0019-0510 Bacharach Informant Leak Detector Sensor

Home > Leak Detector Repair Parts & Accessories > Bacharach Leak Detector Repair Parts > Bacharach Informant Leak Detector Repair Parts >

Price $49.95

Product Code: 0019-0510

Qty:

Description

The Informants electrochemical heated diode sensor is located in the tip of the probe. This specialized sensor will operate for about 100 hours. When that amount of time has passed, or you feel you may have missed some refrigerant leaks, you should replace the sensor.

Turn off the leak detector
Locate the end of the probe and twist off (counter clockwise) the tip protector. Pull the sensor (the small "can" with the hole in the top) straight out to unplug it. If the detector was just on for a while, the sensor will be warm but it will not burn you
Remove the replacement sensor from the protective foil package
Carefully align the 3 leads (small wires coming out the bottom of the can) on the sensor with the 3 sockets in the end of the probe. Insert the leads into the sockets and gently press the sensor's leads into the end of the probe. NOTE: You must be careful not to bend the sensor leads because this can cause erratic operation (see Troubleshooting.)
Take this opportunity to change the filter
Place the tip protector over the sensor and tighten snugly by turning the cap in clockwise direction, being careful not to over-tighten and damage the tip protector

Product Features

Inficon Sensor Tip Filter Diagram

Browse for more products in the same category as this item:

Leak Detector Repair Parts & Accessories > Bacharach Leak Detector Repair Parts > Bacharach Informant Leak Detector Repair Parts


0019-0507 Bacharach Combustible Probe Tip (Red), Informant 2	0019-0499 Bacharach Rep Combustible Gas Sensor, Informant 2	0019-0438 Bacharach Co Sensor, High Range, Monoxor II High	0013-7022 Bacharach Draft Gauge -15Mm W
$8.78	$40.95	$300.00	$195.98