 40 Amp Replaces Marquette # 43700007 216-055-666 Relay Triac 40 Amp

Relay Triac 40 Amp Replaces Marquette # 43700007

Price $39.95
216-079-666 24 Volt Drive Motor 216-079-666 24 Volt Drive Motor

216-079-666 24 Volt Drive Motor

Discontinued
221-006-666 Century Drive Transistor 221-006-666 Century Drive Transistor

221-006-666 Century Drive Transistor for 860-614-666 Circuit Board.

Price $28.48
239-052-908 Lincoln Cable Connector, Set #4-#1 (4031) 239-052-908 Lincoln Cable Connector, Set #4-#1 (4031)

Lincoln Cable Conncetor Set. Precision machined from special contour extended brass. Equipped with heat and oil resistance molded covers. Easily twists into position. Model 239-052-908. One pair 3/8” brass male plugs. Fits most Century Arc and MIG welders. For cable size #4-#1

Discontinued
246-086-666 Century Solenoid 24 Volt Air Service, replaces 246-212-666 and 43700008. 246-086-666 Century Solenoid 24 Volt Air Service

246-086-666 Century Solenoid 24 Volt Air Service, replaces 246-212-666 and 43700008, B7161370.

Discontinued
246-120-666  Potentiometer 5k Ohm 1/4 watt 246-120-666 Potentiometer 5k Ohm 1/4 watt

246-120-666  Potentiometer 5k Ohm 1/4 watt

Discontinued
310-119-500 Century Steel Drive Roller .030 .035 .045 4341 310-119-500 Century Steel Drive Roller .030 .035 .045 4341

310-119-500 Century Steel Drive Roller .030 .035 .045 4341. For use with steel welding wire in all Mig welders made by Century Mfg Co. Does Not Include key.

Discontinued
310-122-500 Century Steel Drive Roller .024 .030 .035 4323 310-122-500 Century Steel Drive Roller .024 .030 .035 4323

Century Drive Roller .024 .030 .035 in Part number 4323. For use with steel welding wire in all Mig welders made by Century Mfg Co. Does Not Include key.

Discontinued
310-154-500 Century Steel Serrated Drive Roller .045 4347. For use with Mig welders made by Century Mfg Co. 310-154-500 Century Steel Serrated Drive Roller .045 4347

310-154-500 Century Steel Serrated Drive Roller .045 4347. For use with Mig welders made by Century Mfg Co. Does Not Include "D" Or "Square" Stock Key.

Discontinued See 310-119-500
334-203-000 Nozzle, 1/2 Id 334-203-000 Nozzle, 1/2 Id (Each)

Tweco Style MIG Welding Nozzle, Recessed. (1 pack). Replaces Century/Lincoln part numbers: 4348, 43480, 334-203-100, 334-203-500, 334-203-908, M15578, Magnum 100, KP21T-50, 21-50. Works with most Century and Lincoln Electric welders.

Price $8.00
334-221-000 Trigger, Mig Gun 334-221-000 Trigger, Mig Gun

334-221-000 Trigger, Mig Gun

Price $39.50
334-227-000 Tube, Conductor Large Id 334-227-000 Tube, Conductor Large Id

334-227-000 Tube, Conductor Large Id

Price $61.55
334-228-000 Diffuser, Gas Mig Gun Large Id 334-228-000 Diffuser, Gas Mig Gun Large Id

Diffuser, Gas Mig Gun Large Id. Gas diffuser for the following MIG guns: 4320, 238-155-000, 238-155-100, 238-155-500, 238-224-000, 238-224-100.

Discontinued see KP35-50
KH710 Lincoln .025" Tweco Style Contact Tip (10 Pack). Same as KP11-25, KP2039-1B1, M15522, Mig023 KH710 Lincoln .025" Tweco Style Contact Tip (10 Pack)

KH710 Lincoln .025" Tweco Style Contact Tip (10 Pack). Same as KP11-25, KP2039-1B1, M15522, Mig023, Replaces Century and Marquette Part Numbers:4309, 43090, 334-159-000, 334-159-300, 334-159-908, M15522, KP11-25 & Others. Used on Century made welders model 117-001 to 117-090.

Price $13.95
KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035. KH712 Lincoln .035" Tweco Style Mig Contact Tip (10 Pack)

KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035. Replaces Century and Marquette Part Numbers: 4311, 43110, 334-161-000, M15524, KP11-35 & Others. Used on Century made welders model 117-001 to 117-090.

Price $13.95
KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035. KH713 Lincoln .045" Tweco Style Mig Contact Tip (10 Pack)

KH713 Lincoln .045" Tweco Style Mig Contact Tip (10 Pack) Replaces KP11-45, KP2039-4B1, M57242, Mig045, 43990, 334-202-300

Discontinued See KP11-45
KH727 Lincoln Nozzle, Spot Weld (each) KH727 Lincoln Nozzle, Spot Weld (each)

KH727 Lincoln Nozzle, Spot Weld (each). Replaces Century Part Numbers: 4329, 43290. 334-211-000, 334-211-100, 334-211-300, 334-211-500, 334-211-908, KP1956-1, KP21-62-FAS.

Discontinued
KP35-50 Diffuser, Gas Mig Gun Large Id KP35-50 Diffuser, Gas Mig Gun Large Id

Diffuser, Gas Mig Gun Large Id. Gas diffuser for the following MIG guns: 4320, 238-155-000, 238-155-100, 238-155-500, 238-224-000, 238-224-100.

Price $15.99
   
 
117-012 YA205 Snap-On 130 amp MIG welder