|
|
|
|
Bacharach's Monoxor® III is a continuous sampling instrument that quickly and accurately measures levels of CO between 0 and 2,000 ppm. In addition, the Monoxor® III is supplied with a stainless steel probe and five feet of tubing to sample CO found in flue gases of residential furnaces, combustion appliances, commercial and industrial boilers. An optional wireless IrDA printer provides a permanent record of the detected CO level. Applications
- CO safety checks on combustion stack gas and ambient air levels
- Analyzing indoor air quality and safety
- Furnace and boiler servicing or replacement
0019-8104 |
Monoxor® III CO Analyzer, includes 4 ‘AA’ batteries,
probe & hose assembly with integral water-trap / filter, and a hard
carrying case |
0019-8105 |
Monoxor III CO Analyzer, includes 4 ‘AA’ batteries, probe & hose
assembly with integral water-trap / filter, a hard carrying case, plus
an IrDA printer with accessories |
0024-1400 |
IrDA printer w/ disposable batteries |
0024-1229 |
IrDA printer, w/ rechargeable batteries |
0006-8733 |
Printer paper, 1 roll package |
0024-1310 |
Printer paper, 5 roll package |
0024-1265 |
Replacement CO sensor |
0024-7059 |
Calibration Kit (without gas) |
0024-0492 |
CO gas cylinder, 500 ppm |
0051-1994 |
CO gas cylinder, 100 ppm |
0024-1254 |
Battery eliminator |
0019-7110 |
Probe & Hose Assembly |
0007-1644 |
Filter Element for Water Trap, Package of 3 |
0024-1243 |
Battery charger for printer 24-1229 |
0024-1244 |
Replacement battery pack for printer 24-1229 |
Warning: This product may expose you to chemicals including lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
|
|
|
|
|
|
|
|
|
|
|
|
|
Product Features
Specifications:
- Range: 0-2,000 ppm
- Resolution: 1 ppm
- Accuracy: ±5% of reading or 10 ppm, whichever is greater
- Operating Temp.:
- Instrument: 32-104°F (0-40°C)
- Probe: 1,000°F (538°C)
- Battery Life: 24 hours continuous (minimum of 16 hours)
- Display: Four-digit LCD display w/backlight
- Power: 4 'AA' Alkaline Batteries
- Printer Port: IrDA or HP protocol
- Weight: 16 oz. with batteries
- Dimensions: 7.5"H x 3.1"W x 2.1"D (190mm x 79mm x 53mm)
- Warranty: 2 years, including sensor
|
|
|
|
|
|
|